Cross-Linked Luminescent Polymers Based on β-Diketone-Modified Polysiloxanes and Organoeuropiumsiloxanes

Low-dielectric benzocyclobutenyl polysiloxane resin: spatial structure design and photosensitive patterning performance

With the development of miniaturization and the high integration of semiconductor devices, higher performance requirements are put forward for polymer photoresists. In this paper, a benzocyclobutene-based polysiloxane photosensitive resin was prepared by sol-gel method, which was well patterned and cured quickly after UV light curing, with a minimum line width and line spacing of 10 μm. The benign combination of benzocyclobutene group (BCB) and polysiloxane in the resin makes the resin exhibit good low dielectric properties (k = 2.79) and excellent thermal properties and mechanical properties, which is different from traditional thermosetting resins.

Iridium(III)-Incorporating Self-Healing Polysiloxanes as Materials for Light-Emitting Oxygen Sensors

Polymer-metal complexes (PMCs) based on poly(2,2'-bipyridine-4,4'-dicarboxamide-co-polydimethylsiloxanes) with cyclometalated di(2-phenylpyridinato-C2,N')iridium(III) fragments and cross-linked by Zn2+ (Zn[Ir]-BipyPDMSs) or Ir3+ (Ir[Ir]-BipyPDMSs) represent flexible, stretchable, phosphorescent, and self-healing molecular oxygen sensors. PMCs provide strong phosphorescence at λem = 595-605 nm. Zn[Ir]-BipyPDMS with PDMS chain length of Mn = 5000 has the highest quantum yield of 9.3% and is a molecular oxygen sensor at different O2 concentrations (0-100 vol%) compared to Ir[Ir]-BipyPDMSs. A Stern-Volmer constant is determined for Zn[Ir]-BipyPDMS as KSV = 0.014%-1, which is similar to the reported oxygen-sensitive iridium(III) complexes. All synthesized PMCs exhibit high elongation at break (up to 1100%) and self-healing efficiency (up to 99%).

Self-Healing Silicone Materials: Looking Back and Moving Forward

This review is dedicated to self-healing silicone materials, which can partially or entirely restore their original characteristics after mechanical or electrical damage is caused to them, such as formed (micro)cracks, scratches, and cuts. The concept of self-healing materials originated from biomaterials (living tissues) capable of self-healing and regeneration of their functions (plants, human skin and bones, etc.). Silicones are ones of the most promising polymer matrixes to create self-healing materials. Self-healing silicones allow an increase of the service life and durability of materials and devices based on them. In this review, we provide a critical analysis of the current existing types of self-healing silicone materials and their functional properties, which can be used in biomedicine, optoelectronics, nanotechnology, additive manufacturing, soft robotics, skin-inspired electronics, protection of surfaces, etc.

Polydimethylsiloxanes with Grafted Dibenzoylmethanatoboron Difluoride: Synthesis and Properties

A method for the preparation of polydimethylsiloxanes with grafted methoxy-substituted dibenzoylmethanatoboron difluoride has been described. The structures of prepared polymers were confirmed using NMR, IR spectroscopy and gel permeation chromatography methods. Their thermal properties were investigated using thermal gravimetric analysis, differential scanning calorimetry and thermomechanical analysis. The prepared polymers had good thermal (Td5% up to 393 °C) and thermo-oxidative (Td5% = 413 °C) stability. The polymers started to transit in a viscous flow state at about 40 °C (for 3 a) and at about 20 °C (for 3 b). The viscoelastic characteristics of prepared polymers were determined in the sinusoidal oscillating vibrations mode. It was shown that the studied polymers at low frequencies at room temperature are viscoelastic fluids (G′ < G″). Increasing the frequency led to inversion (crossover) of dependences G′ and G″, which indicated the transition of polymers from viscous to elastomeric behavior characteristics, and the beginning of the formation of a physical network. Optical properties were studied using electron absorption, steady-state and time-resolved fluorescence spectroscopy. It was shown that intramolecular H-dimers exist in the ground state. The polymers studied had a bright fluorescence in the solution and in the solid state, consisting of bands of monomer and excimer emission. Thermally-activated delayed fluorescence was observed in the solution and the solid state. The prepared polymers possess intriguing properties that make them useful as optical materials, sensors or imaging agents.