Variations in Microstructural and Physicochemical Properties of Soy Wax/Soybean Oil-Derived Oleogels Using Soy Lecithin

Impact of binary mixtures of natural waxes in mechanical properties and microstructure of oleogels

BACKGROUND

Solid fats are critical to obtaining a wide range of food texture and quality characteristics, but their consumption is strongly associated with higher cardiovascular disease risks. Structuring unsaturated oils with natural waxes into oleogels (OG) is an innovative solution to develop fat mimics with a healthier profile.

RESULTS

Soy wax (SW), beeswax (BW) and carnauba wax (CW), have been used in binary mixtures of waxes, aiming to understand their interactions and influence on OG quality properties and microstructural characteristics. In the present study, OGs were produced using binary wax mixtures and analyzed for texture, color, smoke point, microstructure, Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Wax combinations led to antagonistic (mixtures with SW) and synergistic interactions (BW/CW) based on their mechanical properties. At the microstructural level BW/CW blends showed a reduction in crystal size and with a more compact structure. XRD and FTIR spectra revealed a packing of orthorhombic perpendicular subcell for most OGs, whereas SW produced samples with an arrangement with β´ crystals, characteristic of edible solid fats. Additionally, when compared to commercial beef fat, BW/CW mixtures showed similar quality attributes indicating that they could act as fat mimic.

CONCLUSION

The combined analysis of microstructure, spectroscopic and mechanical properties enhanced the understanding of how the nature of the interactions between waxes and lipid phases impact in the final quality of the structured oils. The study's insights indicate that binary wax combinations can efficiently replace solid fats, offering healthier alternatives at the same time as preserving desired sensory characteristics. © 2024 Society of Chemical Industry.

Lecithin's Roles in Oleogelation

This manuscript analyzes the research considering the exploitation of lecithin in oleogelation. The main objective of the work was to gather, analyze, and extract from the existing research data the information that enables us to identify lecithin-dependent roles. Oleogelation is still under research, while using various oleogelators and structurants provides changes on different physico-chemical levels. Multivariable formulations do not facilitate the elucidation of the specific role of any of them. Lecithin, due to its complex structure, big molecule, and amphiphilic nature, can provide different functionalities in complex matrices like oleogels. Therefore, this review identifies and categorizes the functionality of lecithin in oleogelation into four main roles: 1. oleogelation facilitator; 2. structure-forming impact; 3. texturing agent; and 4. functionality provider. Also, the origin and structure-forming characteristics of lecithin, as well as a short summary of the oleogelation process itself, are presented. Our critical analysis allowed us to identify the roles of lecithin in the oleogelation process and categorized them as follows: oleogelator, emulsifier, structural organization facilitator, structural modifier, crystal characteristics modifier, self-assembly promoter, thermal behavior changer, hydrogen-bonded networks promoter, hydrogel structure modifier, texture and structural modifier, gel-like state promoter, oil capacity enhancer, functionality provider, shelf life extender, and bioavailability and bioaccessibility enhancer. Lecithin came out as an important and multifunctional compound whose applications in oleogelation need to be thoroughly pre-considered. It is crucial to grasp all the possible roles of used compounds to be able to predict the final functionality and characteristics of formed oleogel matrices.

Preparation of Citral Oleogel and Antimicrobial Properties

The objective of this study was to analyze a natural and safe oleogel with antimicrobial properties that can replace animal fats while lengthening the product's shelf life. The oleogel was created using direct dispersion (MG-SO), and its material characterization exhibited the exceptional performance of the hybrid gelant. Additionally, citral was integrated into the oil gel to prepare the citral oleogel (MG-SO). The antimicrobial nature of the material was examined and the findings revealed that it inhibited the growth of various experimental model bacteria, including Escherichia coli, Staphylococcus aureus, Aspergillus niger, Botrytis cinerea, and Rhizopus stolonifer. In addition, the material had a comparable inhibitory impact on airborne microorganisms. Lastly, MG-SON was utilized in plant-based meat patties and demonstrated an ability to significantly reduce the growth rate of microorganisms.

Waxy Oleogels for Partial Substitution of Solid Fat in Margarines

One of the research directions of oleogels is to study the possibility of their practical application in the food industry as an alternative to solid fats. In this work, the possibility of replacing solid fat in margarine (fat content 82.5%) with oleogels was evaluated. The oleogel content varied from 10 to 50% of the fat phase. The concentration of gelator for which beeswax or wax components (9:1 combination of beeswax and hydrocarbons) were used represented 3% in oleogels. The fatty acid composition of the fat components used, their textural characteristics, and their color were studied. The following physicochemical and rheological properties of margarines were determined: color values, textural and thermal characteristics, and sensory properties. The data obtained were processed using principal component analysis (PCA). Oleogels were characterized by lower textural properties compared to commercial fat (CF), but a lower content of saturated fatty acids. When using oleogels, the color characteristics of the margarines changed insignificantly. A decrease in textural and organoleptic properties was shown when using more than 30% oleogel in the composition of margarines. It was found that an increase in the proportion of oleogel leads to a decrease in the melting enthalpy of margarines. The margarines, depending on the ratio of oleogel in the fat phase, were characterized by a content of saturated fatty acids reduced by 7-35% and increased by a 18-92% level of polyunsaturated fatty acids. Thus, the application of oleogels in margarine technology makes it possible to adjust the fatty acid composition while improving the physicochemical properties.

Structuring of Cold Pressed Oils: Evaluation of the Physicochemical Characteristics and Microstructure of White Beeswax Oleogels

The aim of the study was to characterize the gelling effect of beeswax (BW) using different types of cold pressed oil. The organogels were produced by hot mixing sunflower oil, olive oil, walnut oil, grape seed oil and hemp seed oil with 3%, 7% and 11% beeswax. Characterization of the oleogels was done using Fourier transform infrared spectroscopy (FTIR), the chemical and physical properties of the oleogels were determined, the oil binding capacity was estimated and the SEM morphology was studied. The color differences were highlighted by the CIE Lab color scale for evaluating the psychometric index of brightness (L*), components a and b. Beeswax showed excellent gelling capacity at 3% (w/w) of 99.73% for grape seed oil and a minimum capacity of 64.34%for hemp seed oil. The value of the peroxide index is strongly correlated with the oleogelator concentration. Scanning electron microscopy described the morphology of the oleogels in the form of overlapping structures of platelets similar in structure, but dependent on the percentage of oleogelator added. The use in the food industry of oleogels from cold-pressed vegetable oils with white beeswax is conditioned by the ability to imitate the properties of conventional fats.

Oleogels-Innovative Technological Solution for the Nutritional Improvement of Meat Products

Food products contain important quantities of fats, which include saturated and/or unsaturated fatty acids. Because of a proven relationship between saturated fat consumption and the appearance of several diseases, an actual trend is to eliminate them from foodstuffs by finding solutions for integrating other healthier fats with high stability and solid-like structure. Polyunsaturated vegetable oils are healthier for the human diet, but their liquid consistency can lead to a weak texture or oil drain if directly introduced into foods during technological processes. Lately, the use of oleogels that are obtained through the solidification of liquid oils by using edible oleogelators, showed encouraging results as fat replacers in several types of foods. In particular, for meat products, studies regarding successful oleogel integration in burgers, meat batters, pâtés, frankfurters, fermented and bologna sausages have been noted, in order to improve their nutritional profile and make them healthier by substituting for animal fats. The present review aims to summarize the newest trends regarding the use of oleogels in meat products. However, further research on the compatibility between different oil-oleogelator formulations and meat product components is needed, as it is extremely important to obtain appropriate compositions with adequate behavior under the processing conditions.

The Feasibility of Shellac Wax Emulsion Oleogels as Low-Fat Spreads Analyzed by Means of Multidimensional Statistical Analysis

Shellac wax-based oleogel emulsions were studied with a three level two factorial design in order to find an optimal formulation for a spread formulation. Rheological, textural, colorimetry, and stability analysis were conducted to assess the performance of oleogel emulsions. FTIR spectra were also compared. The similarities between the samples were studied using cluster analysis. Analysis of variance (ANOVA) demonstrates that (i) the texture is influenced by the wax concentration, (ii) the rheology and stability by both the considered numeric factors (wax and water concentration) and their interaction, and (iii) the color by both factors. The emulsions containing 7% (m/m) shellac oleogels behaved like the strongest systems, (G′ & GLVR > 30,000 Pa) and exhibited the highest value of the G′-G″ cross-over. The lowest oil binding capacity (OBC) was 99.88% for the sample with 3% (m/m) shellac and 20% (m/m) water. The whiteness index (Windex) varied between 58.12 and 78.50. The optimization process indicated that a formulation based on 4.29% (m/m) shellac wax and 24.13% (m/m) water was suitable as a low-fat spread.