Improved Denitrification Performance of Polybutylene Succinate/Corncob Composite Carbon Source by Proper Pretreatment: Performance, Functional Genes and Microbial Community Structure

Effect of hydraulic residence time on nitrogen removal from a synthetic mariculture wastewater using a bench-scale recirculating bioreactor embedded with aerobic denitrifying bacteria Marinobacter alkaliphilus strain JY28

Beads loaded with tea dregs powder and immobilized aerobic denitrifying bacteria (Marinobacter alkaliphilus strain JY28) were prepared by cross-linking sodium alginate and polyvinyl alcohol. The beads were subsequently utilized for nitrogen removal in treatment of wastewater from a marine recirculating aquaculture system (MRAS). The effects of hydraulic residence time (HRT) on nitrogen removal efficiency, microbial community succession, and the physicochemical properties and kinetic behaviors of the immobilized bacterial beads were investigated. The results indicated that the highest NO3--N removal rate was 99.4 ± 0.6 % at an HRT of 10 h, while the cumulative NO2--N concentration remained at its lowest level (0.04 ± 0.05 mg L-1). Furthermore, the peak maximum specific nitrogen removal rates (μmax) for NO3--N and NO2--N were found to be 16.12 mg L-1·h-1 and 8.61 mg L-1·h-1, respectively. The surface of the immobilized bacterial beads was rough and effectively bound Marinobacter alkaliphilus strain JY28. The interior of the beads possessed an irregular honeycomb-like and porous structure, favorable for the immobilization and proliferation of Marinobacter alkaliphilus strain JY28. The presence of the ring structure in the functional bonds enhanced both the mechanical strength and the immobilized bacterial beads stability. Marinobacter alkaliphilus strain JY28 was retained in the bacterial beads and consistently maintained its dominance during the whole experimental process. The results lay a theoretical foundation for application of immobilized bacterial beads for highly efficient nitrogen removal in MRAS wastewater treatment.

The corncobs-loaded iron nanoparticles enhanced mechanism of denitrification performance in microalgal-bacterial aggregates system when treating low COD/TN wastewater

To improve denitrification efficiency of microalgal-bacterial aggregates (MABAs) when treating low carbon to nitrogen (C/N) ratio wastewater, CK (the biological control), C1 (untreated corncobs), C2 (alkali-treated corncobs), CFe1 (C1 loaded iron nanoparticles) and CFe2 (C2 loaded iron nanoparticles) five groups of experiments were installed under artificial light (1600 lm). After 36 h of experiment, NO3--N was almost completely converted in CFe1 following by CFe2 when the initial concentration was 60.1 mg/L, whose NO3--N conversion rates were 6.2 and 3.4 times faster than the CK group, respectively. The result showed that the corncobs-loaded iron nanoparticles (CFe1, CFe2) had the potential to promote denitrification process and the CFe1 was more effective. Meanwhile, the CFe1 and CFe2 resulted in a decreased content in extracellular polymeric substances (EPS) secretion because iron nanoparticles (Fes) promoted electron transport and alleviated the nitrate stress. Moreover, the electrochemical analysis of EPS showed that the corncobs and corncobs-loaded iron nanoparticles improved the electron transport rate and redox active substances production. The increase in electron transport activity (ETSA), adenosine triphosphate (ATP) and nicotinamide adenine dinucleotide (NADH) also indicated that the CFe1 and CFe2 promoted microbial metabolic activity and the electron transport rate in MABAs. In addition, the CFe1 group enhanced the enrichment of Proteobacteria, Patescibacteria, Chlorophyta and Ignavibacteriae, which was contributed to the nitrogen removal performance of MABAs. In summary, the enhancement mechanism of corncobs-loaded iron nanoparticles on denitrification process of MABAs was depicted through EPS secretion, electrochemical characteristics, microbial metabolic activity and microbial community. The article provides a viable program for enhancing the denitrification performance of MABAs when treating low C/N wastewater.

The effect of arbuscular mycorrhizal fungi on biological activity and biochemical properties of soil under vetch growing conditions in calcareous soils

Due to soils from arid regions with high lime and low organic matter content, farmers receive low yields along with high costs of agricultural inputs, which causes them to look for a solution. In this context, Arbuscular mycorrhizal fungi (AMF) have great potential to reduce fertilizer use by mediating soil nutrient cycles. However, little is known about studies of AMF inoculum on microbial biomass carbon (C), nitrogen (N), and phosphorus (P) cycling during vetch plant vegetation in calcareous areas. In this study, changes in soil biogeochemical properties related to soil C, N, and P cycling were investigated with five different AMF inoculations under vetch (common Vetch (CV; Vicia sativa L.) and Narbonne Vetch (NV; Vicia narbonensis L.) growing conditions. For the field study, a total of five different mycorrhizae were used in the experiment with the random plots design. AMF inoculation decreased the lime content of the soil, and the highest decrease was observed in NV with Glomus (G.) intraradices + G. constrictum + G. microcarpum inoculation (24.41 %). The highest MBC content was recorded in CV vetch G. intraradices (1176.3 mg C kg-1) and the highest MBN content in NV vetch G. intraradices + G. constrictum + G. microcarpum (1356.9 mg C kg-1). CAT activity of soils was highest in CV vetch G. intraradices (31.43 %) and lowest in NV vetch G. intraradices + G. constrictum + G. microcarpum (72.88 %), urease enzyme activity decreased in all treatments except G. constrictum + Gigaspora sp. and G. mosseae inoculations in CV. The highest DHG activity was detected in GF (15.72 %) AMFs in CV and GI (21.99 %) in NV. APA activity was highest in Glomus constrictum + Gigaspora sp. (23.33 %) in CV and Glomus fasciculatum (10.08 %) in NV. In CV plots, G. intraradices + G. constrictum + G. microcarpum (91.67 %) isolates had the highest and G. intraradices community had the lowest RC% (97.33 %) in mixed mycorrhiza species, while in NV plots G. fasciculatum inoculum had the highest and G. intraradices community had the lowest RC%. This study has important implications for the application of AMF for sustainable agriculture. When the results of the study were evaluated, the most effective AMF isolates in terms of C, N, and P cycles were G. constrictum + G. fasciculatum + Gigaspora sp. in Common vetch variety, and G. intraradices in Narbonne vetch variety.

The Microbiome and Antibiotic Resistome in Soil under Biodegradable Composite Carbon Source Amendment

The decomposition of biodegradable composite carbon sources generates a large amount of biodegradable microplastics, which may not only furnish microbial denitrification, but might also pose potential environmental risks. In the present study, the effects of different dosages of a biodegradable composite carbon source on the microbial communities, the nitrogen metabolic pathways and the antibiotic resistome were explored through Illumina MiSeq sequencing analysis and metagenomic analysis. The results of partial least-square discriminant analysis (PLS-DA) and analysis of similarity (ANOSIM) demonstrated that the response of the bacterial community to a biodegradable composite carbon source was more obvious than the fungal community. The application of biodegradable microplastics diminished the complexity of the microbial communities to some extent and obviously stimulated denitrification. Antibiotics resistance gene (ARG) dispersal was not evidently accelerated after the addition of biodegradable composite carbon source. Lysobacter, Methylobacillus, Phyllobacterium, Sinorhizobium, Sphingomonas from Proteobacteria and Actinomadura, Agromyces, Gaiella and Micromonospora from Actinobacteria were the major ARG hosts. Overall, the addition of a biodegradable composite carbon source shaped microbial communities and their antibiotic resistance profiles in this study.

Reinforced Bioremediation of Excessive Nitrate in Atrazine-Contaminated Soil by Biodegradable Composite Carbon Source

Bioremediation is a good alternative to dispose of the excessive nitrate (NO₃^-) in soil and alleviate the secondary salinization of soil, but the presence of atrazine in soil interferes with the bioremediation process. In the present study, the biodegradable composite carbon source with different dosages was added to the atrazine-contaminated soil to intensify the bioremediation of excessive NO₃^-. The atrazine-contaminated soil with a 25 g/kg composite carbon source achieved the optimal NO₃^- removal performance (92.10%), which was slightly higher than that with a 5 g/kg composite carbon source (86.15%) (p > 0.05). Unfortunately, the negative effects of the former were observed, such as the distinctly higher emissions of N₂O, CO₂ and a more powerful global warming potential (GWP). Microbial community analysis showed that the usage of the composite carbon source clearly decreased the richness and diversity of the microbial community, and greatly stimulated nitrogen metabolism and atrazine degradation (p < 0.05). To sum up, the application of a 5 g/kg composite carbon source contributed to guaranteeing bioremediation performance and reducing adverse environmental impacts at the same time.