Cellulose-Reinforced Polylactic Acid Composites for Three-Dimensional Printing Using Polyethylene Glycol as an Additive: A Comprehensive Review

Challenges to Improve Extrusion-Based Additive Manufacturing Process of Thermoplastics toward Sustainable Development

This review aims to present the different approaches to lessen the environmental impact of the extrusion-based additive manufacturing (MEX) process of thermoplastic-based resins and protect the ecosystem. The benefits and drawbacks of each alternative, including the use of biomaterials or recycled materials as feedstock, energy efficiency, and polluting emissions reduction, have been examined. First, the technological option of using a pellet-fed printer was compared to a filament-fed printer. Then, common biopolymers utilized in MEX applications are discussed, along with methods for improving the mechanical properties of associated printed products. The introduction of natural fillers in thermoplastic resins and the use of biocomposite filaments have been proposed to improve the specific performance of printed items, highlighting the numerous challenges related to their extrusion. Various polymers and fillers derived from recycling are presented as feeding raw materials for printers to reduce waste accumulation, showing the inferior qualities of the resulting goods when compared to printed products made from virgin materials. Finally, the energy consumption and emissions released into the atmosphere during the printing process are discussed, with the potential for both aspects to be controlled through material selection and operating conditions.

3D bioprinting in bioremediation: a comprehensive review of principles, applications, and future directions

Bioremediation is experiencing a paradigm shift by integrating three-dimensional (3D) bioprinting. This transformative approach augments the precision and versatility of engineering with the functional capabilities of material science to create environmental restoration strategies. This comprehensive review elucidates the foundational principles of 3D bioprinting technology for bioremediation, its current applications in bioremediation, and the prospective avenues for future research and technological evolution, emphasizing the intersection of additive manufacturing, functionalized biosystems, and environmental remediation; this review delineates how 3D bioprinting can tailor bioremediation apparatus to maximize pollutant degradation and removal. Innovations in biofabrication have yielded bio-based and biodegradable materials conducive to microbial proliferation and pollutant sequestration, thereby addressing contamination and adhering to sustainability precepts. The review presents an in-depth analysis of the application of 3D bioprinted constructs in enhancing bioremediation efforts, exemplifying the synergy between biological systems and engineered solutions. Concurrently, the review critically addresses the inherent challenges of incorporating 3D bioprinted materials into diverse ecological settings, including assessing their environmental impact, durability, and integration into large-scale bioremediation projects. Future perspectives discussed encompass the exploration of novel biocompatible materials, the automation of bioremediation, and the convergence of 3D bioprinting with cutting-edge fields such as nanotechnology and other emerging fields. This article posits 3D bioprinting as a cornerstone of next-generation bioremediation practices, offering scalable, customizable, and potentially greener solutions for reclaiming contaminated environments. Through this review, stakeholders in environmental science, engineering, and technology are provided with a critical appraisal of the current state of 3D bioprinting in bioremediation and its potential to drive forward the efficacy of environmental management practices.

Biodegradable UV-Protective Composite Film from Cellulosic Waste: Utilisation of Cotton Gin Motes as Biocomponent

With an increase in environmental pollution and microplastic problems, it is more urgent now to replace non-biodegradable films with biodegradable films that are low-cost and from renewable resources. Cotton gin motes (GM), a type of cellulosic waste that is generated from cotton ginning, is an excellent candidate for fabricating biodegradable films due to its properties and abundance. In this study, GM was first mechanically milled into a fine powder, followed by compounding with polycaprolactone (PCL) and extruded to produce composite pellets which were then compress-moulded into composite films. This environmentally friendly process used physical processing and all the materials were consumed in the process without generating any waste residue. To improve the compatibility and mixing properties between GM and PCL, the use of a plasticiser (polyethylene glycol) was considered. A high content of GM powder (up to 50%) was successfully compounded with the polymer. The SEM images of the composite films showed smooth surface morphology and well-distributed GM powder in the PCL matrix. The added advantage of compounding GM with the polymer matrix was that the composite film developed UV-shielding properties due to the presence of lignin in the GM powder. This property will be critical for films used in UV-resistance applications. Furthermore, the composite even with high GM content (50%), showed good mechanical properties, with 9.5 MPa yield strength and 442% elongation, which was only a 50% decrease in elongation when compared with clear PCL film. The soil biodegradation of GM composite films under controlled temperature (20 °C) and humidity (50%) for 1 month showed around 41% weight loss. Overall, this study demonstrates the potential of GM to be used as a biodegradable and UV-protective composite film for a wide array of applications, such as packaging and UV-protective coverings.