1
|
Owen R, Bahmaee H, Claeyssens F, Reilly GC. Comparison of the Anabolic Effects of Reported Osteogenic Compounds on Human Mesenchymal Progenitor-derived Osteoblasts. Bioengineering (Basel) 2020; 7:E12. [PMID: 31972962 PMCID: PMC7148480 DOI: 10.3390/bioengineering7010012] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/29/2019] [Revised: 01/13/2020] [Accepted: 01/15/2020] [Indexed: 01/10/2023] Open
Abstract
There is variability in the reported effects of compounds on osteoblasts arising from differences in experimental design and choice of cell type/origin. This makes it difficult to discern a compound's action outside its original study and compare efficacy between compounds. Here, we investigated five compounds frequently reported as anabolic for osteoblasts (17β-estradiol (oestrogen), icariin, lactoferrin, lithium chloride, and menaquinone-4 (MK-4)) on human mesenchymal progenitors to assess their potential for bone tissue engineering with the aim of identifying a potential alternative to expensive recombinant growth factors such as bone morphogenetic protein 2 (BMP-2). Experiments were performed using the same culture conditions to allow direct comparison. The concentrations of compounds spanned two orders of magnitude to encompass the reported efficacious range and were applied continuously for 22 days. The effects on the proliferation (resazurin reduction and DNA quantification), osteogenic differentiation (alkaline phosphatase (ALP) activity), and mineralised matrix deposition (calcium and collagen quantification) were assessed. Of these compounds, only 10 µM MK-4 stimulated a significant anabolic response with 50% greater calcium deposition. Oestrogen and icariin had no significant effects, with the exception of 1 µM icariin, which increased the metabolic activity on days 8 and 22. 1000 µg/mL of lactoferrin and 10 mM lithium chloride both significantly reduced the mineralised matrix deposition in comparison to the vehicle control, despite the ALP activity being higher in lithium chloride-treated cells at day 15. This demonstrates that MK-4 is the most powerful stimulant of bone formation in hES-MPs of the compounds investigated, highlighting its potential in bone tissue engineering as a method of promoting bone formation, as well as its prospective use as an osteoporosis treatment.
Collapse
Affiliation(s)
- Robert Owen
- Department of Materials Science and Engineering, INSIGNEO Institute for In Silico Medicine, The Pam Liversidge Building, Sir Frederick Mappin Building, Mappin Street, Sheffield S1 3JD, UK; (H.B.); (F.C.); (G.C.R.)
- Department of Materials Science and Engineering, University of Sheffield, Kroto Research Institute, Sheffield S3 7HQ, UK
| | - Hossein Bahmaee
- Department of Materials Science and Engineering, INSIGNEO Institute for In Silico Medicine, The Pam Liversidge Building, Sir Frederick Mappin Building, Mappin Street, Sheffield S1 3JD, UK; (H.B.); (F.C.); (G.C.R.)
- Department of Materials Science and Engineering, University of Sheffield, Kroto Research Institute, Sheffield S3 7HQ, UK
| | - Frederik Claeyssens
- Department of Materials Science and Engineering, INSIGNEO Institute for In Silico Medicine, The Pam Liversidge Building, Sir Frederick Mappin Building, Mappin Street, Sheffield S1 3JD, UK; (H.B.); (F.C.); (G.C.R.)
- Department of Materials Science and Engineering, University of Sheffield, Kroto Research Institute, Sheffield S3 7HQ, UK
| | - Gwendolen C. Reilly
- Department of Materials Science and Engineering, INSIGNEO Institute for In Silico Medicine, The Pam Liversidge Building, Sir Frederick Mappin Building, Mappin Street, Sheffield S1 3JD, UK; (H.B.); (F.C.); (G.C.R.)
| |
Collapse
|
2
|
Sun F, Chen J, Jin S, Wang J, Man Y, Li J, Zou Q, Li Y, Zuo Y. Development of biomimetic trilayer fibrous membranes for guided bone regeneration. J Mater Chem B 2019; 7:665-675. [PMID: 32254799 DOI: 10.1039/c8tb02435a] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
Abstract
in order to build fibrous bone tissue scaffolds for guided bone regeneration and to mimic the trilayer structure and the multifunctional properties of the natural periosteum, we fabricated two fibrous trilayer membranes by conjugate electrospinning technology, in which poly(ε-caprolactone) (PCL) fiber was designed as an outer layer, the mixed fibers of PCL and polyurethane (co-PUPCL) as the interlayer, and degradable polyurethane fibers with or without nano-hydroxyapatite (n-HA) as the inner layer (PUHA or PU). The microstructure and characteristics of the trilayer membranes were evaluated and different monolayer fibers were fabricated as the contrast samples. The tensile strength values of each layer increased from the inner layer to the outer layer in the designed structure, while the step-by-step electrospinning method produced good adhesion of different layers. Furthermore, the degradable properties and hydrophilicity of the layers changed with dissymmetric fibrous structures. Cell proliferation assay and cell morphology observation indicated that the PUHA inner fibrous layer exhibited better cell attachment and proliferation than PU. In addition, the osteogenicity of the PUHA fibrous layer has been attested through protein expression by the differentiation of rat mesenchymal stem cells (rMSCs) into the osteogenic lineage. Cell infiltration testing on the two sides of the trilayer membranes in vitro and in vivo showed that the inner layer had good cellular penetration deep into the scaffolds, whereas the cells were barred by the outer layer. We have developed a trilayer structured membrane with different polymer fibers to replicate the natural periosteum by improving functional outcomes, which is a promising fibrous scaffold for clinical use in the repair of destroyed bone.
Collapse
Affiliation(s)
- Fuhua Sun
- Research Center for Nano Biomaterials, Analytical & Testing Center, Sichuan University, Chengdu 610064, P. R. China.
| | | | | | | | | | | | | | | | | |
Collapse
|
3
|
Cui C, Wen M, Zhou F, Zhao Y, Yuan X. Target regulation of both VECs and VSMCs by dual-loading miRNA-126 and miRNA-145 in the bilayered electrospun membrane for small-diameter vascular regeneration. J Biomed Mater Res A 2018; 107:371-382. [PMID: 30461189 DOI: 10.1002/jbm.a.36548] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/22/2018] [Revised: 08/18/2018] [Accepted: 08/29/2018] [Indexed: 11/10/2022]
Abstract
Clinical utility of small-diameter vascular grafts is still challenging in blood vessel regeneration owing to thrombosis and intimal hyperplasia. To cope with the issues, modulation of gene expression via microRNAs (miRNAs) could be a feasible approach by rational regulating physiological activities of both vascular endothelial cells (VECs) and vascular smooth muscle cells (VSMCs). Our previous studies demonstrated that individually loaded miRNA-126 (miR-126) or miRNA-145 (miR-145) in the electrospun membranes showed the tendency to promote vascular regeneration. In this work, the bilayered electrospun graft in 1.5-mm diameter was developed by emulsion electrospinning to dual-load miR-126 and miR-145 for target regulation of both VECs and VSMCs, respectively. Accelerated release of miR-126 was achieved by introducing poly(ethylene glycol) in the inner electrospun poly(ethylene glycol)-b-poly(l-lactide-co-caprolactone) ultrafine fibrous membrane, reaching 61.3 ± 1.2% of the cumulative release in the initial 10 days, whereas the outer electrospun poly(l-lactide-co-glycolide) membrane composed of microfibers fulfilled prolonged release of miR-145 for about 56 days. In vivo tests suggested that dual-loading with miR-126 and miR-145 in the bilayered electrospun membranes could modulate both VECs and VSMCs for rapid endothelialization and hyperplasia inhibition as well. It is reasonably expected that dual target-delivery of miR-126 and miR-145 in the electrospun vascular grafts has effective potential for small-diameter vascular regeneration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 371-382, 2019.
Collapse
Affiliation(s)
- Ce Cui
- School of Materials Science and Engineering, and Tianjin Key Laboratory of Composite and Functional Materials, Tianjin University, Tianjin, 300350, China
| | - Meiling Wen
- School of Materials Science and Engineering, and Tianjin Key Laboratory of Composite and Functional Materials, Tianjin University, Tianjin, 300350, China
| | - Fang Zhou
- School of Materials Science and Engineering, and Tianjin Key Laboratory of Composite and Functional Materials, Tianjin University, Tianjin, 300350, China
| | - Yunhui Zhao
- School of Materials Science and Engineering, and Tianjin Key Laboratory of Composite and Functional Materials, Tianjin University, Tianjin, 300350, China
| | - Xiaoyan Yuan
- School of Materials Science and Engineering, and Tianjin Key Laboratory of Composite and Functional Materials, Tianjin University, Tianjin, 300350, China
| |
Collapse
|
4
|
Meireles AB, Corrêa DK, da Silveira JVW, Millás ALG, Bittencourt E, de Brito-Melo GEA, González-Torres LA. Trends in polymeric electrospun fibers and their use as oral biomaterials. Exp Biol Med (Maywood) 2018; 243:665-676. [PMID: 29763386 PMCID: PMC6378505 DOI: 10.1177/1535370218770404] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022] Open
Abstract
Electrospinning is one of the techniques to produce structured polymeric fibers in the micro or nano scale and to generate novel materials for biomedical proposes. Electrospinning versatility provides fibers that could support different surgical and rehabilitation treatments. However, its diversity in equipment assembly, polymeric materials, and functional molecules to be incorporated in fibers result in profusion of recent biomaterials that are not fully explored, even though the recognized relevance of the technique. The present article describes the main electrospun polymeric materials used in oral applications, and the main aspects and parameters of the technique. Natural and synthetic polymers, blends, and composites were identified from the available literature and recent developments. Main applications of electrospun fibers were focused on drug delivery systems, tissue regeneration, and material reinforcement or modification, although studies require further investigation in order to enable direct use in human. Current and potential usages as biomaterials for oral applications must motivate the development in the use of electrospinning as an efficient method to produce highly innovative biomaterials, over the next few years. Impact statement Nanotechnology is a challenge for many researchers that look for obtaining different materials behaviors by modifying characteristics at a very low scale. Thus, the production of nanostructured materials represents a very important field in bioengineering, in which the electrospinning technique appears as a suitable alternative. This review discusses and provides further explanation on this versatile technique to produce novel polymeric biomaterials for oral applications. The use of electrospun fibers is incipient in oral areas, mainly because of the unfamiliarity with the technique. Provided disclosure, possibilities and state of the art are aimed at supporting interested researchers to better choose proper materials, understand, and design new experiments. This work seeks to encourage many other researchers-Dentists, Biologists, Engineers, Pharmacists-to develop innovative materials from different polymers. We highlight synthetic and natural polymers as trends in treatments to motivate an advance in the worldwide discussion and exploration of this interdisciplinary field.
Collapse
Affiliation(s)
- Agnes B Meireles
- Pharmacy Department, Laboratory of Immunology, UFVJM and PPGCF-UFVJM, Diamantina, MG 39100-000, Brazil
| | - Daniella K Corrêa
- Institute of Science and Technology – UFVJM, Diamantina, MG 39100-000, Brazil
| | - João VW da Silveira
- Institute of Science and Technology – UFVJM, Diamantina, MG 39100-000, Brazil
| | - Ana LG Millás
- Chemical Engineering Department, UNICAMP, Campinas, SP 13083-852, Brazil
| | - Edison Bittencourt
- Chemical Engineering Department, UNICAMP, Campinas, SP 13083-852, Brazil
| | - Gustavo EA de Brito-Melo
- Pharmacy Department, Laboratory of Immunology, UFVJM and PPGCF-UFVJM, Diamantina, MG 39100-000, Brazil
| | | |
Collapse
|
5
|
Bhaskar B, Owen R, Bahmaee H, Wally Z, Sreenivasa Rao P, Reilly GC. Composite porous scaffold of PEG/PLA support improved bone matrix deposition in vitro
compared to PLA-only scaffolds. J Biomed Mater Res A 2018; 106:1334-1340. [DOI: 10.1002/jbm.a.36336] [Citation(s) in RCA: 30] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/09/2017] [Revised: 12/12/2017] [Accepted: 01/05/2018] [Indexed: 11/07/2022]
Affiliation(s)
- Birru Bhaskar
- Department of Biotechnology; National Institute of Technology Warangal; Telangana 506004 India
- Department of Materials Science and Engineering; University of Sheffield, INSIGNEO Institute for in silico medicine, The Pam Liversidge Building, Sir Frederick Mappin Building, Mappin Street; Sheffield S1 3JD United Kingdom
| | - Robert Owen
- Department of Materials Science and Engineering; University of Sheffield, INSIGNEO Institute for in silico medicine, The Pam Liversidge Building, Sir Frederick Mappin Building, Mappin Street; Sheffield S1 3JD United Kingdom
| | - Hossein Bahmaee
- Department of Materials Science and Engineering; University of Sheffield, INSIGNEO Institute for in silico medicine, The Pam Liversidge Building, Sir Frederick Mappin Building, Mappin Street; Sheffield S1 3JD United Kingdom
- Department of Materials Science and Engineering; University of Sheffield, The Kroto Research Institute, North Campus, Broad Lane; Sheffield S3 7HQ United Kingdom
| | - Zena Wally
- Department of Materials Science and Engineering; University of Sheffield, INSIGNEO Institute for in silico medicine, The Pam Liversidge Building, Sir Frederick Mappin Building, Mappin Street; Sheffield S1 3JD United Kingdom
| | - Parcha Sreenivasa Rao
- Department of Biotechnology; National Institute of Technology Warangal; Telangana 506004 India
| | - Gwendolen C. Reilly
- Department of Materials Science and Engineering; University of Sheffield, INSIGNEO Institute for in silico medicine, The Pam Liversidge Building, Sir Frederick Mappin Building, Mappin Street; Sheffield S1 3JD United Kingdom
| |
Collapse
|