Phantom with pulsatile arteries to investigate the influence of blood vessel depth on pulse oximeter signal strength

Mechanical Testing of Artificial Vessels and Tissues for Photoplethysmography Phantoms

Various studies have looked at the efficiency of artificial vessel and tissue networks in the study of photoplethysmography (PPG) in an effort to better understand the origin of various morphological features present in the signal. Whilst there are all reasonable attempts made to replicate geometrical features such as vessel depth, vessel wall thickness and diameter etc., not many studies have attempted to replicate the mechanical properties such as vessel elasticity and tissue compressibility. This study reports two methods for tissue mechanical testing for the analysis of vessel elasticity and tissue compressibility. A two-part polydimethylsiloxane (PDMS) was used as a base material for both tissue and vessel construction, and the properties altered by changing the curing component ratio. Tissue compression properties were investigated using an industrially calibrated materials testing device using the protocol from the ASTM 0575-91 testing method. Vessel elasticity was investigated using a custom method and apparatus to report vessel diameter and length change simultaneously. Tissue compressive properties proved reasonably easy to replicate through catalyst alteration, however the vessel elasticity properties were found to be higher than expected at all reasonable catalyst ratios. The property of hyper-elasticity was observed in the artificial vessels though, leading to the conclusion that alternative material recipes or construction methods may be needed to correctly replicate the expected mechanical characteristics. Clinical Relevance- The latest generation of health monitoring devices, especially those that are wearable and used widely by individuals wishing to monitor their health daily are becoming smarter and more sophisticated in their functionality. The majority of such devices use photoplethysmography (PPG) as their primary monitoring technique. Being able to replicate the PPG in a phantom allows the continued study and development of devices, and to improve their functionality without the continued need for extensive user-testing.

Novel Polydimethylsiloxane (PDMS) Pulsatile Vascular Tissue Phantoms for the In-Vitro Investigation of Light Tissue Interaction in Photoplethysmography

Currently there exists little knowledge or work in phantoms for the in-vitro evaluation of photoplethysmography (PPG), and its' relationship with vascular mechanics. Such phantoms are needed to provide robust, basic scientific knowledge, which will underpin the current efforts in developing new PPG technologies for measuring or estimating blood pressure, blood flow and arterial stiffness, to name but a few. This work describes the design, fabrication and evaluation of finger tissue-simulating pulsatile phantoms with integrated custom vessels. A novel technique has been developed to produce custom polydimethylsiloxane (PDMS) vessels by a continuous dip-coating process. This process can accommodate the production of different sized vessel diameters (1400-2500 µm) and wall thicknesses (56-80 µm). These vessels were embedded into a mould with a solution of PDMS and India ink surrounding them. A pulsatile pump experimental rig was set up to test the phantoms, where flow rate (1-12 L·min-1), heart rate (40-120 bpm), and total resistance (0-100% resistance clamps) could be controlled on demand. The resulting flow profiles approximates human blood flow, and the detected contact PPG signal (red and infrared) from the phantom closely resembles the morphology of in-vivo PPG waveforms with signal-to-noise ratios of 38.16 and 40.59 dB, for the red and infrared wavelengths, respectively. The progress made by this phantom development will help in obtaining new knowledge in the behaviour of PPG's under differing flow conditions, optical tissue properties and differing vessel stiffness.

A Pulsatile Optical Tissue Phantom for the Investigation of Light-Tissue Interaction in Reflectance Photoplethysmography

The aim of this study was to investigate the effect of emitter-detector separation distance and arterial depth in reflectance photoplethysmography (PPG), utilizing a homogenous pulsatile phantom that exhibits the broad optical absorbance and scattering properties of human tissue. The developed phantom comprised of embedded silicone arteries (outer diameter = 4 mm) that were arranged parallel to one another at nine increasing depths (3.2 mm to 24.4 mm). A pulsatile pump (Harvard Apparatus, MA, USA) circulated a blood imitating fluid through the vessels at the desired heart rate (60 bpm) and stroke volume (5 Lmin^-1). The PPG sensor's emitter and detector were isolated on a translation bridge to provide a computer-controlled separation distance between them. Recordings were taken at each vessel depth for emitter-detector separation distances from 2 mm to 8 mm in 0.1 mm steps. The optimum separation distance between the emitter and detector for vessels between depths of 3.2 mm and 10.5 mm was between 3.7 and 4.3 mm, suggesting that the maximum penetration of IR (930 nm) light in a homogenous pulsatile phantom is no greater than 10.5 mm.

Optode Design Space Exploration for Clinically-robust Non-invasive Fetal Oximetry

Non-invasive transabdominal fetal oximetry (TFO) has the potential to improve delivery outcomes by providing physicians with an objective metric of fetal well-being during labor. Fundamentally, the technology is based on sending light through the maternal abdomen to investigate deep fetal tissue, followed by detection and processing of the light that returns (via scattering) to the outside of the maternal abdomen. The placement of the photodetector in relation to the light source critically impacts TFO system performance, including its operational robustness in the face of fetal depth variation. However, anatomical differences between pregnant women cause the fetal depths to vary drastically, which further complicates the optical probe (optode) design optimization. In this paper, we present a methodology to solve this problem. We frame optode design space exploration as a multi-objective optimization problem, where hardware complexity (cost) and performance across a wider patient population (robustness) form competing objectives. We propose a model-based approach to characterize the Pareto-optimal points in the optode design space, through which a specific design is selected. Experimental evaluation via simulation and in vivo measurement on pregnant sheep support the efficacy of our approach.

Improved FPGA controlled artificial vascular system for plethysmographic measurements

The fetal oxygen saturation is an important parameter to determine the health status of a fetus, which is until now mostly acquired invasively. The transabdominal, fetal pulse oximetry is a promising approach to measure this non-invasively and continuously. The fetal pulse curve has to be extracted from the mixed signal of mother and fetus to determine its oxygen saturation. For this purpose efficient algorithms are necessary, which have to be evaluated under constant and reproducable test conditions. This paper presents the improved version of a phantom which can generate artificial pulse waves in a synthetic tissue phantom. The tissue phantom consists of several layers that mimic the different optical properties of the fetal and maternal tissue layers. Additionally an artificial vascular system and a dome, which mimics the bending of the belly of a pregnant woman, are incorporated. To obtain data on the pulse waves, several measurement methods are included, to help understand the behavior of the signals gained from the pulse waves. Besides pressure sensors and a transmissive method we integrated a capacitive approach, that makes use of the so called “Pin Oscillator” method. Apart from the enhancements in the tissue phantom and the measurements, we also improved the used blood substitute, which reproduces the different absorption characteristics of fetal and maternal blood. The results show that the phantom can generate pulse waves similar to the natural ones. Furthermore, the phantom represents a reference that can be used to evaluate the algorithms for transabdominal, fetal pulse oximetry.

A phantom with pulsating artificial vessels for non-invasive fetal pulse oximetry

Arterial oxygen saturation of the fetus is an important parameter for monitoring its physical condition. During labor and delivery the transabdominal non-invasive fetal pulse oximetry could minimize the risk for mother and fetus, compared to other existing invasive examination methods. In this contribution, we developed a physical-like phantom to investigate new sensor circuits and algorithms of a non-invasive diagnostic method for fetal pulse oximetry. Hence, the developed artificial vascular system consists of two independent tube systems representing the maternal and fetal vessel system. The arterial blood pressure is reproduced with a pre-pressure and an artificial vascular system. Each pulse wave can be reproduced, by digital control of a proportional valve, adjustable viscoelastic elements, and resistances. The measurements are performed by pressure transducers, optical sensor units, and a coplanar capacitive sensor. Transmission and reflection measurements have shown that the fetal and maternal pulse waves can be reproduced qualitatively. The measured light represents the transabdominal modulated signal on an abdomen of a pregnant woman.

Reflective oxygen saturation monitoring at hypothenar and its validation by human hypoxia experiment

BACKGROUND

Pulse oxygen saturation (SpO2) is an important parameter for healthcare, and wearable sensors and systems for SpO2 monitoring have become increasingly popular. The aim of this paper is to develop a novel SpO2 monitoring system, which detects photoplethysmographic (PPG) signals at hypothenar with a reflection-mode sensor embedded into a glove.

METHODS

A special photo-detector section was designed with two photodiodes arranged symmetrically to the red and infrared light-emitting diodes (LED) to enhance the signal quality. The reflective sensor was placed in a soft silicon substrate sewn in a glove to fit the surface of the hypothenar. To lower the power consumption, the LED driving current was reduced and energy-efficient electronic components were applied. The performance for PPG signal detection and SpO2 monitoring was evaluated by human hypoxia experiments. Accelerometer-based adaptive noise cancellation (ANC) methods applying the least mean squares (LMS) and recursive least squares (RLS) algorithms were studied to suppress motion artifact.

RESULTS

A total of 20 subjects participated in the hypoxia experiment. The degree of comfort for wearing this system was accepted by them. The PPG signals were detected effectively at SpO2 levels from about 100-70%. The experiment validated the accuracy of the system was 2.34%, compared to the invasive measurements. Both the LMS and RLS algorithms improved the performance during motion. The total current consumed by the system was only 8 mA.

CONCLUSIONS

It is feasible to detect PPG signal and monitor SpO2 at the location of hypothenar. This novel system can achieve reliable SpO2 measurements at different SpO2 levels and on different individuals. The system is light-weighted, easy to wear and power-saving. It has the potential to be a solution for wearable monitoring, although more work should be conducted to improve the motion-resistant performance significantly.

Towards a bimodal proximity sensor for in situ neurovascular bundle detection during dental implant surgery

Proof of concept results are presented towards an in situ bimodal proximity sensor for neurovascular bundle detection during dental implant surgery using combined near infrared absorption (NIR) and optical coherence tomography (OCT) techniques. These modalities are shown to have different sensitivity to the proximity of optical contrast from neurovascular bundles. NIR AC and DC signals from the pulsing of an artery enable qualitative ranging of the bundle in the millimeter range, with best sensitivity around 0.5-3mm distance in a custom phantom setup. OCT provides structural mapping of the neurovascular bundle at sub-millimeter distances in an ex vivo human jaw bone. Combining the two techniques suggests a novel ranging system for the surgeon that could be implemented in a "smart drill." The proximity to the neurovascular bundle can be tracked in real time in the range of a few millimeters with NIR signals, after which higher resolution imaging OCT to provide finer ranging in the sub-millimeter distances.