Bienzymatic biosensor for rapid detection of aspartame by flow injection analysis

Amperometric bienzymatic biosensor in flow injection analysis system for determination of aspartame in foods

An amperometric bienzymatic biosensor was developed for the determination of aspartame in a flow injection analysis (FIA) system, consisting of two enzyme reactor columns packed with immobilized α-chymotrypsin (CHY) and alcohol oxidase (AOX) beads and a hydrogen peroxide electrode, connected in series. The CHY and AOX were separately immobilized on glutaraldehyde (GA)-activated beads through covalent bonding. The biosensor fabrication and operational conditions were optimized. The optimal fabrication conditions were: 2% GA with 120 min activation time; and 250 U/mL CHY and 100 U/mL AOX, with 180 min enzyme immobilization time. The optimal operational conditions were a flow rate of 0.5 mL/min and pH 8.0 at room temperature. The developed biosensor showed linearity over the aspartame concentration range 0.01-1.2 mM, with a detection limit of 0.005 mM. The developed biosensor was satisfactorily applied for detecting aspartame in beverage samples without any excessive pretreatments.

Analytical Methods for Determination of Non-Nutritive Sweeteners in Foodstuffs

Sweeteners have been used in food for centuries to increase both taste and appearance. However, the consumption of sweeteners, mainly sugars, has an adverse effect on human health when consumed in excessive doses for a certain period, including alteration in gut microbiota, obesity, and diabetes. Therefore, the application of non-nutritive sweeteners in foodstuffs has risen dramatically in the last decade to substitute sugars. These sweeteners are commonly recognized as high-intensity sweeteners because, in a lower amount, they could achieve the same sweetness of sugar. Regulatory authorities and supervisory agencies around the globe have established the maximum amount of these high-intensity sweeteners used in food products. While the regulation is getting tighter on the market to ensure food safety, reliable analytical methods are required to assist the surveillance in monitoring the use of high-intensity sweeteners. Hence, it is also necessary to comprehend the most appropriate method for rapid and effective analyses applied for quality control in food industries, surveillance and monitoring on the market, etc. Apart from various analytical methods discussed here, extraction techniques, as an essential step of sample preparation, are also highlighted. The proper procedure, efficiency, and the use of solvents are discussed in this review to assist in selecting a suitable extraction method for a food matrix. Single- and multianalyte analyses of sweeteners are also described, employing various regular techniques, such as HPLC, and advanced techniques. Furthermore, to support on-site surveillance of sweeteners’ usage in food products on the market, non-destructive analytical methods that provide practical, fast, and relatively low-cost analysis are widely implemented.

Diroximel fumarate in the treatment of multiple sclerosis

Diroximel fumarate (DRF) is a new emerging therapy for patients with multiple sclerosis. The levels of its active metabolite, monomethyl fumarate, are bioequivalent to the levels generated from dimethyl fumarate (DMF) treatment. The efficacy and safety profiles of DRF are expected to be similar to the well-established profiles of DMF. The metabolism of DRF leads to lower concentration of methanol in the small intestine than with DMF and thus reduced severity and frequency of gastrointestinal adverse events. DRF seems a promising alternative to DMF and other first-line therapies for multiple sclerosis. The current review is based on the two existing Phase III trials of DRF: the interim analysis of the EVOLVE-MS-1 trial and the completed EVOLVE-MS-2 trial.

Organic-Inorganic Nanohybrid Electrochemical Sensors from Multi-Walled Carbon Nanotubes Decorated with Zinc Oxide Nanoparticles and In-Situ Wrapped with Poly(2-methacryloyloxyethyl ferrocenecarboxylate) for Detection of the Content of Food Additives

An electrochemical sensor for detection of the content of aspartame was developed by modifying a glassy carbon electrode (GCE) with multi-walled carbon nanotubes decorated with zinc oxide nanoparticles and in-situ wrapped with poly(2-methacryloyloxyethyl ferrocenecarboxylate) (MWCNTs@ZnO/PMAEFc). MWCNTs@ZnO/PMAEFc nanohybrids were prepared through reaction of zinc acetate dihydrate with LiOH·H2O, followed by reversible addition-fragmentation chain transfer polymerization of 2-methacryloyloxyethyl ferrocenecarboxylate, and were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), Raman, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), scanning electron microscope (SEM), and transmission electron microscope (TEM) techniques. The electrochemical properties of the prepared nanohybrids with various composition ratios were examined by cyclic voltammetry (CV), and the trace additives in food and/or beverage was detected by using differential pulse voltammetry (DPV). The experimental results indicated that the prepared nanohybrids for fabrication of electrochemical modified electrodes possess active electroresponse, marked redox current, and good electrochemical reversibility, which could be mediated by changing the system formulations. The nanohybrid modified electrode sensors had a good peak current linear dependence on the analyte concentration with a wide detection range and a limit of detection as low as about 1.35 × 10-9 mol L-1, and the amount of aspartame was measured to be 35.36 and 40.20 µM in Coke zero, and Sprite zero, respectively. Therefore, the developed nanohybrids can potentially be used to fabricate novel electrochemical sensors for applications in the detection of beverage and food safety.

Ester flavorants detection in foods with a bienzymatic biosensor based on a stable Prussian blue-copper electrodeposited on carbon paper electrode

A stable and reproducible layer of Prussian blue (PB) modified with copper was electrodeposited on carbon paper electrodes for the multiple detection of ester flavorants with a bienzymatic biosensor. Carbon fiber composite paper was investigated as high-surface, low-cost substrate for biosensor development. The pre-activation of the electrode surface by cyclic voltammetry was necessary to improve the electrochemical properties before the electrochemical deposition of Prussian blue-copper film (PB-Cu). The stability and the reproducibility of the obtained PB-Cu carbon paper electrode was demonstrated at pH 7.4, optimum for biosensor development. The developed biosensor is based on the immobilization of two enzymes (carboxyl esterase and alcohol oxidase) by cross-linking with glutaraldehyde onto PB-Cu carbon paper electrode. A mixture of key aroma ester compounds (methyl butyrate, ethyl butyrate, methyl cinnamate and ethyl cinnamate) was detected in several food samples with low interferences.