Intensity Variation Normalization for Finger Vein Recognition Using Guided Filter Based Singe Scale Retinex

Digital image processing realized by memristor-based technologies

Today performance and operational efficiency of computer systems on digital image processing are exacerbated owing to the increased complexity of image processing. It is also difficult for image processors based on complementary metal-oxide-semiconductor (CMOS) transistors to continuously increase the integration density, causing by their underlying physical restriction and economic costs. However, such obstacles can be eliminated by non-volatile resistive memory technologies (known as memristors), arising from their compacted area, speed, power consumption high efficiency, and in-memory computing capability. This review begins with presenting the image processing methods based on pure algorithm and conventional CMOS-based digital image processing strategies. Subsequently, current issues faced by digital image processing and the strategies adopted for overcoming these issues, are discussed. The state-of-the-art memristor technologies and their challenges in digital image processing applications are also introduced, such as memristor-based image compression, memristor-based edge and line detections, and voice and image recognition using memristors. This review finally envisages the prospects for successful implementation of memristor devices in digital image processing.

Enhancement of quasi-static compression strength for aluminum closed cell foam blocks shielded by aluminum tubes

Aluminum closed cell foam blocks are created with a volume of 1 inch³ which consist of aluminum foam parts shielded with part of aluminum tube and in some types reinforced with inner aluminum tubes. Blocks have been made to overcome some existing problems in metallic foam used to protect some applications parts from impacts as a sacrificial part. Metallic foam has three main categories sandwich panels, filled tubes and corrugated sheets. Quasi-static compression tests have been applied on 12 blocks with different shapes and compared with pure aluminum foam blocks as a reference. Results display the enhancement of mechanical properties of blocks like yield strength (S_Y), crushing strength (S_c) and densification strength (S_d), compression at strain 70%, as well as absorbed energy (area of compression under the curve). The highest value for yield strength (5.87 MPa) was registered for Finger phalanxes cube block (FP-0.1 Sq.). While the highest value for densification strength (21.7 MPa) was registered for spine cylinder block (SV8-0.17 C25). The registered results for samples apparent the highest value for energy dissipation density (E_dd) is 40.52 J/in³ (91% enhancement) and crushing strength (8.61 MPa) was registered for Finger phalanx cylinder block (FP-0.17 C25). The lowest value for E_dd is 14.16 J/in³ (less than pure aluminum foam block value by 33%), S_Y = 0.42 MPa, Sc = 3.21 MPa, and S_d = 4.46 MPa, registered for thin wall Ear canal cylinder block (EC8-0.075 C26.5). Best mechanical properties had been achieved for Finger phalanx cylinder block (FP-0.17 C25) and spine cylinder block (SV8-0.17 C25).

Dorsal Hand Vein Image Enhancement Using Fusion of CLAHE and Fuzzy Adaptive Gamma

Enhancement of captured hand vein images is essential for a number of purposes, such as accurate biometric identification and ease of medical intravenous access. This paper presents an improved hand vein image enhancement technique based on weighted average fusion of contrast limited adaptive histogram equalization (CLAHE) and fuzzy adaptive gamma (FAG). The proposed technique is applied using three stages. Firstly, grey level intensities with CLAHE are locally applied to image pixels for contrast enhancement. Secondly, the grey level intensities are then globally transformed into membership planes and modified with FAG operator for the same purposes. Finally, the resultant images from CLAHE and FAG are fused using improved weighted averaging methods for clearer vein patterns. Then, matched filter with first-order derivative Gaussian (MF-FODG) is employed to segment vein patterns. The proposed technique was tested on self-acquired dorsal hand vein images as well as images from the SUAS databases. The performance of the proposed technique is compared with various other image enhancement techniques based on mean square error (MSE), peak signal-to-noise ratio (PSNR), and structural similarity index measurement (SSIM). The proposed enhancement technique’s impact on the segmentation process has also been evaluated using sensitivity, accuracy, and dice coefficient. The experimental results show that the proposed enhancement technique can significantly enhance the hand vein patterns and improve the detection of dorsal hand veins.

Fast Finger Vein Recognition Based on Sparse Matching Algorithm under a Multicore Platform for Real-Time Individuals Identification

Nowadays, individual identification is a problem in many private companies, but also in governmental and public order entities. Currently, there are multiple biometric methods, each with different advantages. Finger vein recognition is a modern biometric technique, which has several advantages, especially in terms of security and accuracy. However, image deformations and time efficiency are two of the major limitations of state-of-the-art contributions. In spite of affine transformations produced during the acquisition process, the geometric structure of finger vein images remains invariant. This consideration of the symmetry phenomena presented in finger vein images is exploited in the present work. We combine an image enhancement procedure, the DAISY descriptor, and an optimized Coarse-to-fine PatchMatch (CPM) algorithm under a multicore parallel platform, to develop a fast finger vein recognition method for real-time individuals identification. Our proposal provides an effective and efficient technique to obtain the displacement between finger vein images and considering it as discriminatory information. Experimental results on two well-known databases, PolyU and SDUMLA, show that our proposed approach achieves results comparable to deformation-based techniques of the state-of-the-art, finding statistical differences respect to non-deformation-based approaches. Moreover, our method highly outperforms the baseline method in time efficiency.

Adaptive Image Rendering Using a Nonlinear Mapping-Function-Based Retinex Model

This paper introduces an adaptive image rendering using a parametric nonlinear mapping-function-based on the retinex model in a low-light source. For this study, only a luminance channel was used to estimate the reflectance component of an observed low-light image, therefore halo artifacts coming from the use of the multiple center/surround Gaussian filters were reduced. A new nonlinear mapping function that incorporates the statistics of the luminance and the estimated reflectance in the reconstruction process is proposed. In addition, a new method to determine the gain and offset of the mapping function is addressed to adaptively control the contrast ratio. Finally, the relationship between the estimated luminance and the reconstructed luminance is used to reconstruct the chrominance channels. The experimental results demonstrate that the proposed method leads to the promised subjective and objective improvements over state-of-the-art, scale-based retinex methods.

SAR Image Denoising Algorithm Based on Bayes Wavelet Shrinkage and Fast Guided Filter

To remove the speckle noise of synthetic aperture radar (SAR) images, a novel denoising algorithm based on Bayes wavelet shrinkage and a fast guided filter is proposed. According to the statistical properties of SAR images, the noise-free signal and speckle noise in the wavelet domain are modeled as Laplace and Fisher-Tippett distributions respectively. Then a new wavelet shrinkage algorithm is obtained by adopting the Bayes maximum a posteriori estimation. Speckle noise in the high-frequency domain of SAR images is shrunk by this new wavelet shrinkage algorithm. As the wavelet coefficients of the low-frequency domain also contain some speckle noise, speckle noise in the low-frequency domain can be further filtered by the fast guided filter. The result of the denoising experiments of simulated SAR images and real SAR images demonstrate that the proposed algorithm has the ability to better denoise and preserve edge information.

Image Enhancement for Inspection of Cable Images Based on Retinex Theory and Fuzzy Enhancement Method in Wavelet Domain

Inspection images of power transmission line provide vision interaction for the operator and the environmental perception for the cable inspection robot (CIR). However, inspection images are always contaminated by severe outdoor working conditions such as uneven illumination, low contrast, and speckle noise. Therefore, this paper proposes a novel method based on Retinex and fuzzy enhancement to improve the image quality of the inspection images. A modified multi-scale Retinex (MSR) is proposed to compensate the uneven illumination by processing the low frequency components after wavelet decomposition. Besides, a fuzzy enhancement method is proposed to perfect the edge information and improve contrast by processing the high frequency components. A noise reduction procedure based on soft threshold is used to avoid the noise amplification. Experiments on the self-built standard test dataset show that the algorithm can improve the image quality by 3–4 times. Compared with several other methods, the experimental results demonstrate that the proposed method can obtain better enhancement performance with more homogeneous illumination and higher contrast. Further research will focus on improving the real-time performance and parameter adaptation of the algorithm.

A Systematic Review of Finger Vein Recognition Techniques

Biometric identification is the study of physiological and behavioral attributes of an individual to overcome security problems. Finger vein recognition is a biometric technique used to analyze finger vein patterns of persons for proper authentication. This paper presents a detailed review on finger vein recognition algorithms. Such tools include image acquisition, preprocessing, feature extraction and matching methods to extract and analyze object patterns. In addition, we list some novel findings after the critical comparative analysis of the highlighted techniques. The comparative studies indicate that the accuracy of finger vein identification methods is up to the mark.

Enhancement of Low Contrast Images Based on Effective Space Combined with Pixel Learning

Images captured in bad conditions often suffer from low contrast. In this paper, we proposed a simple, but efficient linear restoration model to enhance the low contrast images. The model’s design is based on the effective space of the 3D surface graph of the image. Effective space is defined as the minimum space containing the 3D surface graph of the image, and the proportion of the pixel value in the effective space is considered to reflect the details of images. The bright channel prior and the dark channel prior are used to estimate the effective space, however, they may cause block artifacts. We designed the pixel learning to solve this problem. Pixel learning takes the input image as the training example and the low frequency component of input as the label to learn (pixel by pixel) based on the look-up table model. The proposed method is very fast and can restore a high-quality image with fine details. The experimental results on a variety of images captured in bad conditions, such as nonuniform light, night, hazy and underwater, demonstrate the effectiveness and efficiency of the proposed method.

Spoof Detection for Finger-Vein Recognition System Using NIR Camera

Finger-vein recognition, a new and advanced biometrics recognition method, is attracting the attention of researchers because of its advantages such as high recognition performance and lesser likelihood of theft and inaccuracies occurring on account of skin condition defects. However, as reported by previous researchers, it is possible to attack a finger-vein recognition system by using presentation attack (fake) finger-vein images. As a result, spoof detection, named as presentation attack detection (PAD), is necessary in such recognition systems. Previous attempts to establish PAD methods primarily focused on designing feature extractors by hand (handcrafted feature extractor) based on the observations of the researchers about the difference between real (live) and presentation attack finger-vein images. Therefore, the detection performance was limited. Recently, the deep learning framework has been successfully applied in computer vision and delivered superior results compared to traditional handcrafted methods on various computer vision applications such as image-based face recognition, gender recognition and image classification. In this paper, we propose a PAD method for near-infrared (NIR) camera-based finger-vein recognition system using convolutional neural network (CNN) to enhance the detection ability of previous handcrafted methods. Using the CNN method, we can derive a more suitable feature extractor for PAD than the other handcrafted methods using a training procedure. We further process the extracted image features to enhance the presentation attack finger-vein image detection ability of the CNN method using principal component analysis method (PCA) for dimensionality reduction of feature space and support vector machine (SVM) for classification. Through extensive experimental results, we confirm that our proposed method is adequate for presentation attack finger-vein image detection and it can deliver superior detection results compared to CNN-based methods and other previous handcrafted methods.

SIFT Based Vein Recognition Models: Analysis and Improvement

Scale-Invariant Feature Transform (SIFT) is being investigated more and more to realize a less-constrained hand vein recognition system. Contrast enhancement (CE), compensating for deficient dynamic range aspects, is a must for SIFT based framework to improve the performance. However, evidence of negative influence on SIFT matching brought by CE is analysed by our experiments. We bring evidence that the number of extracted keypoints resulting by gradient based detectors increases greatly with different CE methods, while on the other hand the matching result of extracted invariant descriptors is negatively influenced in terms of Precision-Recall (PR) and Equal Error Rate (EER). Rigorous experiments with state-of-the-art and other CE adopted in published SIFT based hand vein recognition system demonstrate the influence. What is more, an improved SIFT model by importing the kernel of RootSIFT and Mirror Match Strategy into a unified framework is proposed to make use of the positive keypoints change and make up for the negative influence brought by CE.

Realistic Image Rendition Using a Variable Exponent Functional Model for Retinex

The goal of realistic image rendition is to recover the acquired image under imperfect illuminant conditions, where non-uniform illumination may degrade image quality with high contrast and low SNR. In this paper, the assumption regarding illumination is modified and a variable exponent functional model for Retinex is proposed to remove non-uniform illumination and reduce halo artifacts. The theoretical derivation is provided and experimental results are presented to illustrate the effectiveness of the proposed model.