Investigation of Sensitivities and Drift Effects of the Arrayed Flexible Chloride Sensor Based on RuO₂/GO at Different Temperatures

Integrated Headband for Monitoring Chloride Anions in Sweat Using Developed Flexible Patches

Flexible wearable potentiometric ion sensors for continuous monitoring of electrolyte cations have made significant advances in bioanalysis for personal healthcare and diagnostics. However, less attention is paid to the most abundant extracellular anion, chloride ion (Cl-) as a mark of electrolyte imbalance and an important diagnostic indicator of cystic fibrosis, which has important significance for accurate monitoring in complex biological fluids. An all-solid-state Cl--selective electrode is constructed utilizing oxygen vacancies reinforced vanadium oxide with a nitrogen-doped carbon shield as the solid contact (V2O3-x@NC/Cl--ISE). The prepared V2O3-x@NC/Cl--ISE exhibits a low detection limit of 10-5.45 M without an interfacial water layer and shows a highly stable potential with 7.24 μV/h during 24 h, which is attributed to the rapid interfacial electron transfer of the conductive carbon layers and the valence state transition of the polyvalent vanadium center in charge storage processes. Additionally, the custom flexible sensing patch presents an excellent sensitivity retention rate under bending (95%) and twisting (93%) strains and possesses good anti-interference performance (ΔE < 8 mV) against common interfering ions and organic substances in sweat. Real-time monitoring of the Cl- concentration in sweat aligns with ion chromatography analysis results. This study presents a compact wearable Cl- monitoring platform for the easy tracking of exercise-induced dehydration and cystic fibrosis screening with promising applications in smart healthcare.

Integrated pH Sensors Based on RuO2/GO Nanocomposites Fabricated Using the Aerosol Jet Printing Method

An aerosol jet printing (AJP) process for depositing ruthenium dioxide (RuO2) as a promising material for pH sensing is reported. Graphene oxide (GO) with a large surface area was used for the in situ sol-gel deposition of RuO2 nanoparticles on its surface. The cosolvent ratio and solid loading of the solution are adjusted to form a printable and stable ink. The monodispersed aerosol was atomized on the surface of the screen-printed carbon electrode in order to develop an integrated pH sensor. The RuO2-GO pH sensor demonstrates excellent performance, with a rapid response time of less than 5 s and high sensitivity in the pH range of 4-10. Compared to traditional carbon electrodes, the RuO2-GO sensor shows up to four times higher sensitivity. The increased sensitivity is a result of the consistent attachment of small-crystallized RuO2 nanoparticles onto the surface of GO sheets, leading to a synergistic effect. Thanks to the AJP method as a facile and cost-effective integration technique, the fabricated electrodes can serve as an alternative to traditional rigid pH electrodes for accurate pH measurement.

Evaluation of the health risks linked to two swimming pools regularly frequented from the city of Yaounde in Cameroon (Central Africa)

The study highlights the presence of pathogenic strains of microorganisms in two swimming pools, highly frequented in the city of Yaounde. Thus, the water samples from these swimming pools have undergone physicochemical and biological treatments using conventional techniques. Three groups of microorganisms (Bacteria, Protozoa, and Helminths) were identified and quantified in these swimming pools with weakly acidic waters (6.79 ± 0.35) with an average temperature of 26.63 ± 0.53 °C and suspended matter ranging from 2 to 150 mg.l^-1. The total bacterial load varies between 8 × 10³ and 6000 × 10³ CFU/100 ml. It consists of mesophilic aerobic heterotrophic bacteria, fecal coliforms, total coliforms, fecal streptococci, Staphylococcus aureus, and Pseudomonas aeruginosa. Protozoan cysts and oocysts range from 122 to 505 per liter of water. These values are slightly lower for helminth eggs and larvae (0 to 108 eggs and larvae/l). In both swimming pools, significant correlations were observed between some abiotic and biotic parameters. The waters of the studied swimming pools are subject to fecal pollution. Swimmers would therefore be exposed to biological contaminations, responsible for pathologies. The most common diseases are linked to gastroenteritis (diarrhea), but infections of all kinds may be overgrown (conjunctivitis, ear infections, dermatitis, respiratory infections).

Micro-fabricated electrochemical chloride ion sensors: From the present to the future

The real-time detection and monitoring of chloride ion concentrations play important roles in broad industrial applications, including wearable health care device, environmental pollutant control and infrastructure corrosion monitoring. The development of all-solid-state micro-fabricated electrochemical sensors has enabled the miniaturisation of these testing devices. This study reviewed the micro-fabricated electrochemical chloride sensors developed since 1970s, together with a brief summary regarding the progression of miniaturised electrochemical sensors in the past half century. Three major types of electrochemical chloride sensors with specific ion-selectivity have been discussed, the potentiometric sensors (including both ion-selective electrodes and chemical FETs), the chronopotentiometric sensors and the voltammetric sensors. In addition, colorimetric sensors, an emerging low-cost, portable, fast diagnose sensor technique has been included in this review. Four critical sensor performances have been reviewed and compared systematically, the sensibility (chloride concentration range), selectivity, lifetime and applicable pH ranges. The future perspectives for engineering applications proposed in this review will benefit the further development of integrated multi-functional sensors, as well as new instrumental testing methods.

A New Calibration Circuit Design to Reduce Drift Effect of RuO2 Urea Biosensors

The goal of this study was to reduce the drift effect of RuO₂ urea biosensors. A new calibration circuit (NCC) based on the voltage regulation technique with the advantage of having a simple structure was presented. To keep its simplicity, the proposed NCC was composed of a non-inverting amplifier and a voltage calibrating circuit. A ruthenium oxide (RuO₂) urea biosensor was fabricated to test the calibrating characteristics of the drift rate of the proposed NCC. The experiment performed in this study was divided into two main stages. For the first stage, a sound RuO₂ urea biosensor testing environment was set-up. The RuO₂ urea sensing film was immersed in the urea solution for 12 h and the response voltage was measured using the voltage-time (V-T) measurement system and the proposed NCC. The results of the first stage showed that the RuO₂ urea biosensor has an average sensitivity of 1.860 mV/(mg/dL) and has a linearity of 0.999 which means that the RuO₂ urea biosensor had been well fabricated. The second stage of the experiment verified the proposed NCC's functions, and the results indicated that the proposed NCC reduced the drift rate of RuO₂ urea biosensor to 0.02 mV/hr (98.77% reduction).