Cicada Wing Inspired Template-Stripped SERS Active 3D Metallic Nanostructures for the Detection of Toxic Substances

Real-Time Plasmonic Strain Sensors Based on Surface Relief Diffraction Gratings

Large-scale diffraction gratings were fabricated in surface relief on azobenzene thin films and transferred to flexible PDMS substrates using soft lift-off lithography. The PDMS gratings were strained along the grating vector axis and the resulting surface topography was analyzed using diffraction angle measurements, AFM imagery and surface plasmon resonance (SPR) spectra. All measurement methods exhibited a linear response in strain indicating the useability of these sensors in real-world applications. For SPR-based strain sensing, an increasing pitch and a decreasing modulation depth were observed with increasing strain. The SPR peak shifted by ~1.0 nm wavelength and the SPR intensity decreased by ~0.3 a.u. per percentage of applied strain. The tested PDMS samples retained their integrity even after multiple cycles of stretching and relaxation, making them a suitable strain sensor.

Bionic Plasmonic Nanoarrays Excited by Radially Polarized Vector Beam for Metal-Enhanced Fluorescence

Metal-enhanced fluorescence (MEF) is an important fluorescence technology due to its ability to significantly improve the fluorescence intensity. Here, we present a new MEF configuration of the bionic nanorod array illuminated by radially polarized vector beam (RVB). The bionic nanorod array is fabricated via a nanoimprinting method by using the wings of the Chinese cicada "meimuna mongolica" as bio-templates, and later coating gold film by ion sputtering deposition method. The MEF performance of the prepared substrate is tested by a home-made optical system. The experiment results show that, in the case of RVB excitation, the intensity of fluorescence is more than 10 times stronger with the nano-imprinted substrate than that with glass. Using the bionic nanoarray as a substrate, the intensity of fluorescence is ~2 times stronger via RVB than that by the linearly polarized beam. In addition, the prepared substrate is verified to have good uniformity.

LSPR Tunable Ag@PDMS SERS Substrate for High Sensitivity and Uniformity Detection of Dye Molecules

At present, the use of efficient and cost-effective methods to construct plasmonic surface-enhanced Raman scattering (SERS) substrates of high sensitivity, uniformity and reproducibility is still crucial to satisfy the practical application of SERS technology. In this paper, a localized surface plasmonic resonance (LSPR) tunable flexible Ag@PDMS substrate was successfully constructed by the low-cost bio-template-stripping method and magnetron sputtering technology. The theory proves that the local electromagnetic field enhancement and "hot spot" distribution is adjustable by modifying the size of the optical cavity unit in the periodicity nanocavity array structure. Experimentally, using rhodamine 6G (R6G) as the target analyte, the SERS performance of optimal Ag@PDMS substrate (Ag film thickness for 315 nm) was researched in detail, which the minimum detection limit was 10^-11 M and the enhancement factor was calculated as 8.03 × 10⁸, indicating its high sensitivity. The relative standard deviation (RSD) was calculated as 10.38%, showing that the prepared substrate had excellent electromagnetic field enhancement uniformity. At last, the trace detection of Crystal violet (CV, LOD = 10^-9 M) and the simultaneous detection of three common dyes (R6G, CV and Methylene blue (MB) mixture) were also realized. This result suggests that the SERS substrate has a good application prospect in the quantitative and qualitative detection of dye molecules.

Biomimetic macroscopic hierarchical moire gratings

Large-scale hierarchical macroscopic moire gratings resembling the surface structure of Peruvian lily flower petals are fabricated on azobenzene molecular glass thin films using a Lloyd's mirror interferometer. It is shown that nanostructured linear and crossed moire gratings can be made with pitch values reaching a few millimeters. Also, using atomic force microscopy, scanning electron microscopy, optical microscopy, and surface profilometry techniques, it is shown that the obtained moire gratings have two-fold or three-fold hierarchical structures fabricated using a simple all optical technique.

FDTD Analysis of Hotspot-Enabling Hybrid Nanohole-Nanoparticle Structures for SERS Detection

Metallic nanoparticles (MNPs) and metallic nanostructures are both commonly used, independently, as SERS substrates due to their enhanced plasmonic activity. In this work, we introduce and investigate a hybrid nanostructure with strong SERS activity that benefits from the collective plasmonic response of the combination of MNPs and flow-through nanohole arrays (NHAs). The electric field distribution and electromagnetic enhancement factor of hybrid structures composed of silver NPs on both silver and gold NHAs are investigated via finite-difference time-domain (FDTD) analyses. This computational approach is used to find optimal spatial configurations of the nanoparticle positions relative to the nanoapertures and investigate the difference between Ag-NP-on-Ag-NHAs and Ag-NP-on-Au-NHAs hybrid structures. A maximum G_SERS value of 6.8 × 10⁹ is achieved with the all-silver structure when the NP is located 0.5 nm away from the rim of the NHA, while the maximum of 4.7 × 10¹⁰ is obtained when the nanoparticle is in full contact with the NHA for the gold-silver hybrid structure. These results demonstrate that the hybrid nanostructures enable hotspot formation with strong SERS activity and plasmonic enhancement compatible with SERS-based sensing applications.