An Automated Indoor Localization System for Online Bluetooth Signal Strength Modeling Using Visual-Inertial SLAM

Wi-Fi Fingerprint-Based Indoor Localization Method via Standard Particle Swarm Optimization

With the continuous development and improvement in Internet-of-Things (IoT) technology, indoor localization has received considerable attention. Particularly, owing to its unique advantages, the Wi-Fi fingerprint-based indoor-localization method has been widely investigated. However, achieving high-accuracy localization remains a challenge. This study proposes an application of the standard particle swarm optimization algorithm to Wi-Fi fingerprint-based indoor localization, wherein a new two-panel fingerprint homogeneity model is adopted to characterize fingerprint similarity to achieve better performance. In addition, the performance of the localization method is experimentally verified. The proposed localization method outperforms conventional algorithms, with improvements in the localization accuracy of 15.32%, 15.91%, 32.38%, and 36.64%, compared to those of KNN, SVM, LR, and RF, respectively.

Multi-Floor Indoor Localization Based on Multi-Modal Sensors

High-precision indoor localization is growing extremely quickly, especially for multi-floor scenarios. The data on existing indoor positioning schemes, mainly, come from wireless, visual, or lidar means, which are limited to a single sensor. With the massive deployment of WiFi access points and low-cost cameras, it is possible to combine the above three methods to achieve more accurate, complete, and reliable location results. However, the existing SLAM rapidly advances, so hybrid visual and wireless approaches take advantage of this, in a straightforward manner, without exploring their interactions. In this paper, a high-precision multi-floor indoor positioning method, based on vision, wireless signal characteristics, and lidar is proposed. In the joint scheme, we, first, use the positioning data output in lidar SLAM as the theoretical reference position for visual images; then, use a WiFi signal to estimate the rough area, with likelihood probability; and, finally, use the visual image to fine-tune the floor-estimation and location results. Based on the numerical results, we show that the proposed joint localization scheme can achieve 0.62 m of 3D localization accuracy, on average, and a 1.24-m MSE for two-dimensional tracking trajectories, with an estimation accuracy for the floor equal to 89.22%. Meanwhile, the localization process takes less than 0.25 s, which is of great importance for practical implementation.

Indoor Positioning System Based on Bluetooth Low Energy Technology and a Nature-Inspired Optimization Algorithm

Warehousing is one of the most important activities in the supply chain, enabling competitive advantage. Effective management of warehousing processes is, therefore, crucial for achieving minimal costs, maximum efficiency, and overall customer satisfaction. Warehouse Management Systems (WMS) are the first steps towards organizing these processes; however, due to the human factor involved, information on products, vehicles and workers may be missing, corrupt, or misleading. In this paper, a cost-effective Indoor Positioning System (IPS) based on Bluetooth Low Energy (BLE) technology is presented for use in Intralogistics that works automatically, and therefore minimizes the possibility of acquiring incorrect data. The proposed IPS solution is intended to be used for supervising order-picker movements, movement of packages between workstations, and tracking other mobile devices in a manually operated warehouse. Only data that are accurate, reliable and represent the actual state of the system, are useful for detailed material flow analysis and optimization in Intralogistics. Using the developed solution, IPS technology is leveraged to enhance the manually operated warehouse operational efficiency in Intralogistics. Due to the hardware independence, the developed software solution can be used with virtually any BLE supported beacons and receivers. The results of IPS testing in laboratory/office settings show that up to 98% of passings are detected successfully with time delays between approach and detection of less than 0.5 s.

Indoor Positioning and Navigation

Recently, the social and commercial interest in location-based services (LBS) has been increasing significantly [...].

A Lightweight Localization Strategy for LiDAR-Guided Autonomous Robots with Artificial Landmarks

This paper proposes and implements a lightweight, "real-time" localization system (SORLA) with artificial landmarks (reflectors), which only uses LiDAR data for the laser odometer compensation in the case of high-speed or sharp-turning. Theoretically, due to the feature-matching mechanism of the LiDAR, locations of multiple reflectors and the reflector layout are not limited by geometrical relation. A series of algorithms is implemented to find and track the features of the environment, such as the reflector localization method, the motion compensation technique, and the reflector matching optimization algorithm. The reflector extraction algorithm is used to identify the reflector candidates and estimates the precise center locations of the reflectors from 2D LiDAR data. The motion compensation algorithm predicts the potential velocity, location, and angle of the robot without odometer errors. Finally, the matching optimization algorithm searches the reflector combinations for the best matching score, which ensures that the correct reflector combination could be found during the high-speed movement and fast turning. All those mechanisms guarantee the algorithm's precision and robustness in the high speed and noisy background. Our experimental results show that the SORLA algorithm has an average localization error of 6.45 mm at a speed of 0.4 m/s, and 9.87 mm at 4.2 m/s, and still works well with the angular velocity of 1.4 rad/s at a sharp turn. The recovery mechanism in the algorithm could handle the failure cases of reflector occlusion, and the long-term stability test of 72 h firmly proves the algorithm's robustness. This work shows that the strategy used in the SORLA algorithm is feasible for industry-level navigation with high precision and a promising alternative solution for SLAM.

LightGBM Indoor Positioning Method Based on Merged Wi-Fi and Image Fingerprints

Smartphones are increasingly becoming an efficient platform for solving indoor positioning problems. Fingerprint-based positioning methods are popular because of the wide deployment of wireless local area networks in indoor environments and the lack of model propagation paths. However, Wi-Fi fingerprint information is singular, and its positioning accuracy is typically 2–10 m; thus, it struggles to meet the requirements of high-precision indoor positioning. Therefore, this paper proposes a positioning algorithm that combines Wi-Fi fingerprints and visual information to generate fingerprints. The algorithm involves two steps: merged-fingerprint generation and fingerprint positioning. In the merged-fingerprint generation stage, the kernel principal component analysis feature of the Wi-Fi fingerprint and the local binary pattern features of the scene image are fused. In the fingerprint positioning stage, a light gradient boosting machine (LightGBM) is trained with mutually exclusive feature bundling and histogram optimization to obtain an accurate positioning model. The method is tested in an actual environment. The experimental results show that the positioning accuracy of the LightGBM method is 90% within a range of 1.53 m. Compared with the single-fingerprint positioning method, the accuracy is improved by more than 20%, and the performance is improved by more than 15% compared with other methods. The average locating error is 0.78 m.