Coherence between Decomposed Components of Wrist and Finger PPG Signals by Imputing Missing Features and Resolving Ambiguous Features

WF-PPG: A Wrist-finger Dual-Channel Dataset for Studying the Impact of Contact Pressure on PPG Morphology

Photoplethysmography (PPG) is a simple optical technique widely used in wearable devices for continuous cardiac health monitoring. However, the quality of PPG signals, particularly their morphology, is influenced by the contact pressure between the skin and the sensor. This variability in signal quality complicates complex tasks that rely on high-quality signals, such as blood pressure and heart rate variability estimation, making them less reliable or even impossible. To address this issue, we present a novel dataset (termed WF-PPG) comprising PPG signals from the wrist measured under varying contact pressures, along with high-quality PPG signals from the fingertip captured simultaneously. Data collection was conducted using a custom device setup capable of precisely adjusting the contact pressure for wrist PPG signals while also recording additional metrics such as contact pressure, electrocardiogram (ECG), blood pressure, and oxygen saturation. WF-PPG is designed to facilitate the analysis of effects of contact pressure on PPG morphology and to support the development and evaluation of advanced data-driven techniques aimed at enhancing the reliability of PPG-based health monitoring.

CogWatch: An open-source platform to monitor physiological indicators for cognitive workload and stress

Cognitive workload is a measure of the mental resources a user is dedicating to a given task. Low cognitive workload produces boredom and decreased vigilance, which can lead to an increase in response time. Under high cognitive workload the information processing burden of the user increases significantly, thereby compromising the ability to effectively monitor their environment for unexpected stimuli or respond to emergencies. In cognitive workload and stress monitoring research, sensors are used to measure applicable physiological indicators to infer the state of user. For example, electrocardiography or photoplethysmography are often used to track both the rate at which the heart beats and variability between the individual heart beats. Photoplethysmography and chest straps are also used in studies to track fluctuations in breathing rate. The Galvanic Skin Response is a change in sweat rate (especially on the palms and wrists) and is typically measured by tracking how the resistance of two probes at a fixed distance on the subject's skin changes over time. Finally, fluctuations in Skin Temperature are typically tracked with thermocouples or infrared light (IR) measuring systems in these experiments. While consumer options such a smartwatches for health tracking often have the integrated ability to perform photoplethysmography, they typically perform significant processing on the data which is not transparent to the user and often have a granularity of data that is far too low to be useful for research purposes. It is possible to purchase sensor boards that can be added to Arduino systems, however, these systems generally are very large and obtrusive. Additionally, at the high end of the spectrum there are medical tools used to track these physiological signals, but they are often very expensive and require specific software to be licensed for communication. In this paper, an open-source solution to create a physiological tracker with a wristwatch form factor is presented and validated, using conventional off-the-shelf components. The proposed tool is intended to be applied as a cost-effective solution for research and educational settings.

Schrödinger spectrum based continuous cuff-less blood pressure estimation using clinically relevant features from PPG signal and its second derivative

The presented study estimates cuff-less blood pressure (BP) from photoplethysmography (PPG) signals using multiple machine-learning (ML) models and the semi-classical signal analysis (SCSA) technique. The study proposes a novel signal reconstruction algorithm, which optimizes the semi-classical constant of the SCSA approach and eliminates the trade-off between complexity and accuracy during signal reconstruction. It predicts BP values using regression algorithms by processing reconstructed PPG signals' spectral features, extracting clinically relevant PPG and its second derivative's (SDPPG) morphological features. The developed method was assessed using a virtual in-silico dataset with more than 4000 subjects and the Multi-Parameter Intelligent Monitoring in Intensive Care Units (MIMIC-II) dataset. Results showed that the method attained a mean absolute error (MAE) of 5.37 and 2.96 mmHg for systolic and diastolic BP, respectively, using the CatBoost algorithm. This approach met the Association for the Advancement of Medical Instrumentation's standard and achieved Grade A for all BP categories in the British Hypertension Society protocol. The proposed framework performs well even when applied to a combined clinically relevant database originating from MIMIC-III and the Queensland dataset. The proposed method's performance is further evaluated in a non-clinical setting with noisy and deformed PPG signals to validate the efficacy of the SCSA method. The noise stress tests further showed that the algorithm maintained its key feature detection, signal reconstruction capability, and estimation accuracy up to a 10 dB SNR ratio. The proposed cuff-less BP estimation technique has the potential to perform well in mobile healthcare devices due to its straightforward implementation approach.

Research on heart rate extraction method based on mobile phone video

As an important indicator of human health, heart rate is related to the diagnosis of cardiovascular diseases. In recent years, extracting the heart rate from the mobile phone image has become a research hotspot. However, the illumination intensity of the background, frame rate of the video, and resolution of the image influence heart rate detection accuracy. To overcome these problems, this study proposed a novel heart rate extraction method based on mobile video. Firstly, the mobile phone camera is engaged to record the finger video, the region of interest (ROI) is extracted through the iterative threshold, and the pulse signal is obtained according to the grayscale change of the resolution within the ROI. Then, a low-pass and a high-pass Butterworth filters are exploited to filter out the noise and interframes from the extracted pulse signal. Finally, an improved adaptive peak extraction algorithm is proposed to detect the pulse peaks and the heart rate derived from the difference in pulse peaks. The experimental results show that light intensity, frame rate and resolution all have an influence on the heart rate extraction accuracy, with the most obvious influence of light, the average accuracy of the experiment can reach 99.32 % under good lighting conditions, while only 72.23 % under poor lighting conditions. In terms of frame rate, increasing the frame rate from 30 fps to 60 fps, the accuracy is improved by 0.9 %. For the resolution, increasing the resolution from 1080 p to 2160 p, the accuracy is improved by 1.12 %. While comparing the proposed method with existing methods, the proposed method has a higher accuracy rate, which has important practical value and application prospects in telemedicine and daily monitoring.

Advances in Wearable Photoplethysmography Applications in Health Monitoring

In the last few years, interest in wearable technology for physiological signal monitoring is rapidly growing, especially during and after the COVID-19 pandemic [...].

A Study of Brain Function Characteristics of Service Members at High Risk for Accidents in the Military

Military accidents are often associated with stress and depressive psychological conditions among soldiers, and they often fail to adapt to military life. Therefore, this study analyzes whether there are differences in EEG and pulse wave indices between general soldiers and three groups of soldiers who have not adapted to military life and are at risk of accidents. Data collection was carried out using a questionnaire and a device that can measure EEG and pulse waves, and data analysis was performed using SPSS. The results showed that the concentration level and brain activity indices were higher in the general soldiers and the soldiers in the first stage of accident risk. The body stress index was higher for each stage of accident risk, and the physical vitality index was higher for general soldiers. Therefore, it can be seen that soldiers who have not adapted to military life and are at risk of accidents have somewhat lower concentration and brain activity than general soldiers, and have symptoms of stress and lethargy. The results of this study will contribute to reducing human accidents through EEG and pulse wave measurements not only in the military but also in occupations with a high risk of accidents such as construction.

Photoplethysmogram based vascular aging assessment using the deep convolutional neural network

Arterial stiffness due to vascular aging is a major indicator during the assessment of cardiovascular risk. In this study, we propose a method for age estimation by applying deep learning to a photoplethysmogram (PPG) for the non-invasive assessment of the vascular age. The proposed deep learning-based age estimation model consists of three convolutional layers and two fully connected layers, and was developed as an explainable artificial intelligence model with Grad-Cam to explain the contribution of the PPG waveform characteristic to vascular age estimation. The deep learning model was developed using a segmented PPG by pulse from a total of 752 adults aged 20-89 years, and the performance was quantitatively evaluated using the mean absolute error, root-mean-squared-error, Pearson's correlation coefficient, and coefficient of determination between the actual and estimated ages. As a result, a mean absolute error of 8.1 years, root mean squared error of 10.0 years, correlation coefficient of 0.61, and coefficient of determination of 0.37, were obtained. A Grad-Cam, used to determine the weight that the input signal contributes to the result, was employed to verify the contribution to the age estimation of the PPG segment, which was high around the systolic peak. The results of this study suggest that a convolutional-neural-network-based explainable artificial intelligence model outperforms existing models without an additional feature detection process. Moreover, it can provide a rationale for PPG-based vascular aging assessment.