1
|
Validity and Reliability of Force-Time Characteristics Using a Portable Load Cell for the Isometric Midthigh Pull. J Strength Cond Res 2024; 38:185-191. [PMID: 38085628 DOI: 10.1519/jsc.0000000000004672] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2023]
Abstract
ABSTRACT Pichardo, AW, Neville, J, Tinwala, F, Cronin, JB, and Brown, SR. Validity and reliability of force-time characteristics using a portable load cell for the isometric midthigh pull. J Strength Cond Res 38(1): 185-191, 2024-Many practitioners use the isometric midthigh pull (IMTP) to assess maximal strength in a safe, time-effective manner. However, expensive, stationary force plates are not always practical in a large team setting. Therefore, the purpose of this study was to establish the validity and between-session reliability of peak force, rate of force development (RFD), and impulse during an IMTP using 2 experimental protocols: a traditional fixed bar with a force plate (BarFP) and a flexible chain measured with a force plate (ChainFP) and a load cell (ChainLC). After a familiarization session, 13 resistance-trained men performed 3 trials of the BarFP condition and 3 trials of the chain-based conditions. The identical procedures were replicated twice more, with a week between each testing session. The main findings were (a) no RFD or impulse measures were found to achieve acceptable reliability across all methodological approaches and testing occasions; (b) peak force was reliable across all methods, with coefficient of variation ranging from 4.6 to 8.3%, intraclass correlation coefficient ranging from 0.94 to 0.98, and the least variability associated with the ChainLC condition; and (c) the ChainFP method was found to significantly underrepresent peak force by 4.8% (p < 0.05), with no significant differences between the ChainLC and BarFP methods. Therefore, the ChainLC would seem a valid, reliable, portable, and cost-effective alternative to force plates when assessing maximal isometric strength in the IMTP.
Collapse
|
2
|
Validity and Reliability of a Load Cell Sensor-Based Device for Assessment of the Isometric Mid-Thigh Pull Test. SENSORS (BASEL, SWITZERLAND) 2023; 23:5832. [PMID: 37447682 DOI: 10.3390/s23135832] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/27/2023] [Revised: 06/09/2023] [Accepted: 06/21/2023] [Indexed: 07/15/2023]
Abstract
In recent years, there has been an exponential increase in the number of devices developed to measure or estimate physical exercise. However, before these devices can be used in a practical and research environment, it is necessary to determine their validity and reliability. The purpose of this study is to test the validity and reliability of a load cell sensor-based device (LC) for measuring the peak force (PFr) and the rate of force development (RFD) during the isometric mid-thigh pull (IMTP) test, using a force plate (FP) as the gold standard. Forty-two undergraduate sport science students (male and female) participated in this study. In a single session, they performed three repetitions of the IMTP test, being tested simultaneously with an LC device and a Kistler force platform (FP). The PFr and RFD data were obtained from the force-time curve of the FP and compared with the LC data, provided automatically by the software of the device (Smart Traction device©). The mean difference between the results obtained by the LC device and the gold-standard equipment (FP) was not significantly different (p > 0.05), for both PFr and RFD, which suggests the validity of the ST results. Bland-Altman analysis showed a small mean difference in PFr = 1.69 N, upper bound = 47.88 N, and lower bound = -51.27 N. RFD showed that the mean difference was -5.27 N/s, upper limit = 44.36 N/s, and lower limit = -54.91 N/s. Our results suggest that the LC device can be used in the assessment of the isometric-mid-thigh-pull test as a valid and reliable tool. It is recommended that this device's users consider these research results before putting the ST into clinical practice.
Collapse
|
3
|
Influence of muscle strength, power, and rapid force capacity on maximal club head speed in male national level golfers. J Sports Sci 2023; 41:912-924. [PMID: 37585706 DOI: 10.1080/02640414.2023.2245998] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2022] [Accepted: 08/02/2023] [Indexed: 08/18/2023]
Abstract
This study investigated the relationships between maximal club head speed (CHS) and physiological and anthropometric parameters in 21 national-level male golfers (age: 21.9 ± 3.9 years; handicap: +1.1 ± 1.7). Maximal isometric strength (MVC) was measured during isometric mid-thigh pull and bench press, while MVC and rate of force development (RFD) were measured during isometric leg press. Power, lower limb stiffness, positive impulse, jump height and RFDdyn were measured during countermovement jump (CMJ). Moreover, rotational trunk power, active range of motion (AROM) and anthropometrics were determined. Comparisons were made between participants with high (FTG) and low (STG) CHS, respectively. FTG demonstrated greater isometric mid-thigh pull and isometric bench press MVC, leg press RFD, rotational trunk power, and CMJ parameters (except RFDdyn) as well as reduced hip AROM compared to STG (P < 0.01). CHS was positively correlated to isometric mid-thigh pull and isometric bench press MVC, leg press RFD, rotational trunk power and CMJ parameters (P < 0.01). In conclusion, strong positive correlations were observed between maximal CHS and maximal strength and power parameters. Consequently, improving maximal neuromuscular strength and power may be considered of importance for golfers, as greater CHS and accompanying driving distance may lead to competitive advantages.
Collapse
|
4
|
Acute Performance, Daily Well-Being, and Hormone Responses to Water Immersion After Resistance Exercise in Junior International and Subelite Male Volleyball Athletes. J Strength Cond Res 2023:00124278-990000000-00243. [PMID: 37043600 DOI: 10.1519/jsc.0000000000004428] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/14/2023]
Abstract
ABSTRACT Horgan, BG, Tee, N, West, NP, Drinkwater, EJ, Halson, SL, Colomer, CME, Fonda, CJ, Tatham, J, Chapman, DW, and Haff, GG. Acute performance, daily well-being and hormone responses to water immersion after resistance exercise in junior international and subelite male volleyball athletes. J Strength Cond Res XX(X): 000-000, 2023-Athletes use postexercise hydrotherapy strategies to improve recovery and competition performance and to enhance adaptative responses to training. Using a randomized cross-over design, the acute effects of 3 postresistance exercise water immersion strategies on perceived recovery, neuromuscular performance, and hormone concentrations in junior international and subelite male volleyball athletes (n = 18) were investigated. After resistance exercise, subjects randomly completed either 15-minute passive control (CON), contrast water therapy (CWT), cold (CWI), or hot water immersion (HWI) interventions. A treatment effect occurred after HWI; reducing perceptions of fatigue (HWI > CWT: p = 0.05, g = 0.43); improved sleep quality, compared with CON (p < 0.001, g = 1.15), CWI (p = 0.017, g = 0.70), and CWT (p = 0.018, g = 0.51); as well as increasing testosterone concentration (HWI > CWT: p = 0.038, g = 0.24). There were trivial to small (p < 0.001-0.039, g = 0.02-0.34) improvements (treatment effect) in jump performance (i.e., squat jump and countermovement jump) after all water immersion strategies, as compared with CON, with high variability in the individual responses. There were no significant differences (interaction effect, p > 0.05) observed between the water immersion intervention strategies and CON in performance (p = 0.153-0.99), hormone (p = 0.207-0.938), nor perceptual (p = 0.368-0.955) measures. To optimize recovery and performance responses, e.g., during an in-season competition phase, postresistance exercise HWI may assist with providing small-to-large improvements for up to 38 hours in perceived recovery (i.e., increased sleep quality and reduced fatigue) and increases in circulating testosterone concentration. Practitioners should consider individual athlete neuromuscular performance responses when prescribing postexercise hydrotherapy. These findings apply to athletes who aim to improve their recovery status, where postresistance exercise HWI optimizes sleep quality and next-day perceptions of fatigue.
Collapse
|
5
|
Test-retest reliability of isometric mid-thigh pull maximum strength assessment: a systematic review. Biol Sport 2022; 39:407-414. [PMID: 35309521 PMCID: PMC8919882 DOI: 10.5114/biolsport.2022.106149] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/08/2021] [Revised: 02/07/2021] [Accepted: 03/20/2021] [Indexed: 11/17/2022] Open
Abstract
The aim of this systematic review was to explore the test-retest reliability of isometric mid-thigh pull maximum strength assessment. We searched through five databases to find studies that examined the test-retest reliability of peak force in the isometric mid-thigh pull exercise. From each included study, we extracted intra-class correlation coefficients (ICC) and/or coefficient of variation (CV). The methodological quality of the included studies was evaluated using the COSMIN checklist. A total of 16 good-to-excellent quality studies were included in the review. When considering results from all included studies, ICCs ranged from 0.73 to 0.99 (median ICC = 0.96), where 78% of ICCs were ≥ 0.90, and 98% of ICCs were ≥ 0.75. The range of reported CVs was from 0.7% to 11.1% (median CV = 4.9%), where 58% of CVs were ≤ 5%. Reliability was also good-to-excellent for both relative and absolute peak force and for both bilateral and unilateral isometric mid-thigh pull tests. The majority of studies did not find significant differences between testing sessions. It can be concluded that the isometric mid-thigh pull maximum strength assessment has good-to-excellent test-retest reliability. The isometric mid-thigh pull maximum strength assessment can be used as a reliable test in sports practice and for research purposes.
Collapse
|
6
|
Post-activation Performance Enhancement after a Bout of Accentuated Eccentric Loading in Collegiate Male Volleyball Players. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 2021; 18:ijerph182413110. [PMID: 34948721 PMCID: PMC8701043 DOI: 10.3390/ijerph182413110] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/13/2021] [Revised: 12/09/2021] [Accepted: 12/09/2021] [Indexed: 01/10/2023]
Abstract
The purpose of this study was to investigate the benefit of post-activation performance enhancement (PAPE) after accentuated eccentric loading (AEL) compared to traditional resistance loading (TR). Sixteen male volleyball athletes were divided in AEL and TR group. AEL group performed 3 sets of 4 repetitions (eccentric: 105% of concentric 1RM, concentric: 80% of concentric 1RM) of half squat, and TR group performed 3 sets of 5 repetitions (eccentric & concentric: 85% of 1RM). Countermovement jump (CMJ), spike jump (SPJ), isometric mid-thigh pull (IMTP), and muscle soreness test were administered before (Pre) exercise, and 10 min (10-min), 24 h (24-h), and 48 h (48-h) after exercise. A two-way repeated measures analysis of variance was used to analyze the data. Peak force and rate of development (RFD) of IMTP in AEL group were significantly greater (p < 0.05) than TR group. The height, peak velocity, and RFD of CMJ, height of SPJ, and muscle soreness showed no interaction effects (p > 0.05) groups x time. AEL seemed capable to maintain force production in IMTP, but not in CMJ and SPJ. It is recommended the use of accentuated eccentric loading protocols to overcome the fatigue.
Collapse
|
7
|
Strong, Fast, Fit, Lean, and Safe: A Positional Comparison of Physical and Physiological Qualities Within the 2020 Australian Women's Rugby League Team. J Strength Cond Res 2021; 35:S11-S19. [PMID: 34319942 DOI: 10.1519/jsc.0000000000004106] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
ABSTRACT Minahan, C, Newans, T, Quinn, K, Parsonage, J, Buxton, S, and Bellinger, P. Strong, Fast, Fit, Lean, and Safe: A positional comparison of physical and physiological qualities within the 2020 Australian Women's Rugby League team. J Strength Cond Res 35(12S): S11-S19, 2021-The purpose of the present study was to report the physical and physiological characteristics of elite women Rugby League (RL) players. Thirty-nine women (25.6 ± 4.3 years, 171.3 ± 7.7 cm, 83.5 ± 13.9 kg) from the 2020 Australian women's RL squad were recruited for this study. Players were categorized as adjustables (n = 7), backs (n = 15), or forwards (n = 17) for analysis. Each player was assessed for anthropometry, body composition (dual-energy X-ray absorptiometry), speed (5, 10 and 20 m sprint times), lower-body power (countermovement jump), upper-body power (medicine ball throw and explosive push up force), estimated one repetition maximum (e1RM) bench press, squat and bench pull, isometric mid-thigh pull strength, eccentric knee flexor strength, isometric hip abduction and adduction, and intermittent endurance performance (30-15 intermittent fitness test; 30-15 IFT). Linear mixed models were performed to compare positional groups. Forwards were significantly heavier and had greater fat mass, fat-free mass, and body fat percentage compared with backs and adjustables (P < 0.01). Backs were faster over 20 m compared with forwards (P = 0.025), whereas forwards had a lower 30-15 IFT peak velocity and estimated V̇o2peak compared with backs and adjustables. Nonetheless, when including body mass in the model, there were no differences between groups in 30-15 IFT peak velocity. There were no significant differences in other variables. These results provide contemporary benchmark physical, physiological, and anthropometric data for elite women RL players, which can inform recruitment, selection, training, and testing.
Collapse
|
8
|
The relationship between isometric mid-thigh pull variables and athletic performance measures: empirical study of English professional soccer players and meta-analysis of extant literature. J Sports Med Phys Fitness 2020; 61:645-655. [PMID: 33146489 DOI: 10.23736/s0022-4707.20.11205-2] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
BACKGROUND There is currently limited evidence available to support the use of the isometric mid-thigh pull (IMTP) within professional soccer. The aim of this study was to analyze the association between IMTP variables, with common markers of athletic performance capability. METHODS Eleven professional development soccer players (age: 20±2 years, stature: 1.82±0.10 m, mass: 76.4±12.8 kg) performed IMTP, 5 m and 10 m accelerations, maximal sprint speed (MSS), countermovement jump (CMJ), and the 505 change of direction test (COD). RESULTS Relative and absolute peak force (PF) and force at 50, 100, 150 and 200 ms values were measured during the IMTP. Relative F150, F200, PF displayed large to very large correlations with MSS (r=0.51, r=0.66, and r=0.76 respectively), while absolute PF also displayed a large correlation with MSS (r=0.57). Relative and absolute PF showed large correlations with CMJ height (r=0.54 and r=0.55 respectively). Relative F150 and F200 highlighted large correlations with COD ability (r=-0.68 and r=-0.60 respectively). Relative F200 and PF had a large negative correlation with 10 m acceleration (r=-0.55 and r=-0.53 respectively). CONCLUSIONS This study provides an important contribution to knowledge within the area of IMTP testing in professional soccer by evidencing the prominence of the isometric force generating capacity as an underpinning factor in relation to athletic capability.
Collapse
|
9
|
Utility of a Shortened Isometric Midthigh Pull Protocol for Assessing Rapid Force Production in Athletes. J Strength Cond Res 2020; 36:1819-1825. [PMID: 33044370 DOI: 10.1519/jsc.0000000000003774] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Suarez, DG, Carroll, KM, Slaton, JA, Rochau, KG, Davis, MW, and Stone, MH. Utility of a shortened isometric midthigh pull protocol for assessing rapid force production in athletes. J Strength Cond Res XX(X): 000-000, 2020-The purpose of this investigation was to determine the magnitude of difference, reliability, and relationship to performance of a shortened isometric midthigh pull (IMTP) protocol. Fourteen strength-trained men (age: 26.8 ± 5.0 years, height: 176.3 ± 6.9 cm, body mass: 86.8 ± 13.9 kg, and training age: 8.5 ± 6.9 years) performed 1-second (SHORT) and traditional (TRAD) IMTP protocols during consecutive weeks. Peak force (PF), instantaneous force (90 & 200 ms), rate of force development (RFD) (0-90 ms & 0-200 ms), and impulse (0-90 ms & 0-200 ms) from each protocol were collected. Paired samples t test and Hedge's g were calculated to determine the magnitude of difference in each variable between protocols. Within-session and between-session reliability was assessed with intraclass correlation coefficient, coefficient of variation, and 95% confidence intervals. Static jumps were performed to compare relationships of the IMTP variables from each protocol with jumping performance. There was no statistically significant (p > 0.05) difference in PF between the protocols (p = 0.345; g = -0.07). All early force-time variables were significantly higher in the SHORT protocol (p = <0.001-0.018; g = 0.38-0.79). The SHORT protocol resulted in more reliable RFD measures within-session. Correlations with jumping performance were mostly similar between protocols (r = 0.253-0.660). The SHORT IMTP protocol resulted in comparable PF values and considerably higher early force-time characteristics despite a restrained time to produce force and shorter rest. The SHORT protocol allows for an accurate assessment of rapid force-generating abilities while necessitating shorter collection periods than typical IMTP protocols.
Collapse
|
10
|
The Reliability of Neuromuscular and Perceptual Measures Used to Profile Recovery, and the Time-Course of such Responses following Academy Rugby League Match-Play. Sports (Basel) 2020; 8:E73. [PMID: 32456075 PMCID: PMC7281125 DOI: 10.3390/sports8050073] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2020] [Revised: 05/19/2020] [Accepted: 05/20/2020] [Indexed: 01/08/2023] Open
Abstract
In professional academy rugby league (RL) players, this two-part study examined; A) the within- and between-day reliability of isometric mid-thigh pulls (IMTP), countermovement jumps (CMJ), and a wellness questionnaire (n = 11), and B) profiled the responses with acceptable reliability (no between-trial differences and between-day coefficient of variation (CV) ≤10% and intraclass correlation coefficient (ICC) ≥0.8) for 120 h (baseline: -3, +24, +48, +72, +96, +120 h) following RL match-play (n = 10). In part A, force at 200, and 250 ms, and peak force (PF) demonstrated acceptable within- (CV%: 3.67-8.41%, ICC: 0.89-0.93) and between-day (CV%: 4.34-8.62%, ICC: 0.87-0.92) reliability for IMTP. Most CMJ variables demonstrated acceptable within-day reliability (CV%: 3.03-7.34%, ICC: 0.82-0.98), but only six (i.e., flight-time, PF, peak power (PP), relative PP, velocity at take-off (VTO), jump-height (JH)) showed acceptable between-day reliability (CV%: 2.56-6.79%, ICC: 0.83-0.91). Only total wellness demonstrated acceptable between-day reliability (CV%: 7.05%, ICC: 0.90) from the questionnaire. In part B, reductions of 4.75% and 9.23% (vs. baseline; 2.54 m∙s-1; 0.33 m) occurred at +24 h for CMJ VTO, and JH, respectively. Acceptable reliability was observed in some, but not all, variables and the magnitude and time-course of post-match responses were test and variable specific. Practitioners should therefore be mindful of the influence that the choice of recovery monitoring tool may have upon the practical interpretation of the data.
Collapse
|
11
|
|