Production of Eco-Sustainable Materials: Compatibilizing Action in Poly (Lactic Acid)/High-Density Biopolyethylene Bioblends

Comparative Evaluation of the Stiffness of Abaca-Fiber-Reinforced Bio-Polyethylene and High Density Polyethylene Composites

The use of bio-based matrices together with natural fibers as reinforcement is a strategy for obtaining materials with competitive mechanical properties, costs, and environmental impacts. However, bio-based matrices, unknown by the industry, can be a market entry barrier. The use of bio-polyethylene, which has properties similar to polyethylene, can overcome that barrier. In this study, composites reinforced with abaca fibers used as reinforcement for bio-polyethylene and high density polyethylene are prepared and tensile tested. A micromechanics analysis is deployed to measure the contributions of the matrices and reinforcements and to measure the evolution of these contributions regarding AF content and matrix nature. The results show that the mechanical properties of the composites with bio-polyethylene as a matrix were slightly higher than those of the composites with polyethylene as a matrix. It was also found that the contribution of the fibers to the Young's moduli of the composites was susceptible to the percentage of reinforcement and the nature of the matrices. The results show that it is possible to obtain fully bio-based composites with mechanical properties similar to those of partially bio-based polyolefin or even some forms of glass fiber-reinforced polyolefin.

Blending of Low-Density Polyethylene and Poly(Butylene Succinate) (LDPE/PBS) with Polyethylene-Graft-Maleic Anhydride (PE-g-MA) as a Compatibilizer on the Phase Morphology, Mechanical and Thermal Properties

It is of significant concern that the buildup of non-biodegradable plastic waste in the environment may result in long-term issues with the environment, the economy and waste management. In this study, low-density polyethylene (LDPE) was compounded with different contents of poly(butylene succinate) (PBS) at 10-50 wt.%, to evaluate the potential of replacing commercial plastics with a biodegradable renewable polymer, PBS for packaging applications. The morphological, mechanical and thermal properties of the LDPE/PBS blends were examined in relation to the effect of polyethylene-graft-maleic anhydride (PE-g-MA) as a compatibilizer. LDPE/PBS/PE-g-MA blends were fabricated via the melt blending method using an internal mixer and then were compression molded into test samples. The presence of LDPE, PBS and PE-g-MA individually in the matrix for each blend presented physical interaction between the constituents, as shown by Fourier-transform infrared spectroscopy (FTIR). The morphology of LDPE/PBS/PE-g-MA blends showed improved compatibility and homogeneity between the LDPE matrix and PBS phase. Compatibilized LDPE/PBS blends showed an improvement in the tensile strength, with 5 phr of compatibilizer providing the optimal content. The thermal stability of LDPE/PBS blends decreased with higher PBS content and the thermal stability of compatibilized blends was higher in contrast to the uncompatibilized blends. Therefore, our research demonstrated that the partial substitution of LDPE with a biodegradable PBS and the incorporation of the PE-g-MA compatibilizer could develop an innovative blend with improved structural, mechanical and thermal properties.

Performance of Poly(caprolactone) (PCL) as an Impact Modifier for Polystyrene (PS): Effect of Functionalized Compatibilizers with Maleic Anhydride and Glycidyl Methacrylate

In this work, the copolymers ethylene-glycidyl methacrylate (E-GMA), ethylene methyl methacrylate-glycidyl methacrylate (EMA-GMA), and styrene-(ethylene-butylene)-styrene grafted with maleic anhydride (SEBS-g-MA) were used to compatibilize polystyrene (PS)/poly(caprolactone) (PCL) blends. The blends were processed in a co-rotating twin-screw extruder and injection molded. Samples were investigated by torque rheometry, capillary rheometry, impact strength, tensile strength, heat deflection temperature (HDT), dynamic-mechanical thermal analysis (DMTA), thermogravimetry (TG), and scanning electron microscopy (SEM). Torque rheometry indicated that glycidyl methacrylate functional groups and maleic anhydride groups interact with PCL. Capillary rheometry evidenced that at shear rates lower than 10,000 s−1, the PS/PCL/SEBS-g-MA blends presented the highest apparent viscosity among the blends. Such behavior was possibly due to the good interaction between SEBS-g-MA and the PS and PCL phases. Consequently, the properties of impact strength, elongation at break, tensile strength, and elastic modulus were improved by 30%, 109%, 33.8%, and 13.7%, respectively, compared with the non-compatibilized PS/PCL system. There was a reduction in the HDT of all blends compared with neat PS, given the elastomeric characteristics of PCL and compatibilizers. The DMTA results revealed two independent peaks in the blends (one around −53 °C concerning the PCL phase and another at 107 °C related to PS), confirming their immiscibility. The PS/PCL/SEBS-g-MA blends showed higher morphological stability, confirming their good mechanical properties.