Using a Particle Counter to Inform the Creation of Similar Exposure Groups and Sampling Protocols in a Structural Steel Fabrication Facility

Welding Fume Exposure and Health Risk Assessment in a Cohort of Apprentice Welders

Welding fumes vary in composition depending on the materials and processes used, and while health outcomes in full-time welders have been widely studied, limited research on apprentices exists. Besides, few data are available for metals such as vanadium and antimony. This study aimed to look at individual metals present in welding fumes in the learning environment of apprentice welders. Forty-three welders and 41 controls were chosen from trade programmes at the Northern Alberta Institute of Technology. Ambient and personal air samples were collected at days 0, 1, 7, and 50 of their training and analysed for mass and metal concentrations using Inductively Coupled Plasma Mass Spectrometry. Results showed increases in particle and metal concentrations as apprentices progressed throughout their education and that concentrations at day 50 were similar to levels found in the literature for professional welders. Variable concentrations indicate that some individuals may not properly use the local exhaust ventilation system. Other possible explanation for variations are the position of the sampler on the shoulder, the time spent welding and in each welding position, and the skills of the welders. Strong relationships were observed between particle and metal concentrations, suggesting that these relationships could be used to estimate metal exposure in welders from particle exposure. Welding processes were the most important determinant of exposure in apprentice welders, with Metal Core Arc Welding producing the largest particle concentrations followed by oxyacetylene cutting, and Gas Metal Arc Welding. Health risk assessment showed that welder apprentices are at risk for overexposure to manganese, which suggests that professional welders should be monitored for manganese as they are exposed more than apprentices. Training in proper positioning of local exhaust ventilation system and proper use of respirators are recommended in training facilities.

[Study on the Establishment of a Specific Similar Exposure Group (SEG) in Personal Exposure Monitoring: A Case Report of Indium Tin Oxide Target Surface Grinding Process]

Surface grinding workers of Indium Tin Oxide target material are exposed to an indium compound with high toxicity. We divided individual exposure workers into similar exposure groups (SEG) and examined the effectiveness of the classification of SEG. Sampling was carried out twice a day for a total of 10 times, in 9 of which a work environment measurement in unit work area was performed at the same time. The classification examined two methods. One method was to set all the workers in the work place as one group (SEG1), and the other was to classify them depending on whether the workers handled the target material contained indium or not (SEG2). The group handled indium-contained material was SEG2(+) n=9, and the other was SEG2(-) n=9. Only the arithmetic mean value (AM) of four groups 2.8-27.4 µg/m³ in the SEG2(+) was lower than the measurement B value of the work environment measurement, but the AM of all the groups in SEG2(+) 2.8-276.8 µg/m³ was higher than the geometric mean value of measurement A 0.4-12.3 µg/m³. The concentration range of 100 μg/m³ or more of SEG2(+) AM was 20% of the total. This range was not recognized in the other items, and the variation of SEG2(+) was small. Even though the evaluation of SEG1 is control class 2, if revaluated on SEG2(+), 50% of the SEG2(+) were evaluated as control class 3. It is possible to efficiently manage chemical substances by establishing specific SEG properly stratified.