Potential Viable Products Identified from Characterisation of Agricultural Slaughterhouse Rendering Wastewater

Differential overload simulation of condensate and housekeeping rendering wastewater for nutrient removal

The meat rendering process transforms waste from the meat industry to valuable materials as animal feed supplements. During the rendering process, large amounts of condensate and housekeeping wastewater (CWW and HKWW), solids and greenhouse gases are released into the environment imposing a huge pollution threat. Rendering condensate wastewater also causes many issues that commonly affect biological treatment processes such as pH inhibition, nutrient deficit and temperature. Therefore, the main objective of this work was to simulate the nutrient removal from a sequencing batch reactor (SBR) through the differential nitrogen overload of CWW. With aid of simulation, results found that the current SBR system does not remove carbon and nitrogen as much as other biological systems. This is due to low biodegradation of chemical oxygen demand (COD), the high content of inert particulate carbon (XI), identified in the fractionation of HKWW, and the toxic and inhibitory effect of ammonium present in CWW. When the system is overloaded with nitrogen from CWW there is little removal of biochemical oxygen demand (BOD), ordinary heterotrophic organisms (OHO) outnumber autotrophic nitrifying organisms (ANO) and ammonium toxicity occurs, all contributing to a failure to remove nutrients.

Identification of some microbial flora contained in slaughterhouse effluent and likely to be effective in its treatment by biological process

The specific contributions of the different bacterial flora during the biological treatment of slaughterhouse effluents remain unclear. The objective of this study is to identify the different microbial flora which mainly contribute to the efficiency of the biodegradation of the organic, nitrogenous and phosphate loads contained in the slaughterhouse effluent during its biological treatment. To achieve this, the effluent to be treated was sampled from three slaughterhouses in the city of Ngaoundéré (Cameroon). The various effluents underwent a physicochemical and microbiological characterization. The effluent was subjected to biological treatment. The biodegradation process (biological treatment) took place in two reactors, each operating in batch. One of the two reactors was supplied with oxygen (aeration). The effluent being treated underwent a physicochemical and microbiological characterization for 30 days. The results obtained show organic matter and ammonium contents >1,000 mgO2/L in each of the three effluents. Bacillus cereus (69 × 108 CFU/mL), Pseudomonas aeruginosa (201 × 107 colony forming unit (CFU)/mL) and Yeasts (101 × 106 CFU/mL) globally constitute the majority of microbial groups among the seven microorganisms identified in the effluents of the three slaughterhouses. There is no real oxygenation effect of the medium on the growth of the three microbial flora during the treatment.

Potential ecological risk assessment of heavy metals associated with abattoir liquid waste: A narrative and systematic review

The article presents a narrative and systematic review of the potential ecological risk assessment of heavy metals associated with abattoir liquid waste for knowledge advancement. The narrative review primarily focused on (i) An overview of abattoir operations; (ii) Characteristics of abattoir liquid waste; (iii) Heavy metals in the liquid waste and their health effects; (iv) Environmental impacts of abattoir liquid waste; and (v) Potential ecological risk index (RI) methodology. These provided essential literature for the systematic review. Using exclusive/inclusive criteria, 15 abattoirs that satisfied the eligibility criteria, all located in Nigeria, were used for the systematic review with meta-analysis/meta-regression. Comparative multiple linear meta-regression analyses were used to quantify the heterogeneity variances between the abattoirs based on standardized RIs (SRIs; effect sizes) using eight tau (τ ) estimators in R metafor. The effects of three standardized moderators─ number of metals, metal concentrations, and relative distances between the abattoirs and a pristine environment, Gashaka-Gumti National Park (GNP), were also analyzed. The Sidik-Jonkman (SJ) estimator yielded a realistic output, and the current research findings were based on this estimator. The Cochran statistic (QE) suggested an absence of heterogeneity(p>0.99). Between-study heterogeneities, quantified by H2 (1.05), I2 (4.76%), and τ 2 (0.0032 ± 0.0032 (SE)) statistics were very low, practically suggesting complete homogeneity. The moderators accounted for R * 2 of 95.73% of the total explanatory capacity of the model. The beta coefficients of the moderators and intercept were significant (p-values: 0.009-0.0004). While the first two moderators showed in-phase relations with the SRIs, the third indicated an out-of-phase relation. Such links suggest the existence of abattoir-environment interactive processes. Although the abattoirs are spatially distinct and independent, their operations showed evidence-based homogeneity and posed high ecological risks. Hence, environmental legislation should be strictly enforced while ensuring human settlements are sited reasonably from abattoirs.

Membrane Technologies for Nitrogen Recovery from Waste Streams: Scientometrics and Technical Analysis

The concerns regarding the reactive nitrogen levels exceeding the planetary limits are well documented in the literature. A large portion of anthropogenic nitrogen ends in wastewater. Nitrogen removal in typical wastewater treatment processes consumes a considerable amount of energy. Nitrogen recovery can help in saving energy and meeting the regulatory discharge limits. This has motivated researchers and industry professionals alike to devise effective nitrogen recovery systems. Membrane technologies form a fundamental part of these systems. This work presents a thorough overview of the subject using scientometric analysis and presents an evaluation of membrane technologies guided by literature findings. The focus of nitrogen recovery research has shifted over time from nutrient concentration to the production of marketable products using improved membrane materials and designs. A practical approach for selecting hybrid systems based on the recovery goals has been proposed. A comparison between membrane technologies in terms of energy requirements, recovery efficiency, and process scale showed that gas permeable membrane (GPM) and its combination with other technologies are the most promising recovery techniques and they merit further industry attention and investment. Recommendations for potential future search trends based on industry and end users' needs have also been proposed.

Multi-Integrated Systems for Treatment of Abattoir Wastewater: A Review

Biological wastewater treatment processes such as activated sludge and anaerobic digestion remain the most favorable when compared to processes such as chemical precipitation and ion exchange due to their cost-effectiveness, eco-friendliness, ease of operation, and low maintenance. Since Abattoir Wastewater (AWW) is characterized as having high organic content, anaerobic digestion is slow and inadequate for complete removal of all nutrients and organic matter when required to produce a high-quality effluent that satisfies discharge standards. Multi-integrated systems can be designed in which additional stages are added before the anaerobic digester (pre-treatment), as well as after the digester (post-treatment) for nutrient recovery and pathogen removal. This can aid the water treatment plant effluent to meet the discharge regulations imposed by the legislator and allow the possibility for reuse on-site. This review aims to provide information on the principles of anaerobic digestion, aeration pre-treatment technology using enzymes and a hybrid membrane bioreactor, describing their various roles in AWW treatment. Simultaneous nitrification and denitrification are essential to add after anaerobic digestion for nutrient recovery utilizing a single step process. Nutrient recovery has become more favorable than nutrient removal in wastewater treatment because it consumes less energy, making the process cost-effective. In addition, recovered nutrients can be used to make nutrient-based fertilizers, reducing the effects of eutrophication and land degradation. The downflow expanded granular bed reactor is also compared to other high-rate anaerobic reactors, such as the up-flow anaerobic sludge blanket (UASB) and the expanded granular sludge bed reactor (EGSB).