Advanced Oxidation Processes Based on Sulfate Radicals for Wastewater Treatment: Research Trends

Performance and Mechanism of Brucite/g-C3N4 Catalyst-Activated Peroxymonosulfate for Rapid Degradation of Methylene Blue

The escalating utilization of dyes and the subsequent discharge of dye wastewater have resulted in severe pollution, necessitating urgent development of innovative treatment technologies. This article presents the design of a novel catalyst comprising brucite loaded with nitrogen-deficient carbon nitride nanosheets (FBCN) to activate PMS for the degradation of MB wastewater. The effects of brucite-to-urea ratio, catalyst dosage, PMS concentration, pH value, reaction temperature, natural organic matter and anions, and reusability on MB degradation were investigated. Under optimal conditions, the 12.5%FBCN/PMS system achieved complete degradation (100%) of 10 mg/L MB within 5 min, a significant improvement compared to the FB-600/PMS and g-C3N4/PMS systems. The enhanced catalytic activity can be attributed to the interaction between hydroxyl groups on the surface of brucite and amine groups derived from urea, which accelerates the formation of double nitrogen defects (N vacancies and cyano groups) in g-C3N4 thereby greatly enhancing PMS activation efficiency. In addition, the excellent activation performance of 12.5%FBCN originated from its unique combination to enhance the electron transfer performance between brucite and g-C3N4. The system also generates singlet oxygen radicals (1O2), hydroxyl radicals (·OH), and sulfate radicals (SO4·-), among which 1O2 is identified as being predominantly responsible for MB degradation. This study offers a new approach for designing efficient activators for PMS in environmental remediation.

Sulfate Radical-Based Degradation of Organic Pollutants: A Review on Application of Metal-Organic Frameworks as Catalysts

The degradation of organic pollutants present in domestic and industrial effluents is a matter of concern because of their high persistence and ecotoxicity. Recently, advanced oxidation processes (AOPs) are being emphasized for organic pollutant removal from effluents, as they have shown higher degradation efficiencies when compared to conventional activated sludge processes. Sulfate radical-based methods are some of the AOPs, mainly carried out using persulfate (PS) and peroxymonosulfate (PMS), which have gained attention due to the ease of sulfate radical generation and the effective degradation of organic molecules. PMS is gaining more popularity because of its high reactivity and ability to generate excess sulfate radicals. PMS has been the major focus; therefore, its mechanism has been explained, and limitations have been elaborated. The involvement of metal-organic frameworks for PMS/PS activation applied to organic pollutant removal and recent advances in the application of biochar and hydrogel-assisted metal-organic frameworks have been discussed.

An efficient removal approach for degradation of metformin from aqueous solutions with sulfate radicals

Metformin consumption for diabetes treatment is increasing, leading to its presence in wastewater treatment plants where conventional methods cannot remove it. Therefore, this work aims to analyze the performance of advanced oxidation processes using sulfate radicals in the degradation of metformin from water. Experiments were performed in a photoreactor provided with a low-pressure Hg lamp, using K₂S₂O₈ as oxidant and varying the initial metformin concentration (C_A0), oxidant concentration (C_ox), temperature (T), and pH in a response surface experimental design. The degradation percentages ranged from 26.1 to 87.3%, while the mineralization percentages varied between 15.1 and 64%. Analysis of variance (ANOVA) showed that the output variables were more significantly affected by C_A0, C_ox, and T. Besides, a reduction of C_A0 and an increase of C_ox up to 5000 μM maximizes the metformin degradation since the generation of radicals and their interaction with metformin molecules are favored. For the greatest degradation percentage, the first order apparent rate constant achieved was 0.084 min^-1. Furthermore, while in acidic pH, temperature benefits metformin degradation, an opposite behavior is obtained in a basic medium because of recombination and inhibition reactions. Moreover, three degradation pathways were suggested based on the six products detected by HPLC-MS: N-cyanoguanidine m/z = 85; N,N-dimethylurea m/z = 89; N,N-dimethyl-cyanamide m/z = 71 N,N-dimethyl-formamide m/z = 74; glicolonitrilo m/z = 58; and guanidine m/z = 60. Finally, it was shown that in general the toxicity of the degradation byproducts was lower than the toxicity of metformin toward Chlamydomonas reinhardtii.

Degradation of Textile Dye by Bimetallic Oxide Activated Peroxymonosulphate Process

The sulphate radical based advanced oxidation processes (AOPs) are highly in demand these days, owing to their numerous advantages. Herein, the Fe-Mn bimetallic oxide particle was used to activate peroxymonosulphate (PMS) for Rhodamine B (RhB) degradation. Three bimetallic catalysts were synthesized via the chemical precipitation method with different concentrations of metals; Fe-Mn (1:1), Fe-Mn (1:2) and Fe-Mn (2:1). The best performance was shown by Fe-Mn (2:1) system at optimized conditions; 96% of RhB was removed at optimized conditions. Scavenging experiments displayed the clear dominance of hydroxyl radical in pH 3, while sulphate radical was present in a large amount at pH 7 and 10. The monometallic Fe and Mn oxides were also synthesized to confirm the synergistic effect that was present in the bimetallic oxide system. The application of optimized condition in real textile wastewater was conducted, which revealed the system works efficiently at high concentrations of PMS and catalyst dosage.

Visible Light-Driven Advanced Oxidation Processes to Remove Emerging Contaminants from Water and Wastewater: a Review

The scientific data review shows that advanced oxidation processes based on the hydroxyl or sulfate radicals are of great interest among the currently conventional water and wastewater treatment methods. Different advanced treatment processes such as photocatalysis, Fenton's reagent, ozonation, and persulfate-based processes were investigated to degrade contaminants of emerging concern (CECs) such as pesticides, personal care products, pharmaceuticals, disinfectants, dyes, and estrogenic substances. This article presents a general overview of visible light-driven advanced oxidation processes for the removal of chlorfenvinphos (organophosphorus insecticide), methylene blue (azo dye), and diclofenac (non-steroidal anti-inflammatory drug). The following visible light-driven treatment methods were reviewed: photocatalysis, sulfate radical oxidation, and photoelectrocatalysis. Visible light, among other sources of energy, is a renewable energy source and an excellent substitute for ultraviolet radiation used in advanced oxidation processes. It creates a high application potential for solar-assisted advanced oxidation processes in water and wastewater technology. Despite numerous publications of advanced oxidation processes (AOPs), more extensive research is needed to investigate the mechanisms of contaminant degradation in the presence of visible light. Therefore, this paper provides an important source of information on the degradation mechanism of emerging contaminants. An important aspect in the work is the analysis of process parameters affecting the degradation process. The initial concentration of CECs, pH, reaction time, and catalyst dosage are discussed and analyzed. Based on a comprehensive survey of previous studies, opportunities for applications of AOPs are presented, highlighting the need for further efforts to address dominant barriers to knowledge acquisition.

Application of sulfate radicals-based advanced oxidation technology in degradation of trace organic contaminants (TrOCs): Recent advances and prospects

The large amount of trace organic contaminants (TrOCs) in wastewater has caused serious impacts on human health. In the past few years, Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal rates of recalcitrant TrOCs from water. Peroxymonosulfate (PMS) and persulfate (PS) are stable and non-toxic strong oxidizing oxidants and can act as excellent SO₄^•- precursors. Compared with hydroxyl radicals(·OH)-based methods, SR-AOPs have a series of advantages, such as long half-life and wide pH range, the oxidation capacity of SO₄^•- approaches or even exceeds that of ·OH under suitable conditions. In this review, we present the progress of activating PS/PMS to remove TrOCs by different methods. These methods include activation by transition metal, ultrasound, UV, etc. Possible activation mechanisms and influencing factors such as pH during the activation are discussed. Finally, future activation studies of PS/PMS are summarized and prospected. This review summarizes previous experiences and presents the current status of SR-AOPs application for TrOCs removal. Misconceptions in research are avoided and a research basis for the removal of TrOCs is provided.

Geographical Preference for Installation of Solar Still Water Desalination Technologies in Iran: An Analytical Hierarchy Process (AHP)-Based Answer

Water shortage is one of the most crucial challenges worldwide, especially in the Middle Eastern countries, with high population and low freshwater resources. Considering this point and the increasing popularity of solar stills desalination systems, as the contribution, this study aims at finding the geographical preference for installation of those technologies in Iran, which is one of the biggest and most populated countries in the Middle East. For this purpose, from each climatic zone of Iran, one representative city is chosen, and analytical hierarchy process (AHP), as one of the most powerful tools for systematic decision-making, is applied. Annual fresh water production (AFWP) from the technical aspect, energy payback period (EPBP) from the energy perspective, and investment payback period from the economic point of view are selected as the decision criteria. Obtaining the three indicated indicators is done using artificial neural networks (ANNs) for yield and water temperature in the basin, which are developed by means of the recorded experimental data. The results indicate that hot arid cities with high received solar radiation, or the ones that have a higher water tariff compared to the others, are the preferred places for installation of solar stills. The example of the first category is Ahvaz, while Tehran is representative of the cities from the second category. AHP demonstrates that they are the first and second priorities for solar still installation, with scores of 26.9 and 22.7, respectively. Ahvaz has AWFP, EPBP, and IPP of 2706.5 L, 0.58 years, and 4.01 years; while the corresponding values for Tehran are 2115.3 L, 0.87 years, and 2.86 years. This study belongs to three classifications in the mathematical problems: 1. experimental work (code: 76–05), 2. Neural networks (code: 92B20), 3. and decision problems, (code: 20F10).