Anodic Oxidation of Industrial Winery Wastewater Using Different Anodes

Effect of electrode parameters in the electro-production of reactive oxidizing species via boron-doped diamond under batch mode

Ozone and hydroxyl radicals (^• OH) are powerful reactive oxidizing species (ROS) that are commonly utilized in water disinfection. The electrochemical advanced oxidation process (EAOP) is often used to generate such oxidants, whereas optimizing its experimental setup and electrode parameters plays a crucial role in its performance. This research aims to find the optimal setup for ROS generation process from tap water via the boron-doped diamond. The effect of electrode's active area, type of electrode substrates (mesh or sheet), type of mesh substrate (rolled and unrolled), and number of anodes and cathodes are examined. The results showed that the use of two long-rolled BDD/Nb meshes as anode and one long-rolled mesh as a cathode gives the optimal performance of electrolysis process at 15 V potential and 3 min. These results will provide a start for developing a cost accepted, health-safe, household disinfection device that reduces susceptibility to human life-threatening waterborne diseases. PRACTITIONER POINTS: This research aims to find the optimal setup for ROS generation process from tap water via the boron-doped diamond. The effect of electrode's parameters on the electro-production of ROS is examined. The best performance is achieved using rolled mesh electrodes. Two long-rolled BDD/Nb meshes as anode electrodes and one long-rolled mesh cathode electrode give the optimal electrolysis process performance.

Removal of Recalcitrant Compounds from Winery Wastewater by Electrochemical Oxidation

The electro-oxidation of recalcitrant compounds, phthalic acid, tyrosol, and catechin was studied in simulated and real winery wastewater samples using a boron-doped diamond (BDD) anode. In the simulated samples, catechin, although presenting a higher removal rate than that of phthalic acid and tyrosol, attained lower combustion efficiency, indicating that this compound is readily converted into other products rather than being completely oxidized. On the other hand, phthalic acid was easily mineralized. Regarding the electro-oxidation assays performed with the spiked winery wastewater, recalcitrant compounds and overall organic load removal rates increased with applied current density (j), but the removal efficiency of recalcitrant compounds decreased with the increase in j, and the specific energy consumption was significantly raised. The increase in treatment time showed to be a feasible solution for the WW treatment at lower j. After 14 h treatment at 300 A m−2, phthalic acid, tyrosol, and catechin removals above 99.9% were achieved, with a chemical oxygen demand removal of 98.3%. Moreover, the biodegradability index was increased to 0.99, and toxicity towards Daphnia magna was reduced 1.3-fold, showing that the electro-oxidation process using a BDD anode is a feasible solution for the treatment of winery wastewaters, including phthalic acid, tyrosol, and catechin degradation.