Novel Cell Culture Model Using Pure Hydrostatic Pressure and a Semipermeable Membrane Pouch

The effect of hydrostatic pressure on proteoglycan production in articular cartilage in vitro: a meta-analysis

OBJECTIVE

In previous research the use of hydrostatic pressure (HP) has been applied to enhance the formation of engineered cartilage, through the up-regulation of proteoglycan synthesis by mechanotransduction. However, the HP stimulation approach has been shown to vary between studies with a wide disparity in results, including anabolic, catabolic and non-responsive outcomes. To this end, a meta-analysis of HP publications using 3D cultured chondrocytes was performed to elucidate the key experiment factors involved in achieving a mechanotransducive response.

DESIGN

The effects of different HP regimes on proteoglycan production were investigated based on the following factors: static vs dynamic application, pressure magnitude, and experiment duration. Meta-analysis was performed on raw data taken from 11 publications which employed either aggrecan gene expression analysis or dimethyl methylene blue colorimetric assay. The measure of effect was calculated based on mean difference using a random effects model.

RESULTS

Analysis revealed that a significant anabolic response was most likely achieved when the following factors were employed; a static HP application, a magnitude within the mid-high physiological range of cartilage (≤5-10 MPa) and a study duration of ≥2 weeks.

CONCLUSIONS

Thus, we propose that the selection of HP experiment factors can have a significant influence on engineered cartilage development, and that the results of this meta-analysis can be used as a basis for the planning of future HP experiments.

Effects of hydrostatic pressure and deviatoric stress on human articular chondrocytes for designing neo-cartilage construct

Autologous chondrocyte implantation is a promising therapy for the treatment of the articular cartilage defects. Recently, we have developed a three-dimensional chondrocyte construct manufactured with a collagen gel/sponge scaffold and cyclic hydrostatic pressure. However, the roles of various mechanical stresses, specifically hydrostatic pressure and deviatoric stress, as well as poststress loading, were unclear on metabolic function in chondrocytes. We hypothesized that hydrostatic pressure and deviatoric stresses each alter individual metabolic characteristics of chondrocytes. We embedded human articular chondrocytes within an agarose hydrogel and applied hydrostatic pressure and/or deviatoric stress individually or simultaneously for 4 days. Subsequently, we kept the cell constructs without stress for an additional 3 days. With hydrostatic pressure and/or deviatoric stress, more cells proliferated significantly than no stress (p < .05) and more cells proliferated near the inner side of the construct than the outer (p < .05). Cartilage specific aggrecan core protein and collagen type II were upregulated significantly after off-loading hydrostatic pressure alone at Day 7 (p < .05). On the other hand, these molecules were upregulated significantly immediately after deviatoric stress alone and combined with hydrostatic pressure at Day 4 (p < .05). Tissue inhibitor of metalloproteinase-2 was upregulated significantly after off-loading hydrostatic pressure alone and combined deviatoric stress at Day 7 (p < .05). Metalloproteinnase-13 was upregulated significantly with deviatoric stress at Day 4 (p < .05) and combined with hydrostatic pressure at Day 4. These results suggest that metabolic functions are regulated by the combination of hydrostatic pressure and deviatoric stress and by the timing of stress loading.

Optimization of Extracellular Matrix Synthesis and Accumulation by Human Articular Chondrocytes in 3-Dimensional Construct with Repetitive Hydrostatic Pressure

Objective The effects of hydrostatic pressure (HP) on the matrix synthesis by human articular chondrocytes have been reported elsewhere. In order to optimize the production of extracellular matrix, we aimed to clarify the effects of repetitive HP on metabolic function by human articular chondrocytes. Design The human articular chondrocytes were expanded and embedded within a collagen gel/sponge scaffold. We incubated these constructs with and without HP followed by atmospheric pressure (AP) and repeated the second HP followed by AP over 14 days. Genomic, biochemical, and histological evaluation were performed to compare the effects of each regimen on the constructs. Results The gene expressions of collagen type II and aggrecan core protein were significantly upregulated with repetitive HP regimens compared with a single HP or AP by 14 days ( P < 0.01 or 0.05). Matrix metalloptoteinase-13 (MMP-13) in AP was upregulated significantly compared to other HP regimens at day 14 ( P < 0.01). No significant difference was observed in tissue inhibitor of metalloproteinases-II. Immunohistology demonstrated that application of HP (both repetitive and single) promoted the accumulation of specific extracellular matrix and reduced a MMP-13. A single regimen of HP followed by AP significantly increased the amount of sulfated glycosaminoglycan than that of the AP, whereas repetitive HP remained similar level of that of the AP. Conclusions Repetitive HP had a greater effect on anabolic activity by chondrocytes than a single HP regimen, which will be advantageous for producing a matrix-rich cell construct.

Bioreactors with hydrostatic pressures imitating physiological environments in intervertebral discs

Intervertebral discs are normally exposed to a variety of loads and stresses but hydrostatic pressure (HP) could be the main biosignal for chondrogenic cell differentiation and maintenance of this tissue. Although there are simple approaches to intermittently expose cell cultures to HP in separate material testing devices, utilization of biomimetic bioreactors aiming to provide in vitro conditions mimicking those found in vivo, attracts special attention. However, design of such bioreactors is complex due to the requirement of high HP magnitudes (up to 3 MPa) applied in different regimes mimicking pressures arising in intervertebral disc during normal daily activities. Furthermore, efficient mass transfer has to be facilitated to cells within 3D scaffolds, and the engineering challenges include avoidance or removal of gas bubbles in the culture medium before pressurization as well as selection of appropriate, biocompatible construction materials and maintenance of sterility during cultivation. Here, we review approaches to induce HP in 2D and 3D cell cultures categorized into 5 groups: (I) discontinuous systems with direct pressurization of the cultivation medium by a piston, (II) discontinuous systems with indirect pressurization by a compression fluid, (III) continuous systems with direct pressurization of the cultivation medium, static culture, (IV) continuous systems with culture perfusion, and (V) systems applying HP in conjunction with other physical signals. Although the complexity is increasing as additional features are added to the systems, the need to understand HP effects on cells and tissues in a physiologically relevant, yet precisely controlled, environment together with current technological advancements are leading towards innovative bioreactor solutions.

Advances in Application of Mechanical Stimuli in Bioreactors for Cartilage Tissue Engineering

Articular cartilage (AC) is the weight-bearing tissue in diarthroses. It lacks the capacity for self-healing once there are injuries or diseases due to its avascularity. With the development of tissue engineering, repairing cartilage defects through transplantation of engineered cartilage that closely matches properties of native cartilage has become a new option for curing cartilage diseases. The main hurdle for clinical application of engineered cartilage is how to develop functional cartilage constructs for mass production in a credible way. Recently, impressive hyaline cartilage that may have the potential to provide capabilities for treating large cartilage lesions in the future has been produced in laboratories. The key to functional cartilage construction in vitro is to identify appropriate mechanical stimuli. First, they should ensure the function of metabolism because mechanical stimuli play the role of blood vessels in the metabolism of AC, for example, acquiring nutrition and removing wastes. Second, they should mimic the movement of synovial joints and produce phenotypically correct tissues to achieve the adaptive development between the micro- and macrostructure and function. In this article, we divide mechanical stimuli into three types according to forces transmitted by different media in bioreactors, namely forces transmitted through the liquid medium, solid medium, or other media, then we review and summarize the research status of bioreactors for cartilage tissue engineering (CTE), mainly focusing on the effects of diverse mechanical stimuli on engineered cartilage. Based on current researches, there are several motion patterns in knee joints; but compression, tension, shear, fluid shear, or hydrostatic pressure each only partially reflects the mechanical condition in vivo. In this study, we propose that rolling-sliding-compression load consists of various stimuli that will represent better mechanical environment in CTE. In addition, engineers often ignore the importance of biochemical factors to the growth and development of engineered cartilage. In our point of view, only by fully considering synergistic effects of mechanical and biochemical factors can we find appropriate culture conditions for functional cartilage constructs. Once again, rolling-sliding-compression load under appropriate biochemical conditions may be conductive to realize the adaptive development between the structure and function of engineered cartilage in vitro.

Hydrostatic pressure-driven three-dimensional cartilage induction using human adipose-derived stem cells and collagen gels

BACKGROUND

The chondrogenic potential of adipose-derived stem cells (ASCs) has been previously demonstrated, although several reports have indicated that ASCs produce less cartilage-specific matrix than bone marrow-derived mesenchymal stem cells. In this study, we intended to improve chondrogenic phenotypes of ASCs using hydrostatic pressure (HP), without utilizing any growth factors other than the transforming growth factor-β1.

METHODS

Human ASCs (CD13(+), 44(+), 90(+), 14(-), 31(-), 34(-)) were harvested and cultured. After three passages, the cells were suspended in 0.3% neutralized collagen type I solution and injected into semipermeable membrane tubes, from which 66 pouches were constructed. After a day of incubation, the 66 pouches were divided into three groups. Group HP1: Pouches were incubated for 1 week with treatment of cyclic HP at 0-0.5 MPa (4.93 atm), 0.5 Hz, with a medium replenishment rate of 0.1 mL/min at 37°C, 3% O2, and 5% CO2 in air using a bioprocessor. This was followed by 3 weeks with no HP and without pouches. Group HP2: Pouches were incubated for the first and third week (2 total weeks) with the same condition of Group HP1. No HP was applied in the second and fourth week. Group AP: Pouches with one end opened were incubated without HP. We evaluated the cell constructs histologically and immunohistochemically, as well as for specific gene expression.

RESULTS

Accumulation of the matrix in the HP1 and HP2 groups was much denser than AP groups, particularly after 2 weeks. Cell numbers in the HP groups increased gradually in the middle zone and peaked at 1 week after incubation, maintaining their numbers for the entire course on the surface layer of the construct. In the genomic study results, COL 2A1, COL 10A1, ACAN, SOX9, MMP3, and MMP13 were upregulated and COL 1A1, ITGB1, and PCNA were downregulated by HP. There were no significant differences between HP1 and HP2 gene expression.

CONCLUSION

It was suggested that HP is especially beneficial in the early stage of chondrogenesis of ASCs. Moreover, the expression profile of genes related to chondrocyte differentiation/proliferation was significantly enhanced by HP loading compared with the AP control.

Off-loading of cyclic hydrostatic pressure promotes production of extracellular matrix by chondrocytes

The addition of cyclic hydrostatic pressure (cHP) to cell culture medium has been used to promote extracellular matrix (ECM) production by articular chondrocytes. Though a combination of cHP followed by atmospheric pressure (AP) has been examined previously, the rationale of such a combination was unclear. We compared the effects of loading once versus twice (combinations of cHP followed by AP) regarding both gene expression and biochemical and histological phenotypes of chondrocytes. Isolated bovine articular chondrocytes were embedded in a collagen gel and incubated for 14 days under conditions combining cHP and AP. The gene expression of aggrecan core protein and collagen type II were upregulated in response to cHP, and those levels were maintained for at least 4 days after cHP treatment. Accumulation of cartilage-specific sulfated glycosaminoglycans following cHP for 7 days and subsequent AP for 7 days was significantly greater than that of the AP control (p < 0.05). Therefore, incubation at AP after loading with cHP was found to beneficially affect ECM accumulation. Manipulating algorithms of cHP combined with AP will be useful in producing autologous chondrocyte-based cell constructs for implantation.