Intake of silica nanoparticles by giant lipid vesicles: influence of particle size and thermodynamic membrane state

Microfluidic Transfection System and Temperature Strongly Influence the Efficiency of Transient Transfection

For the process of transient transfection (TTF), DNA is often transported into the cells using polyplexes. The polyplex uptake and the subsequent transient expression of the gene of interest are of great importance for a successful transfection. In this study, we investigated a 3D-printed microfluidic system designed to facilitate direct TTF for suspension of CHO-K1 cells. The results demonstrate that this system achieves significantly better results than the manual approach. Furthermore, the effect of both post-transfection incubation time (t) and temperature (T) on polyplex uptake was explored in light of the membrane phase transitions. Attention was paid to obtaining the highest possible transfection efficiency (TFE), viability (V), and viable cell concentration (VCC). Our results show that transfection output measured as product of VCC and TFE is optimal for t = 1 h at T = 22 °C. Moreover, post-transfection incubation at T = 22 °C with short periods of increased T at T = 40 °C were observed to further increase the output. Finally, we found that around T = 19 °C, the TFE increases strongly. This is the membrane phase transition T of CHO-K1 cells, and those results therefore suggest a correlation between membrane order and permeability (and in turn, TFE).

Increase in anionic Fe3O4 nanoparticle-induced membrane poration and vesicle deformation due to membrane potential - an experimental study

The membrane potential plays a significant role in various cellular processes while interacting with membrane active agents. So far, all the investigations of the interaction of nanoparticles (NPs) with lipid vesicles have been performed in the absence of membrane potential. In this study, the anionic magnetite NP-induced poration along with deformation of cell-mimetic giant unilamellar vesicles (GUVs) has been studied in the presence of various membrane potentials. Lipids 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DOPG), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), and channel forming protein gramicidin A (GrA) are used to synthesize the DOPG/DOPC/GrA-GUVs. The static and dynamic nature of GUVs is investigated using phase contrast fluorescent microscopy. The presence of GrA in the membrane decreases the leakage constant of the encapsulating fluorescent probe (calcein) in the absence of membrane potential. With the increase of negative membrane potential, the leakage shifts from a single exponential to two exponential functions, obtaining two leakage constants. The leakage became faster at the initial stage, and at the final stage, it became slower with the increase in negative membrane potential. Both the fraction of poration and deformation increase with the increase of negative membrane potential. These results suggested that the membrane potential enhances the NP-induced poration along with the deformation of DOPG/DOPC/GrA-GUVs. The increase of the binding constant in the NPs with membrane potential is one of the important factors for increasing membrane permeation and vesicle deformation.

Novel customized age-dependent corneal membranes and interactions with biodegradable nanoparticles loaded with dexibuprofen

Ocular inflammation is one of the most prevalent diseases in ophthalmology and it is currently treated using eye drops of nonsteroidal antiinflammatory drugs such as dexibuprofen (DXI). However, their bioavailability is low and therefore, PLGA nanoparticles constitute a suitable approach to be administered as eyedrops. Therefore, DXI has been encapsulated into PLGA nanoparticles (DXI-NPs). Although the eye, and specifically the cornea, suffers from age-related changes in its composition, current medications are not focused on these variations. Therefore, to elucidate the interaction mechanism of DXI-NPs with the cornea in relation with age, two different corneal membrane models have been developed (corresponding to adult and elder population) using lipid monolayers, large and giant unilamellar vesicles. Interactions of both DXI and DXI-NPs were studied with these models by means of Langmuir balance technique, dipole potential, anisotropy and confocal microscopy. In addition, fluorescently labelled nanoparticles were administered to mice in order to corroborate these data obtained in vitro. It was observed that DXI-NPs interact with lipid membranes through an adhesion process, mainly in the rigid regions and afterwards DXI-NPs are internalized by a wrapping process. Furthermore, differences on the dipole potential caused by DXI-NPs in each corneal membrane have been obtained due to the increase of membrane rigidity on the ECMM. Additionally, it can be confirmed that DXI-NPs adhere to L_o phase and also inside the lipid membrane. Finally, in vitro and in vivo results corroborate that DXI-NPs are adhered to the more ordered phase. Finally, differences between interactions of DXI-NPs with the elder and adult corneal tissue were observed.

Biomimetic Curvature and Tension-Driven Membrane Fusion Induced by Silica Nanoparticles

Fusion events in living cells are intricate phenomena that require the coordinate action of multicomponent protein complexes. However, simpler synthetic tools to control membrane fusion in artificial cells are highly desirable. Native membrane fusion machinery mediates fusion, driving a delicate balance of membrane curvature and tension between two closely apposed membranes. Here, we show that silica nanoparticles (SiO₂ NPs) at a size close to the cross-over between tension-driven and curvature-driven interaction regimes initiate efficient fusion of biomimetic model membranes. Fusion efficiency and mechanisms are studied by Förster resonance energy transfer and confocal fluorescence microscopy. SiO₂ NPs induce a slight increase in lipid packing likely to increase the lateral tension of the membrane. We observe a connection between membrane tension and fusion efficiency. Finally, real-time confocal fluorescence microscopy reveals three distinct mechanistic pathways for membrane fusion. SiO₂ NPs show significant potential for inclusion in the synthetic biology toolkit for membrane remodeling and fusion in artificial cells.

Broad lipid phase transitions in mammalian cell membranes measured by Laurdan fluorescence spectroscopy

Employing fluorescence spectroscopy and the membrane-embedded dye Laurdan we experimentally show that linear changes of cell membrane order in the physiological temperature regime are part of broad order-disorder-phase transitions which extend over a much broader temperature range. Even though these extreme temperatures are usually not object of live science research due to failure of cellular functions, our findings help to understand and predict cell membrane properties under physiological conditions as they explain the underlying physics of a broad order-disorder phase transition. Therefore, we analyzed the membranes of various cell lines, red blood cell ghosts and lipid vesicles by spectral decomposition in a custom-made setup in a temperature range from -40 °C to +90 °C. While the generalized polarization as a measure for membrane order of artificial lipid membranes like phosphatidylcholine show sharp transitions as known from calorimetry measurements, living cells in a physiological temperature range do only show linear changes. However, extending the temperature range shows the existence of broad transitions and their sensitivity to cholesterol content, pH and anaesthetic. Moreover, adaptation to culture conditions like decreased temperature and morphological changes like detachment of adherent cells or dendrite growth are accompanied by changes in membrane order as well. The observed changes of the generalized polarization are equivalent to temperature changes dT in the range of +12 K < dT < -6 K.

Characterizing the Structure and Interactions of Model Lipid Membranes Using Electrophysiology

The cell membrane is a protective barrier whose configuration determines the exchange both between intracellular and extracellular regions and within the cell itself. Consequently, characterizing membrane properties and interactions is essential for advancements in topics such as limiting nanoparticle cytotoxicity. Characterization is often accomplished by recreating model membranes that approximate the structure of cellular membranes in a controlled environment, formed using self-assembly principles. The selected method for membrane creation influences the properties of the membrane assembly, including their response to electric fields used for characterizing transmembrane exchanges. When these self-assembled model membranes are combined with electrophysiology, it is possible to exploit their non-physiological mechanics to enable additional measurements of membrane interactions and phenomena. This review describes several common model membranes including liposomes, pore-spanning membranes, solid supported membranes, and emulsion-based membranes, emphasizing their varying structure due to the selected mode of production. Next, electrophysiology techniques that exploit these structures are discussed, including conductance measurements, electrowetting and electrocompression analysis, and electroimpedance spectroscopy. The focus of this review is linking each membrane assembly technique to the properties of the resulting membrane, discussing how these properties enable alternative electrophysiological approaches to measuring membrane characteristics and interactions.

Stimuli-responsive flexible Lewis pair-modified nanoparticles for fluorescence imaging

A stimuli-responsive fluorophore, encompassing a Lewis acid-base pair, binds to primary amines on mesoporous silica nanoparticles, which may serve as environment-sensitive drug carriers. The fluorophore switches conformation, exhibiting different emission color and lifetimes, allowing for the detection of the water content of the nanoparticles' surroundings through fluorescence spectroscopy and microscopy.

A closer look into the physical interactions between lipid membranes and layered double hydroxide nanoparticles

Layered double hydroxide nanoparticles (LDH-NPs) constitute promising nanocarriers for drug and gene delivery. Although their cell internalization has been studied, the interaction between LDH-NPs and biological membrane models, such as giant unilamellar vesicles (GUVs), remains unexplored. These vesicles are widely-used membrane models that allow minimizing the complexity and uncertainty associated with biological systems to study the physical interactions in the absence of cell metabolism effects. With such an approach the physicochemical properties of the membrane can be differentiated from the biological functionalities involved in cell internalization and the membrane-mediated internalization can be directly understood. In this work, we describe for the first time the interaction of LDH-NPs with freestanding negatively charged POPC:POPS GUVs by fluorescence microscopy. The experiments were performed with fluorescein labeled LDH-NPs of about 100 nm together with different fluorophores in order to evaluate the NPs interactions with the vesicles as well as their impact on the membrane morphology and permeability. Positively charged LDH-NPs are electrostatically accumulated at the GUVs membrane, altering its lateral phospholipid distribution and increasing the stiffness and permeability of the membrane. The adsorption of albumin (LDH@ALB) or polyacrylic acid (LDH@PA) passivates the surface of LDH-NPs eliminating long-range electrostatic attraction. The absence of membrane-mediated internalization of either LDH@ALB or LDH@PA, represents an advantage in the use of LDH-NPs as drug or nucleic acids nanocarriers, because suitable functionalization will allow an optimal cell targeting.

Fission of Lipid-Vesicles by Membrane Phase Transitions in Thermal Convection

Unilamellar lipid vesicles can serve as model for protocells. We present a vesicle fission mechanism in a thermal gradient under flow in a convection chamber, where vesicles cycle cold and hot regions periodically. Crucial to obtain fission of the vesicles in this scenario is a temperature-induced membrane phase transition that vesicles experience multiple times. We model the temperature gradient of the chamber with a capillary to study single vesicles on their way through the temperature gradient in an external field of shear forces. Starting in the gel-like phase the spherical vesicles are heated above their main melting temperature resulting in a dumbbell-deformation. Further downstream a temperature drop below the transition temperature induces splitting of the vesicles without further physical or chemical intervention. This mechanism also holds for less cooperative systems, as shown here for a lipid alloy with a broad transition temperature width of 8 K. We find a critical tether length that can be understood from the transition width and the locally applied temperature gradient. This combination of a temperature-induced membrane phase transition and realistic flow scenarios as given e.g. in a white smoker enable a fission mechanism that can contribute to the understanding of more advanced protocell cycles.

Membrane-Mimetic Dendrimersomes Engulf Living Bacteria via Endocytosis

There is much interest in developing vesicular microcompartments from natural and synthetic amphiphiles, enabling programmable interactions with living matter. Of particular interest is the development of vesicles capable of endocytosis of living bacteria. Despite the complexity of this process, theoretical studies predict that the endocytosis of prolate micro-objects is possible without the need of active cell machinery if the energy released upon bacterial adhesion to the membrane surpasses the energy required to bend the membrane. Nonetheless, natural liposomes and synthetic polymersomes fail to sufficiently recapitulate membrane properties to perform this advanced function. Here we report the engulfment of living bacteria into endosomes by cell-like dendrimersomes assembled from Janus dendrimers. Full engulfment occurred in less than a minute after contact. The process is driven by the adhesion of the bacterium to the dendrimersome's membrane by ultraweak interactions, comparable to those utilized by nature. The key to success relies on the combination of high flexibility and stability of the dendrimersomes. The key properties of the dendrimersomes are programmed into the molecular structures of their building blocks. The ability to support endocytosis highlights opportunities for the design and programming of dendrimersomes in biomedical research.

Size-dependent uptake of electrically neutral amphipathic polymeric nanoparticles by cell-sized liposomes and an insight into their internalization mechanism in living cells

The size-dependent uptake of amphipathic uncharged-nanoparticles in cell-sized liposomes is emerging as a new insight into their internalization mechanism in living cells.

Interactions between Food Additive Silica Nanoparticles and Food Matrices

Nanoparticles (NPs) have been widely utilized in the food industry as additives with their beneficial characteristics, such as improving sensory property and processing suitability, enhancing functional and nutritional values, and extending shelf-life of foods. Silica is used as an anti-caking agent to improve flow property of powered ingredients and as a carrier for flavors or active compounds in food. Along with the rapid development of nanotechnology, the sizes of silica fall into nanoscale, thereby raising concerns about the potential toxicity of nano-sized silica materials. There have been a number of studies carried out to investigate possible adverse effects of NPs on the gastrointestinal tract. The interactions between NPs and surrounding food matrices should be also taken into account since the interactions can affect their bioavailability, efficacy, and toxicity. In the present study, we investigated the interactions between food additive silica NPs and food matrices, such as saccharides, proteins, lipids, and minerals. Quantitative analysis was performed to determine food component-NP corona using HPLC, fluorescence quenching, GC-MS, and ICP-AES. The results demonstrate that zeta potential and hydrodynamic radius of silica NPs changed in the presence of all food matrices, but their solubility was not affected. However, quantitative analysis on the interactions revealed that a small portion of food matrices interacted with silica NPs and the interactions were highly dependent on the type of food component. Moreover, minor nutrients could also affect the interactions, as evidenced by higher NP interaction with honey rather than with a simple sugar mixture containing an equivalent amount of fructose, glucose, sucrose, and maltose. These findings provide fundamental information to extend our understanding about the interactions between silica NPs and food components and to predict the interaction effect on the safety aspects of food-grade NPs.

Uniform and Janus-like nanoparticles in contact with vesicles: energy landscapes and curvature-induced forces

Biological membranes and lipid vesicles often display complex shapes with non-uniform membrane curvature. When adhesive nanoparticles with chemically uniform surfaces come into contact with such membranes, they exhibit four different engulfment regimes as recently shown by a systematic stability analysis. Depending on the local curvature of the membrane, the particles either remain free, become partially or completely engulfed by the membrane, or display bistability between free and completely engulfed states. Here, we go beyond stability analysis and develop an analytical theory to leading order in the ratio of particle-to-vesicle size. This theory allows us to determine the local and global energy landscapes of uniform nanoparticles that are attracted towards membranes and vesicles. While the local energy landscape depends only on the local curvature of the vesicle membrane and not on the overall membrane shape, the global energy landscape describes the variation of the equilibrium state of the particle as it probes different points along the membrane surface. In particular, we find that the binding energy of a partially engulfed particle depends on the 'unperturbed' local curvature of the membrane in the absence of the particle. This curvature dependence leads to local forces that pull the partially engulfed particles towards membrane segments with lower and higher mean curvature if the particles originate from the exterior and interior solution, respectively, corresponding to endo- and exocytosis. Thus, for partial engulfment, endocytic particles undergo biased diffusion towards the membrane segments with the lowest membrane curvature, whereas exocytic particles move towards segments with the highest curvature. The curvature-induced forces are also effective for Janus particles with one adhesive and one non-adhesive surface domain. In fact, Janus particles with a strongly adhesive surface domain are always partially engulfed which implies that they provide convenient probes for experimental studies of the curvature-induced forces that arise for complex-shaped membranes.

Stabilization of membrane necks by adhesive particles, substrate surfaces, and constriction forces

Membrane remodelling processes involving the formation and fission of small buds require the formation and closure of narrow membrane necks, both for biological membranes and for model membranes such as lipid bilayers. The conditions required for the stability of such necks are well understood in the context of budding of vesicles with bilayer asymmetry and/or intramembrane domains. In many cases, however, the necks form in the presence of an adhesive surface, such as a solid particle or substrate, or the cellular cortex itself. Examples of such processes in biological cells include endocytosis, exocytosis and phagocytosis of solid particles, the formation of extracellular and outer membrane vesicles by eukaryotic and prokaryotic cells, as well as the closure of the cleavage furrow in cytokinesis. Here, we study the interplay of curvature elasticity, membrane-substrate adhesion, and constriction forces to obtain generalized stability conditions for closed necks which we validate by numerical energy minimization. We then explore the consequences of these stability conditions in several experimentally accessible systems such as particle-filled membrane tubes, supported lipid bilayers, giant plasma membrane vesicles, bacterial outer membrane vesicles, and contractile rings around necks. At the end, we introduce an intrinsic engulfment force that directly describes the interplay between curvature elasticity and membrane-substrate adhesion.

Targeted hepatocellular carcinoma therapy: transferrin modified, self-assembled polymeric nanomedicine for co-delivery of cisplatin and doxorubicin

BACKGROUND

Targeted hepatocellular carcinoma (HCC) therapy was carried out to improve the efficacy of liver cancers. The aim of this study was to develop transferrin (Tf) modified, self-assembled polymeric nanoparticles for co-delivery doxorubicin (DOX) and cisplatin (DDP), to achieve combination tumor therapy.

METHODS

Tf modified polyethylene glycol (PEG) containing DOX prodrug (Tf-PEG-DOX) was synthesized. DDP containing poly(lactic-co-glycolic) acid (PLGA) materials (PLGA-DDP) were prepared. Tf modified DOX and DDP loaded PLGA nanoparticles (Tf-DOX/DDP NPs) were prepared by using nanoprecipitation method. The particles sizes, zeta potentials, drug loading effects were characterized. The cytotoxicity of the NPs was evaluated in human hepatoma carcinoma cell lines (HepG2 cells), and in vivo anti-tumor was observed in mice bearing human HepG2 cells model.

RESULTS

Tf-DOX/DDP NPs displayed higher cytotoxicity and enhanced antitumor activity both in vitro and in vivo over their non-modified and single drug loaded counterparts.

CONCLUSION

Tf-DOX/DDP NPs can achieve outstanding anti-tumor activity due to the combination effect of two drugs and the active targeting ability of Tf ligands. The self-assembled polymeric nanomedicine could act as an efficient therapy method for HCC treatment.

The relevance of membrane models to understand nanoparticles-cell membrane interactions

Over the past two decades, numerous types of nanoparticles (NPs) have been developed for medical applications; however only a few nanomedicines are actually available on the market. One reason is the lack of understanding and data concerning the NP fate and their behavior upon contact with biological media and cell membranes. Biomimetic membrane models are interesting tools to approach and understand NPs-cell membrane interactions. The use of these models permits one to control physical and chemical parameters and to rapidly compare membrane types and the influence of different media conditions. The interactions between NPs and cell membranes can be qualified and quantified using analytical and modeling methods. In this review, the major studies concerning NPs-cell membrane models and associated methods are described. The advantages and drawbacks for each method are compared for the different models. The key mechanisms of interactions between NPs and cell membranes are revealed using cell membrane models and are interrogated in comparison with the NP behavior in cellulo or in vivo. Investigating the interactions between NPs and cell membrane models is now proposed as an intermediate step between physicochemical characterization of NPs and biological assays.

Adhesive Nanoparticles as Local Probes of Membrane Curvature

Biological and biomimetic membranes display complex shapes with nonuniform curvature. Because the interaction of adhesive nanoparticles with such membranes depends on the local membrane curvature, different segments of the same membrane can differ in their engulfment behavior. For a single vesicle in contact with many nanoparticles, we predict ten distinct engulfment patterns as well as morphological transitions between these patterns, which are directly accessible to experiment.