Development of adsorptive membranes by confinement of activated biochar into electrospun nanofibers

Preliminary Investigation of Possible Biochar Use as Carbon Source in Polyacrylonitrile Electrospun Fiber Production

Electrospinning with consequent thermal treatment consists in a carbon fiber production method that spins a polymer solution to create fibers with diameters around a few hundred nanometers. The thermal treatments are used for the cyclization and then carbonization of the material at 1700 °C for one hour. The unique structure of micro- and nano-carbon fibers makes them a promising material for various applications ranging from future battery designs to filtration. This work investigated the possibility of using milled gasification biochar, derived from a 20 kW fixed-bed gasifier fueled with vine pruning pellets, as an addictive in the preparation of electrospinning solutions. This study outlined that solvent cleaning and the consequent wet-milling and 32 µm sifting are fundamental passages for biochar preparation. Four different polyacrylonitrile-biochar shares were tested ranging from pure polymer to 50–50% solutions. The resulting fibers were analyzed via scanning electron microscopy, and energy-dispersive X-ray and infrared spectroscopy. Results from the morphological analysis showed that biochar grains dispersed themselves well among the fiber mat in all the proposed shares. All the tested solutions, once carbonized, exceeded 97%wt. of carbon content. At higher carbonization temperatures, the inorganic compounds naturally showing in biochar such as potassium and calcium disappeared, resulting in an almost carbon-pure fiber matrix with biochar grains in between.

Degradation of chlortetracycline using immobilized laccase on Polyacrylonitrile-biochar composite nanofibrous membrane

The continuous release of antibiotic compounds through wastewater effluent into environment has raised concerns about their potential problems for different organisms. Enzymatic degradation with laccase is a green option for removal of pharmaceutical compounds from aqueous media. In this study, laccase was immobilized onto homemade Polyacrylonitrile-biochar composite nanofibrous membrane and the obtained biocatalyst was employed for removal of chlortetracycline, a widely used antibiotic, from aqueous media in continuous mode. The results showed that the immobilized laccase has improved storage, temperature and pH stability compared to free laccase. Also, it retained more than 50% of its initial activity after 7cycles of ABTS oxidation which indicated improved enzyme reusability. Finally, while using immobilized laccase for degradation of chlortetracycline in continuous mode exhibited 58.3%, 40.7% and 22.6% chlortetracycline removal efficiency at flux rates of 1, 2 and 3mL/h∙cm².