Efficient CO2 capture by tertiary amine-functionalized ionic liquids through Li(+)-stabilized zwitterionic adduct formation

Tuning Functionalized Ionic Liquids for CO2 Capture

The increasing concentration of CO₂ in the atmosphere is related to global climate change. Carbon capture, utilization, and storage (CCUS) is an important technology to reduce CO₂ emissions and to deal with global climate change. The development of new materials and technologies for efficient CO₂ capture has received increasing attention among global researchers. Ionic liquids (ILs), especially functionalized ILs, with such unique properties as almost no vapor pressure, thermal- and chemical-stability, non-flammability, and tunable properties, have been used in CCUS with great interest. This paper focuses on the development of functionalized ILs for CO₂ capture in the past decade (2012~2022). Functionalized ILs, or task-specific ILs, are ILs with active sites on cations or/and anions. The main contents include three parts: cation-functionalized ILs, anion-functionalized ILs, and cation-anion dual-functionalized ILs for CO₂ capture. In addition, classification, structures, and synthesis of functionalized ILs are also summarized. Finally, future directions, concerns, and prospects for functionalized ILs in CCUS are discussed. This review is beneficial for researchers to obtain an overall understanding of CO₂-philic ILs. This work will open a door to develop novel IL-based solvents and materials for the capture and separation of other gases, such as SO₂, H₂S, NOx, NH₃, and so on.

Inverse molecular design of alkoxides and phenoxides for aqueous direct air capture of CO2

Aqueous direct air capture (DAC) is a key technology toward a carbon negative infrastructure. Developing sorbent molecules with water and oxygen tolerance and high CO₂ binding capacity is therefore highly desired. We analyze the CO₂ absorption chemistries on amines, alkoxides, and phenoxides with density functional theory calculations, and perform inverse molecular design of the optimal sorbent. The alkoxides and phenoxides are found to be more suitable for aqueous DAC than amines thanks to their water tolerance (lower pK_a prevents protonation by water) and capture stoichiometry of 1:1 (2:1 for amines). All three molecular systems are found to generally obey the same linear scaling relationship (LSR) between [Formula: see text] and [Formula: see text], since both CO₂ and proton are bonded to the nucleophilic (alkoxy or amine) binding site through a majorly [Formula: see text] bonding orbital. Several high-performance alkoxides are proposed from the computational screening. Phenoxides have comparatively poorer correlation between [Formula: see text] and [Formula: see text], showing promise for optimization. We apply a genetic algorithm to search the chemical space of substituted phenoxides for the optimal sorbent. Several promising off-LSR candidates are discovered. The most promising one features bulky ortho substituents forcing the CO₂ adduct into a perpendicular configuration with respect to the aromatic ring. In this configuration, the phenoxide binds CO₂ and a proton using different molecular orbitals, thereby decoupling the [Formula: see text] and [Formula: see text]. The [Formula: see text] trend and off-LSR behaviors are then confirmed by experiments, validating the inverse molecular design framework. This work not only extensively studies the chemistry of the aqueous DAC, but also presents a transferrable computational workflow for understanding and optimization of other functional molecules.

CO2 Capture and in situ Catalytic Transformation

The escalating rate of fossil fuel combustion contributes to excessive CO₂ emission and the resulting global climate change has drawn considerable attention. Therefore, tremendous efforts have been devoted to mitigate the CO₂ accumulation in the atmosphere. Carbon capture and storage (CCS) strategy has been regarded as one of the promising options for controlling CO₂ build-up. However, desorption and compression of CO₂ need extra energy input. To circumvent this energy issue, carbon capture and utilization (CCU) strategy has been proposed whereby CO₂ can be captured and in situ activated simultaneously to participate in the subsequent conversion under mild conditions, offering valuable compounds. As an alternative to CCS, the CCU has attracted much concern. Although various absorbents have been developed for the CCU strategy, the direct, in situ chemical conversion of the captured CO₂ into valuable chemicals remains in its infancies compared with the gaseous CO₂ conversion. This review summarizes the recent progress on CO₂ capture and in situ catalytic transformation. The contents are introduced according to the absorbent types, in which different reaction type is involved and the transformation mechanism of the captured CO₂ and the role of the absorbent in the conversion are especially elucidated. We hope this review can shed light on the transformation of the captured CO₂ and arouse broad concern on the CCU strategy.

The role of cations in the interactions between anionic N-heterocycles and SO2

Our study shows that cation plays a more important role in the interactions between anionic N-heterocycles and SO2 than in the NHC-CO2 case. The adducts of NHC, SO2 and cation often exhibit multiple stable configurations with close energies rather than the only reported "CO2-sandwiched" planar NHC-CO2-cation structure. The structural diversity makes the models omitting cation inappropriate for predicting the SO2 capture products, which also leads to less clear trends of the cation effects than those observed in the CO2 case. The detailed cation effects are discussed in the text.

Reactivity of Lithium β-Ketocarboxylates: The Role of Lithium Salts

Lithium β-ketocarboxylates 1(COOLi), prepared by the reaction of lithium enolates 2(Li⁺) with carbon dioxide, readily undergo decarboxylative disproportionation in THF solution unless in the presence of lithium salts, in which case they are indefinitely stable at room temperature in inert atmosphere. The availability of stable THF solutions of lithium β-ketocarboxylates 1(COOLi) in the absence of carbon dioxide allowed reactions to take place with nitrogen bases and alkyl halides 3 to give α-alkyl ketones 1(R) after acidic hydrolysis. The sequence thus represents the use of carbon dioxide as a removable directing group for the selective monoalkylation of lithium enolates 2(Li⁺). The roles of lithium salts in preventing the disproportionation of lithium β-ketocarboxylates 1(COOLi) and in determining the course of the reaction with bases and alkyl halides 3 are discussed.

Poly(ethylene glycol)s as Ligands in Calcium-Catalyzed Cyclic Carbonate Synthesis

Herein the use of CaI₂ in combination with poly(ethylene glycol) dimethyl ether (PEG DME 500) as an efficient catalyst system for the addition of CO₂ to epoxides is reported. This protocol is based on a nontoxic and abundant metal in conjunction with a polymeric ligand. Fifteen terminal epoxides were converted at room temperature to give the desired products in yields up to 99 %. Notably, this system was also effective for the synthesis of twelve challenging internal carbonates in yields up to 98 %.

Active chemisorption sites in functionalized ionic liquids for carbon capture

Carbon capture with site-containing ionic liquids is reviewed with particular attention on the activation and design of the interaction sites.

Ionic liquids derived from organosuperbases: en route to superionic liquids

This is a comprehensive review of various task-specific ionic liquids derived from TMG, TBD, DBU, DBN and other organosuperbases.

Efficient fixation and conversion of CO2 into dimethyl carbonate catalyzed by an imidazolium containing tri-cationic ionic liquid/super base system

The synthesis route used to prepare dimethyl carbonate from CO₂ and methanol is a most attractive route from a green chemistry point of view.

CO2 adsorption on diatomaceous earth modified with cetyltrimethylammonium bromide and functionalized with tetraethylenepentamine: Optimization and kinetics

The carbon dioxide (CO2) adsorbent diatomaceous earth (DE) was modified with cetyltrimethylammonium bromide (CTAB) and functionalized with varying levels of tetraethylenepentamine (TEPA). The CO2 absorption at atmospheric pressure was optimized by varying the TEPA-loading level (0-40% (w/w)), operating temperature (40-80 °C) and water vapor concentration (0-16% (v/v)) in a 10% (v/v) CO2 feed stream in helium balance using a full 2(3) factorial design. The TEPA/CTAB-DE adsorbents were characterized by X-ray diffractometry, Fourier transform infrared spectrometry and thermogravimetric analyses. The CO2 adsorption capacity increased as each of these three factors increased. The TEPA loading level-water concentration interaction had a positive influence on the CO2 adsorption while the operating temperature-water concentration interaction was antagonistic. The optimal condition for CO2 adsorption on 40%TEPA/CTAB-DE, evaluated via a factorial design response surface method (RSM), was a temperature of 58-68 °C and a water vapor concentration of 9.5-14% (v/v), with a maximum CO2 adsorption capacity of 149.4 mg g(-1) at 63.5 °C and 12% (v/v) water vapor concentration in the feed. Validation and sensitivity tests revealed that the estimated CO2 adsorption capacity was within ±4% of the experimental values, suggesting that the RSM model was satisfied and acceptable. From three kinetic models (pseudo-first-order, pseudo-second-order model and Avrami's equation), assessed using an error function (Err) and the coefficient of determination (R(2)), Avrami's equation was the most appropriate to describe the kinetics of CO2 adsorption on the 40%TEPA/CTAB-DE adsorbent and suggested that more than one reaction pathway occurred in the CO2 adsorption.

Cation-assisted interactions between N-heterocycles and CO2

Interactions between CO₂ and N-heterocycles are greatly enhanced by divalent cations.