Human osteoclasts/osteoblasts 3D dynamic co‑culture system to study the beneficial effects of glucosamine on bone microenvironment

Semi-rational engineering of glucosamine-6-phosphate deaminase for catalytic synthesis of glucosamine from D-fructose

Glucosamine (GlcN), as one of the important derivatives of D-glucose, is formed by the substitution of the hydroxyl group at position 2 of glucose with an amino group. As a bioactive amino monosaccharide, GlcN is known for its various biological effects, including immune enhancement, antioxidant, anti-inflammatory, hepatoprotective, joint pain relief, and alleviation of osteoporosis. These properties highlight the broad applications of GlcN and its derivatives in pharmaceuticals, cosmetics, food production, and other fields, underscoring their promising prospects. Thus, the efficient industrial production of GlcN is gaining increasing attention as well. Here, we report a novel biosynthetic method for GlcN, utilizing engineered Escherichia coli expressing glucosamine-6-phosphate deaminase (GlmD) to directly convert D-fructose into GlcN. The best mutant screened using the Morgan-Elson colorimetric method is the triple mutant G42S/G43C/G136T (designated as GlmD-ZH11), which exhibits approximately 21 times higher catalytic activity towards D-fructose compared to the wild type. Using the purified enzyme of GlmD-ZH11 in shaken flask fermentation for six hours, we achieved a conversion rate of 72.11 % from D-fructose to GlcN. To further elucidate the mechanism behind the enhanced activity of the GlmD-ZH11 mutant, we conducted hydrogen bond network analysis to investigate the hydrogen bond interactions between the mutant and fructose. Additionally, we performed molecular dynamics simulations to study the RMSD and RMSF curves of the mutant. The results indicate that the protein structure of the mutant ZH11 is more stable and binds more tightly to the substrate. Calculations of the solvent-accessible surface area and binding free energy suggested that Thr41, Ser42, Asp72, Gly137, and Ala145 may be key amino acid residues in the catalytic process of ZH11. Finally, based on these findings and the catalytic mechanism of the wild type, we hypothesized a potential catalytic reaction mechanism for the ZH11 mutant.

Adipose-Derived Stromal Cell Conditioned Medium on Bone Remodeling: Insights from a 3D Osteoblast-Osteoclast Co-Culture Model

This study describes the potential of the conditioned medium (CM) from adipose-derived mesenchymal stromal cells (ASCs) to affect the response of bone cells and support bone remodeling. This was in particular assessed by an in vitro model represented by a 3D human osteoblast-osteoclast co-culture. It has been reported that the effects of ASCs are predominantly attributable to the paracrine effects of their secreted factors, that are present as soluble factors or loaded into extracellular vesicles. They may affect various biological processes, including bone turnover. Our interest was to provide further evidence to support ASC-CM as a promising cell-free therapeutic agent for the treatment of bone loss. ASC-CM was characterized using nanoparticle tracking analysis (NTA), cytofluorimetry, and proteomic analysis. Human osteoblasts (hOBs) from vertebral lamina were cultured with monocytes, as osteoclasts (hOCs) precursors, in a Rotary cell culture system for 14 days. Histochemical analysis was performed to evaluate the effect of ASC-CM on bone-specific markers such as tartrate-resistant acid phosphatase (TRAP), osteopontin (OPN), RUNX2, Collagen 1 (COL1), and mineral matrix. ASC-CM characterization confirmed the content of CD63/CD81/CD9 positive extracellular vesicles. Proteomic dataset considering bone-remodeling-related keywords identified 16 processes significantly enriched. The exposure of hOBs/hOCs aggregates to ASC-CM induced increase of OPN, COL I, and RUNX2, and significantly induced mineral matrix deposition, while significantly reducing TRAP expression. These data demonstrated that CM from ASCs contains a complex of secreted factors able to control either bone resorption or bone formation and requires further investigations to deeply analyze their potential therapeutic effects.

Advancing bone regeneration: Unveiling the potential of 3D cell models in the evaluation of bone regenerative materials

Bone, a rigid yet regenerative tissue, has garnered extensive attention for its impressive healing abilities. Despite advancements in understanding bone repair and creating treatments for bone injuries, handling nonunions and large defects remains a major challenge in orthopedics. The rise of bone regenerative materials is transforming the approach to bone repair, offering innovative solutions for nonunions and significant defects, and thus reshaping orthopedic care. Evaluating these materials effectively is key to advancing bone tissue regeneration, especially in difficult healing scenarios, making it a critical research area. Traditional evaluation methods, including two-dimensional cell models and animal models, have limitations in predicting accurately. This has led to exploring alternative methods, like 3D cell models, which provide fresh perspectives for assessing bone materials' regenerative potential. This paper discusses various techniques for constructing 3D cell models, their pros and cons, and crucial factors to consider when using these models to evaluate bone regenerative materials. We also highlight the significance of 3D cell models in the in vitro assessments of these materials, discuss their current drawbacks and limitations, and suggest future research directions. STATEMENT OF SIGNIFICANCE: This work addresses the challenge of evaluating bone regenerative materials (BRMs) crucial for bone tissue engineering. It explores the emerging role of 3D cell models as superior alternatives to traditional methods for assessing these materials. By dissecting the construction, key factors of evaluating, advantages, limitations, and practical considerations of 3D cell models, the paper elucidates their significance in overcoming current evaluation method shortcomings. It highlights how these models offer a more physiologically relevant and ethically preferable platform for the precise assessment of BRMs. This contribution is particularly significant for "Acta Biomaterialia" readership, as it not only synthesizes current knowledge but also propels the discourse forward in the search for advanced solutions in bone tissue engineering and regeneration.

In Vitro Coculture of Primary Human Cells to Analyze Angiogenesis, Osteogenesis, and the Inflammatory Response to Newly Developed Osteosynthesis Material for Pediatric Maxillofacial Traumatology: A Potential Pretesting Model before In Vivo Experiments

During the present study, an in vitro coculture bone tissue mimic based on primary osteoblasts and primary endothelial cells was used for a complex and broad evaluation of a newly developed material for applications in pediatric maxillofacial traumatology. The biomaterial was composed of PDLLA (poly(D,L-lactide)) in various combinations with calcium carbonate (CC), magnesium (Mg), and chitosan (CH). Besides classical biocompatibility analyses, the present study evaluated material-dependent effects on fundamental processes that are essential for successful material integration and regeneration. Therefore, inflammation-associated factors such as E-selectin and interleukins were analyzed in the in vitro model system on gene expression and protein level depending on the different materials. Furthermore, in order to test the capability of vascularization of the material, the effect of the different materials on the formation of microvessel-like structures as well as the expression and release of proangiogenic factors was investigated in vitro in the bone coculture model. In addition, the mineralization capacity as well as the relative gene expression of osteogenic differentiation factors was analyzed in response to the different materials. As a result, the authors could assess the material combination PDLLA: CC CH as the most functionally tested material with regard to biocompatibility, inflammatory response, and microvessel-like structure formation as well as osteogenic differentiation in the in vitro coculture system. In conclusion, by using tissue-engineered human bone tissue equivalents as proposed here in an in vitro coculture model, biomaterial-mediated effects can be readily investigated. Moreover, it is proposed that these complex in vitro evaluations could contribute to the understanding and improvement of the development of novel materials for pediatric traumatological care for prospective clinical applications.

O-GlcNAcylation drives calcium signaling toward osteoblast differentiation: A bioinformatics-oriented study

This study aimed to reveal the possible mechanisms by which O-linked-N-acetylglucosaminylation (O-GlcNAcylation) regulates osteoblast differentiation using a series of bioinformatics-oriented experiments. To examine the influence of O-GlcNAcylation levels on osteoblast differentiation, osteoblastic MC3T3-E1 cells were treated with O-GlcNAc transferase (OGT) and O-GlcNAcase (OGA) inhibitors. Correlations between the levels of O-GlcNAcylation and the expression of osteogenic markers as well as OGT were evaluated by qPCR and western blotting. The O-GlcNAcylated proteins assumed to correlate with Runx2 expression were retrieved from several public databases and used for further bioinformatics analysis. Following the findings of the bioinformatics analysis, intracellular calcium ([Ca²⁺ ]_i ) was monitored in the cells treated with OGT and OGA inhibitors using a confocal laser-scanning microscope (CLS). The interaction effect between O-GlcNAcylation and [Ca²⁺ ]_i on osteogenic marker expression was determined using stable OGT knockdown MC3T3-E1 cells. O-GlcNAcylation was positively associated with osteoblast differentiation. The time-course profile of global O-GlcNAcylated proteins showed a distinctive pattern with different molecular weights during osteoblast differentiation. The expression pattern of several O-GlcNAcylated proteins was significantly similar to that of Runx2 expression. Bioinformatic analysis of the retrieved Runx2-related-O-GlcNAcylated-proteins revealed the importance of [Ca²⁺ ]_i . CLS showed that alteration of O-GlcNAcylation rapidly changed [Ca²⁺ ]_i in MC3T3-E1 cells. O-GlcNAcylation and [Ca²⁺ ]_i showed an interaction effect on the expression of osteogenic markers. OGT knockdown disrupted the [Ca²⁺ ]_i -induced expression changes of osteogenic markers. O-GlcNAcylation interacts with [Ca²⁺ ]_i and elicits osteoblast differentiation by regulating the expression of osteogenic markers.

miR-486-3p regulates CyclinD1 and promotes fluoride-induced osteoblast proliferation and activation

Fluoride is a persistent environmental pollutant, and its excessive intake contributes to skeletal and dental fluorosis. The mechanisms underlying fluoride-induced abnormal osteoblast proliferation and activation, which are related to skeletal fluorosis, have not yet been fully clarified. As important epigenetic regulators, microRNAs (miRNAs) participate in bone metabolism. On the basis of our previous miRNA-seq results and bioinformatics analysis, this study investigated the role and specific molecular mechanism of miR-486-3p in fluoride-induced osteoblast proliferation and activation via CyclinD1. Herein, in the fluoride-challenged population, we observed that miR-486-3p expression decreased while CyclinD1 and transforming growth factor (TGF)-β1 increased, and miR-486-3p level correlated negatively with the expression of CyclinD1 and TGF-β1 genes. Further, we verified that sodium fluoride (NaF) decreases miR-486-3p expression in human osteoblasts and overexpression of miR-486-3p reduces fluoride-induced osteoblast proliferation and activation. Meanwhile, we demonstrated that miR-486-3p regulates NaF-induced upregulation of CyclinD1 by directly targeting its 3'-untranslated region (3'-UTR). In addition, we observed that NaF activates the TGF-β1/Smad2/3/CyclinD1 axis and miR-486-3p mediates transcriptional regulation of CyclinD1 by TGF-β1/Smad2/3 signaling pathway via targeting TGF-β1 3'-UTR in vitro. This study, thus, contributes significantly in revealing the mechanism of miR-486-3p-mediated CyclinD1 upregulation in skeletal fluorosis and sheds new light on endemic fluorosis treatment.

Three-Dimensional Co-Culture System of Human Osteoblasts and Osteoclast Precursors from Osteoporotic Patients as an Innovative Model to Study the Role of Nutrients: Focus on Vitamin K2

Several natural compounds, such as vitamin K2, have been highlighted for their positive effects on bone metabolism. It has been proposed that skeletal disorders, such as osteoporosis, may benefit from vitamin K2-based therapies or its regular intake. However, further studies are needed to better clarify the effects of vitamin K2 in bone disorders. To this aim, we developed in vitro a three-dimensional (3D) cell culture system one step closer to the bone microenvironment based on co-culturing osteoblasts and osteoclasts precursors obtained from bone specimens and peripheral blood of the same osteoporotic patient, respectively. Such a 3-D co-culture system was more informative than the traditional 2-D cell cultures when responsiveness to vitamin K2 was analyzed, paving the way for data interpretation on single patients. Following this approach, the anabolic effects of vitamin K2 on the osteoblast counterpart were found to be correlated with bone turnover markers measured in osteoporotic patients’ sera. Overall, our data suggest that co-cultured osteoblasts and osteoclast precursors from the same osteoporotic patient may be suitable to generate an in vitro 3-D experimental model that potentially reflects the individual’s bone metabolism and may be useful to predict personal responsiveness to nutraceutical or drug molecules designed to positively affect bone health.