Premolars restored with posts of different materials: fatigue analysis

Biomechanical Modelling for Tooth Survival Studies: Mechanical Properties, Loads and Boundary Conditions-A Narrative Review

Recent biomechanical studies have focused on studying the response of teeth before and after different treatments under functional and parafunctional loads. These studies often involve experimental and/or finite element analysis (FEA). Current loading and boundary conditions may not entirely represent the real condition of the tooth in clinical situations. The importance of homogenizing both sample characterization and boundary conditions definition for future dental biomechanical studies is highlighted. The mechanical properties of dental structural tissues are presented, along with the effect of functional and parafunctional loads and other environmental and biological parameters that may influence tooth survival. A range of values for Young's modulus, Poisson ratio, compressive strength, threshold stress intensity factor and fracture toughness are provided for enamel and dentin; as well as Young's modulus and Poisson ratio for the PDL, trabecular and cortical bone. Angles, loading magnitude and frequency are provided for functional and parafunctional loads. The environmental and physiological conditions (age, gender, tooth, humidity, etc.), that may influence tooth survival are also discussed. Oversimplifications of biomechanical models could end up in results that divert from the natural behavior of teeth. Experimental validation models with close-to-reality boundary conditions should be developed to compare the validity of simplified models.

Stress-strain Analysis of Premolars With Non-carious Cervical Lesions: Influence of Restorative Material, Loading Direction and Mechanical Fatigue

Noncarious cervical lesions (NCCLs) are characterized by a loss of dental structure at the cementoenamel junction (CEJ) caused by stress, biocorrosion, and attrition. Variations in occlusal loading can promote different stress and strain patterns on the CEJ. Restoration of NCCLs is part of lesion management; however, there is still no conclusive restorative protocol for NCCLs. This study aimed to evaluate the stress and strain distribution of maxillary premolars with NCCLs according to three factors: 1) restorative technique; 2) direction of occlusal loading; and 3) mechanical fatigue. Three-dimensional (3D) finite element analysis (FEA) and strain gauge testing were used to assess stress and strain, respectively. 3D-FEA orthotropic, linear, and elastic models were generated: sound tooth (SO); unrestored NCCL; or NCCL restored with glass ionomer; flowable composite resin; nanofilled composite resin (CR); lithium disilicate ceramic; and nanofilled composite resin core associated with a lithium disilicate laminate (CL). A 150-N compressive static load was applied in two conditions: axially in both cusps (Al); and at a 45° angle to the long axis of the tooth applied to the palatine cusp (Ol). For the experimental tests, specimens were treated as described previously, and one strain gauge was attached to the buccal surface of each tooth to record tooth strains before and after cyclic loading (200,000 cycles, 50 N). FEA showed that the association of NCCL and Ol resulted in higher stress values. CR and CL restorations showed the closest biomechanical behavior to SO for both loading types. Loaded Al or Ol specimens showed higher strain values after mechanical fatigue. Lower stress and strain were observed with Al when compared with Ol. The restoration of NCCLs with composite resin only or associated with ceramic laminates seems to be the best approach because the results for those groups were similar in biomechanical behaviors to sound teeth.

Biomechanical Evaluation of a Tooth Restored with High Performance Polymer PEKK Post-Core System: A 3D Finite Element Analysis

The aim of this study was to evaluate the biomechanical behavior and long-term safety of high performance polymer PEKK as an intraradicular dental post-core material through comparative finite element analysis (FEA) with other conventional post-core materials. A 3D FEA model of a maxillary central incisor was constructed. A cyclic loading force of 50 N was applied at an angle of 45° to the longitudinal axis of the tooth at the palatal surface of the crown. For comparison with traditionally used post-core materials, three materials (gold, fiberglass, and PEKK) were simulated to determine their post-core properties. PEKK, with a lower elastic modulus than root dentin, showed comparably high failure resistance and a more favorable stress distribution than conventional post-core material. However, the PEKK post-core system showed a higher probability of debonding and crown failure under long-term cyclic loading than the metal or fiberglass post-core systems.

Inclusion of the periodontal ligament in studies on the biomechanical behavior of fiber post-retained restorations: An in vitro study and three-dimensional finite element analysis

Endodontically treated teeth are known to have reduced structural strength. Periodontal ligament may influence fracture resistance. The purpose of this study was to assess the influence of including the periodontal ligament in biomechanical studies about endodontically treated and restored teeth. Forty human maxillary central incisors were treated endodontically and randomly divided into four groups: non-crowned (with and without an artificial ligament) and crowned (with and without an artificial ligament) with glass-ceramic crowns. All groups received prefabricated glass-fiber posts and a composite resin core. Specimens were tested, under a flexural-compressive load, until failure occurred. The failure mode was registered for all specimens. The failure loads were recorded and analyzed using an analysis of variance test (p < 0.05). These results were compared with those predicted by a finite element model. The analysis of variance did not show significant differences between the use of crown on the failure load (p = 0.331) and the use of periodontal ligament (p = 0.185). A cohesive mode in crown appeared in crowned teeth and in core in non-crowned groups. For non-crowned teeth, adhesive failure occurred along the cement-enamel junction with a slight tendency in specimens without periodontal ligament. Furthermore, an unfavorable failure mode affects partially the root with no differences regarding non-crown specimens. In crowned teeth, the tendency was an adhesive failure along the cement-enamel junction. The model predicted a distribution of the safety factor consistent with these results. This study showed that inclusion of periodontal ligament is not particularly important on biomechanical behavior of post-retained restorations. However, we recommend its inclusion in fatigue studies.