Physicochemical and osteogenic properties of chairside processed tooth derived bone substitute and bone graft materials

Bone regeneration property of tooth-derived bone substitute prepared chairside for periodontal bone defects: an experimental study

BACKGROUND

Periodontitis often leads to progressive destruction and loss of alveolar bone, the reconstruction of which remains difficult in periodontal therapy. As a novel bone graft material, tooth-derived bone substitute (TDBS) processed from extracted teeth has been previously reported about its osteoconductivity and promising results in bone regeneration. This study was to investigate the biological effects and bone regeneration properties of TDBS in vitro and in vivo using rat periodontal bone defect model.

METHODS

Three groups of materials were used in the experiments: TDBS, TDBS treated with ethylene diamine tetraacetic acid (EDTA) (TDBS-E), and allogeneic bone materials. Calcium (Ca) and phosphate (P) ion dissolutions were quantified by spectrophotometer for seven days. The releases of bone morphogenetic protein-2 (BMP-2) and transforming growth factor-β1 (TGF-β1) were identified by enzyme-linked immunosorbent assay (ELISA). Human osteoblast proliferation, migration, and differentiation were detected by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, cell counting, alkaline phosphatase activity (ALP), and alizarin red staining (ARS), respectively. Furthermore, the osteogenic effects of TDBS on periodontal furcation bone defects were evaluated at eight weeks postoperatively using micro-computed tomography (Micro-CT) and histological analysis.

RESULTS

The dissolution of both Ca and P ions in TDBS increased over time. The BMP-2 released from TDBS was significantly higher than that from TDBS-E and allografts, while the TGF-β1 release from TDBS and TDBS-E groups was higher than that in the allografts. The TDBS-E group could induce the highest level of osteoblast proliferation compared to other groups. Cell migration with allografts co-culture was significantly induced compared to the blank control. However, all groups demonstrated similar positive effects on osteoblast differentiation. Furthermore, in the periodontal model, all materials could effectively enhance bone regeneration in the furcation defect.

CONCLUSIONS

The TDBS prepared chairside as an autogenous bone graft, demonstrating osteoinductivity, which enhances the osteogenic biological characteristics. Therefore, TDBS is suggested as an economical and biocompatible material for periodontal bone regeneration.

Chondrocytes supplemented to bone graft-containing scaffolds expedite cranial defect repair

Critical maxillofacial bone fractures do not heal spontaneously, thus, often there is a need to facilitate repair via surgical intervention. Gold standard approaches, include the use of autologous bone graft, or devices supplemented with osteogenic growth factors and bone substitutes. This research aimed to employ a critical size calvaria defect model, to determine if the addition of chondrocytes to collagen-containing bone graft substitute, may expedite bone repair. As such, using a critical size rat calvaria defect, we implanted a collagen scaffold containing bone graft substitute (i.e., Bone graft scaffold, BG) or BG supplemented with costal chondrocytes (cBG). The rats were subjected to live CT imaging at 1, 6, 9, and 12 weeks following the surgical procedure and sacrificed for microCT imaging of the defect site. Moreover, serum markers and histological evaluation were assessed to determine osseous tissue regeneration and turnover. Live CT and microCT indicated cBG implants displayed expedited bone repair vs, BG alone, already at 6 weeks post defect induction. cBG also displayed a shorter distance between the defect edges and greater mineral apposition distance compared to BG. Summerizing, the data support the addition of chondrocytes to bone substitute, accelerates the formation of new bone within a critical size defect.

Analysis of acute sinusitis-related early failed implant surface: a combined histological, electron microscopy, and X-ray spectroscopy approach

Background

Even though dental implants are a reliable choice for dental rehabilitation, implant failures due to various etiologies have been reported. Early implant failures account for 2 to 6% of installed implants and are reported to have a higher rate than late failures, regardless of loading time. We herein report three cases of acute sinusitis and early implant failure with implants that failed within 1 month after installation. The aim of this study was to evaluate the surface properties of early failed implants and peri-implant tissue to determine the early osseointegration pattern in acute sinusitis-related failed implants as well as the possible role of surface contamination in the failure of osseointegration.

Results

A combined histological, electron microscopy, and X-ray spectroscopy approach was used to characterize the surface of non-osseointegrated titanium implants and the surrounding biological tissues. Morphologic scanning electron microscopy revealed a heterogeneous surface and irregular osseointegration. The implant surface was covered mostly by carbon- and oxygen-rich organic matter. Energy-dispersive X-ray spectroscopy surface analysis of three implants showed the incorporation of some contaminants in both the upper and apical regions. Carbon, nitrogen, sodium, silicon, chlorine, sulfur, gold, and zirconium were detected on the surface of one or more failed implants. Fibrosis, lymphocytic, and macrophage infiltrates and a high activation of osteoclasts surrounding the bone graft particles were detected in the surrounding tissues.

Conclusions

The etiology and mechanism of early implant failure, especially in sinus-related cases, as well as the proper management interventions to minimize the rate of early implant failures, are of great concern. No matter how confident and accurate the surgeon’s operation, there may be unknown errors in the whole procedure that no one knows about. Rather than errors related to the implant surface, it is expected that there were invisible problems during the evaluation of the patient’s own unique sinus mucosal inflammation or the operator’s own procedure. Furthermore, well-designed researches are necessary to reveal the effect of material-related factors on acute sinus complication and early implant failure.

Physicochemical and Morphological Characterization of Dentin from Deciduous and Permanent Teeth Processed by Different Methods for Tissue Regeneration

The composition of autogenous dentin differs from that of extracted deciduous and permanent teeth, as graft material must undergo procedures prior to implantation. The aim of this study was to characterize the physicochemical and morphological properties of dentin from deciduous (DTs) and permanent teeth (PTs) that had been demineralized (DMA), deproteinized (DPA), and decellularized (DSA). The dentin particles were DMA with ethylenediaminetetraacetic acid (EDTA), DPA with isopropanol, and DSA with sodium dodecyl sulfate (SDS). Sound dentin (SD) was used as the control group. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FTIR) and X-ray diffraction (XRD) were used to examine the surface and physicochemical properties of the dentin. DMA and DPA dentin had lower concentrations of calcium and protein respectively than SD, showing a significant difference compared with DMA and DPA dentin from DTs and PTs (p < 0.05). In the DSA dentin, it was possible to eliminate the cellular residues of dentin from DTs and PTs, and the gene GAPDH was not expressed. The results of FTIR and XRD revealed a different physicochemical composition according to the dentin processing. EDS demonstrated that DMA dentin obtained the lowest values of calcium and phosphate, and the micrographs obtained by SEM exhibited a porous matrix structure in DMA dentin to a greater degree than in DPA or DSA dentin. The physicochemical properties and morphology of dentin as an autograft material differ depending on whether the teeth are deciduous or permanent; the processing method conditions the characteristics of the dentin substrate as a matrix for tissue regeneration.

Activation of Human Osteoblasts via Different Bovine Bone Substitute Materials With and Without Injectable Platelet Rich Fibrin in vitro

Introduction

The aim of the in vitro study was to compare the effect of four bovine bone substitute materials (XBSM) with and without injectable platelet-reach fibrin for viability and metabolic activity of human osteoblasts (HOB) as well as expression of alkaline phosphatase (ALP), bone morphogenetic protein 2 (BMP-2), and osteonectin (OCN).

Materials and Methods

Cerabone^® (CB), Bio-Oss^® (BO), Creos Xenogain^® (CX) and MinerOss^® X (MO) ± i-PRF were incubated with HOB. At day 3, 7, and 10, cell viability and metabolic activity as well as expression of ALP, OCN, and BMP-2, was examined.

Results

For non-i-PRF groups, the highest values concerning viability were seen for CB at all time points. Pre-treatment with i-PRF increased viability in all groups with the highest values for CB-i-PRF after 3 and 7 and for CX-i-PRF after 10 days. For metabolic activity, the highest rate among non-i-PRF groups was seen for MO at day 3 and for CB at day 7 and 10. Here, i-PRF groups showed higher values than non-i-PRF groups (highest values: CB + i-PRF) at all time points. There was no difference in ALP-expression between groups. For OCN expression in non-i-PRF groups, CB showed the highest values after day 3, CX after day 7 and 10. Among i-PRF-groups, the highest values were seen for CX + i-PRF. At day 3, the highest BMP-2 expression was observed for CX. Here, for i-PRF groups, the highest increase was seen for CX + i-PRF at day 3. At day 7 and 10, there was no significant difference among groups.

Conclusion

XBSM sintered under high temperature showed increased HOB viability and metabolic activity through the whole period when compared to XBSM manufactured at lower temperatures. Overall, the combination of XBSM with i-PRF improved all cellular parameters, ALP and BMP-2 expression at earlier stages as well as OCN expression at later stages.