Cutting efficiency of four different rotary nickel: Titanium instruments

Effect of body temperature on the cyclic fatigue resistance of the nickel”titanium endodontic instruments: A systematic review and meta-analysis of in vitro studies

Aim:

The aim of this systematic review was to compare the effect of body temperature (I) on the cyclic fatigue resistance (O) of nickel–titanium (NiTi) endodontic instruments (P) to that of room temperature (C).

Methods:

The study was registered in the PROSPERO database (CRD42020204286). A systematic search in PubMed, Scopus, Web of Science, Google Scholar, and OpenGrey was conducted in English until December 31, 2021. In vitro studies comparing the cyclic fatigue resistance of NiTi instruments at the body (35°C ± 2°C) and room temperature (20°C–25°C) were included. Eligible studies were evaluated for risk of bias and meta-analyzed to estimate the effects.

Results:

Twenty-one studies out of 347 met the criteria for inclusion. The meta-analysis included six studies (n = 215) with comparative study parameters. The overall effect sizes (5.49; 95% confidence interval [CI]: 4.04–6.93) were significantly different (P < 0.001), indicating that the mean values at room temperature were significantly (P < 0.001) higher. The effect sizes for full rotary motion (standardized mean difference [SMD]: 4.80; 95% CI: 3.04–6.56) and reciprocating motion (SMD: 6.37; 95% CI: 3.63–9.11) were not significantly different (P = 0.346). Heterogeneity was high (I² = 94%). Sensitivity analysis revealed that the SMD values were not significantly different (P > 0.05) from the overall effect size, indicating that none of the studies had an effect on the overall effect size.

Conclusions:

Within the limitation of the study, the cyclic fatigue resistance of heat-treated NiTi endodontic files is significantly reduced at body temperature when compared to room temperature. Cyclic fatigue testing should be conducted at simulated body temperature.

A critical analysis of research methods and experimental models to study the physical properties of NiTi instruments and their fracture characteristics

The aim of this review is to provide a critical overview of the physical properties (surface hardness, cutting efficiency, bending properties, flexibility and cyclic fatigue resistance) of NiTi instruments. Frequently used experimental models regarding these aspects will be presented and discussed with regard to their strengths and weaknesses. For all these aspects, a plethora of experimental models have been described. Based on a critical appraisal and especially taking the appropriate translation of experimental findings to clinical endodontics into account, suggestions for future research based on clearly defined and valid experimental methodologies will be provided. Up to now, very few attempts have been made to assess which particular physical properties of NiTi instruments exert an impact on the clinical outcome of root canal treatment. Departure from merely focusing on physical properties and fracture characteristics towards more biological aspects in terms of treatment outcome is essential.

A comparison of the shaping ability of three nickel-titanium rotary instruments: a micro-computed tomography study via a contrast radiopaque technique in vitro

Background

Micro-CT (μCT) studies that combine simulated canals with meglucamine diatrizoate to evaluate the shaping ability of nickel-titanium (NiTi) rotary instruments are lacking in the literature. The purpose of this study was to evaluate the shaping ability of three new different nickel-titanium rotary instruments in simulated root canals using μCT.

Methods

Thirty simulated root canals with a curvature of 60° were randomly allocated into the following 3 groups (n = 10): Group 1, ProTaper Universal (PTU) rotary system; Group 2, Reciproc single-file system; and Group 3, K3XF rotary system. Pre- and post-instrumented images of simulated canals were scanned with μCT via a radiopaque contrast technique to build a 3-dimensional (3D) model. Canal transportation, volumetric change and centring ability were evaluated in each group. Instrument failure and preparation time were also recorded. The Kruskal-Wallis test was used for statistical analysis and the significance level was set at p = 0.05.

Results

Reciproc produced greater volume change in the apical part of the canals compared with PTU and K3XF (p < 0.05). K3XF exhibited less transportation and better centring ability at the 2- and 3-mm levels from the apical foramen compared with PTU and Reciproc (p < 0.05). There were no significant differences in the centring ratio and transportation between PTU and Reciproc. Preparation time was significantly shorter in the Reciproc group (p < 0.05).

Conclusions

Under the conditions of our study, all of the canals were 3D reconstructed successfully via the radiopaque contrast technique. Reciproc showed enhanced apical volume changes and K3XF exhibited better centring ability when compared with other groups.

Electronic supplementary material

The online version of this article (doi:10.1186/s12903-016-0326-5) contains supplementary material, which is available to authorized users.

Quantitative evaluation of apical extrusion of intracanal bacteria using K3, Mtwo, RaCe and protaper rotary systems: An in vitro study

Aim:

This aim of this study was to evaluate the number of bacteria extruded apically during root canal preparation using Four Rotary instrumentation techniques.

Materials and Methods:

A total of 50 extracted mandibular premolars were selected, access cavities prepared and inserted in to rubber stoppers of 10 mL glass vial. Root canals were contaminated with a suspension of Enterococcus faecalis (E. faecalis) American Type Culture Collection (ATCC) 29212 and incubated for 24 h at 37°C. Debris extruded from the apical foramen during instrumentation was collected into vials. The numbers of Colony-forming units were determined for each sample.

Statistical Analysis:

The data obtained were analyzed using the one-way ANOVA followed by post-hoc tukey's test with a P = 0.05 as the level for statistical significance.

Results:

Results suggested a statistically significant difference in the number of colony forming units between four experimental rotary Nickel-Titanium instrumentation groups (P < 0.001).

Conclusion:

Although, extrusion of bacteria was found in all the experimental groups. There was less bacterial extrusion in K3 Group while more bacterial extrusion was seen in Mtwo Group.

An ex vivo comparative analysis on shaping ability of four NiTi rotary endodontic instruments using spiral computed tomography

Objective:

Analysis of shaping ability of four different rotary endodontic instruments using spiral computed tomography (CT).

Materials and Methods:

Eighty freshly extracted human mandibular first molars were used in the present study. Samples were randomly divided into four experimental groups with twenty samples in each group. Images of mesiobuccal canal of each sample were obtained pre- and post-operatively using spiral CT. All samples were prepared using their respective endodontic file systems (group I - ProTaper, group II - K3, group III - RaCe, and group IV - Mtwo). Image analyses were done using image analysis software for evaluation of canal transportation and centering ability. Data was then statistically analyzed using analysis of variance.

Results:

There was no statistically significance in transportation in their intergroup difference at any of the three locations (coronal, middle, and apical third). In centering ability there was no statistically significance in the coronal and middle third of the intergroup. However, there was a statistically significance of (P = 0.044) at the apical third between all the groups.

Conclusion:

Canals prepared with ProTaper had more canal transportation at all the three levels of root canal (coronal, middle, and apical third). Canals prepared with Mtwo were well centered at coronal and middle third whereas with RaCe canals were centered only at the apical third. All instruments showed some degree of canal aberrations in terms of shaping ability.