Are temporary anchorage devices truly effective in the treatment of skeletal open bites?

Orthodontic correction of anterior open bite using skeletal anchorage: systematic review and meta-analysis

The purpose of this study was to investigate the scientific evidence on the short- and long-term effects of orthodontic correction of anterior open bite (AOB) using skeletal anchorage (SA). Clinical studies on the use of SA for AOB in patients with permanent dentition, or at least 12 years of age, were searched. Short- and long-term (≥2 years) outcomes were collected. Mean differences were calculated from pooled data. Twenty-four eligible articles with a total of 362 subjects were selected for inclusion in the meta-analysis. There was a significant increase in overbite (3.88 mm, P < 0.001) and maxillary molar intrusion (-2.15 mm, P < 0.001). The mandible showed counterclockwise rotation with anterosuperior chin movement (all P < 0.001). Long term, the decrease in overbite was 19.9% and decrease in molar intrusion was 22.9%. The decrease in the mandibular projection was 14.6% for ANB (A-point-nasion-B-point angle) and 46.2% for mandibular anteroposterior position. The overall risk of bias in the included studies was rated as moderate to high, and publication bias existed for several key variables. SA for maxillary molar intrusion effectively improved dental and skeletal outcomes, but there was a long-term decrease in overbite and maxillary molar position. The variable data quality, heterogeneity, and publication bias in investigated outcomes are limitations in interpreting the findings.

Efficacy of maxillary molar intrusion and quantification of related external apical root resorption - A comparison of two approaches

OBJECTIVE

This retrospective single-centre study aimed to compare the efficacy of maxillary second molar intrusion with two different approaches, miniscrew-assisted molar intrusion and traditional segmental archwire intrusion, and to compare orthodontically induced external apical root resorption (OIERR) during intrusion between two groups via cone beam computed tomography (CBCT).

MATERIALS AND METHODS

A total of 40 adult patients (33.6 ± 10.3 years old) with supraerupted maxillary second molars due to the loss of antagonistic teeth were recruited, with 20 patients in each group. A segmental archwire with adjacent teeth as an anchorage was used in the control group, and 60-100 g of intrusive force was applied by using miniscrews in the experimental group to intrude the overerupted molars. Full-volume CBCT was performed before and after intrusion, and the amount of intrusion and extent of OIERR of the overerupted molars were compared between the two groups.

RESULTS

Supraerupted maxillary second molars could be successfully intruded in an average of 5 months. There was more intrusive movement of the buccal and palatal cusps in the mininscrew group than that in the segmental archwire group (P < .05). The intrusive amount of palatal cusp was 3.67 ± 1.13 mm in the miniscrew group and 2.38 ± 0.74 mm in the segmental archwire group. More palatal OIERR was observed in the miniscrew group (30.3 ± 11.6 mm3) than in the segmental archwire group (21.0 ± 8.66 mm3) (P = .0063). There was no significant difference in OIERR between the two groups for mesial and distal buccal roots (P > .05).

CONCLUSION

Miniscrews help effectively with supraerupted maxillary second molar intrusion, especially for palatal cusps. There was more OIERR in the palatal root when using miniscrews compared to the segmental archwire approach.

Effects of posterior intrusion using skeletal anchorage on treating anterior open bite: A systematic review and meta-analysis

Background

Posterior intrusion with skeletal anchorage is one of the effective methods in the treatment of anterior open bite. Knowing the effects of posterior intrusion, the amount of possible molar intrusion using skeletal anchorage, and its impact on clinical and cephalometric indicators can help the clinician choose the optimal treatment method, especially in borderline surgical cases.

Methods

In this systematic review, a series of articles were collected through a systematic search in databases, and the titles and summaries of all these articles were reviewed. After removing the irrelevant articles, the full texts of the related articles were read carefully, and their validity was evaluated. Only RCTs and observational studies that complied with PICO questions were included. The Cochrane Risk of Bias 2.0 (RoB 2), ROBINS-I, and GRADE were used to assess the risk of bias in the included studies. The relevant information on selected articles was extracted, and a meta-analysis was performed with Review Manager 5.4 software.

Results

The meta-analysis revealed a significant average molar intrusion of 2.89 mm using temporary anchorage devices (TADs). A subgroup analysis showed that miniplates achieved greater intrusion (3.29 mm) compared to miniscrews (2.25 mm) (P=0.03). The level of applied force did not significantly affect the degree of intrusion. Dental parameters such as overbite and overjet were notably altered, with overbite increasing by 4.81 mm and overjet decreasing by 2.06 mm on average. As for the skeletal cephalometric characteristics, SNB, ANB, and SN-Pog increased while mandibular plane angle and lower anterior facial height (LAFH) decreased, and these changes were significant. Meanwhile, SNA and palatal angle changes were not significant.

Conclusion

TADs have proved effective in achieving significant intrusion of maxillary molars, leading to marked improvements in dental and skeletal characteristics in patients with open bite malocclusion. Miniplates proved more effective in achieving greater intrusion.

Temporary anchorage devices and the forces and effects on the dentition and surrounding structures during orthodontic treatment: a scoping review

BACKGROUND

Temporary anchorage devices (TADs) offer the clinician an immediate temporary source of skeletal anchorage for a range of orthodontic interventions. It is important to understand forces involved in using TADs and the effects on the dentition and surrounding structures, to improve clinical outcomes.

OBJECTIVE

To examine and qualitatively synthesize literature on the forces involved with the use of TADs and the effects on the dentition and surrounding structures in orthodontic tooth movement, to provide better understanding of the complex interactions and the clinical implications.

SEARCH METHODS

Electronic databases searched included: Cochrane Library [including Central Register of Controlled Trials (CENTRAL)], Embase via OVID, Pubmed, and Scopus. Study screening and selection were conducted in duplicate.

SELECTION CRITERIA

Studies selected were clinical studies, simulation studies (computer or laboratory-based), or animal studies with no restriction over gender, age, study type (excluding case reports), or setting. Studies focusing on the forces involved with the use of TADs in orthodontic treatment and their effects on the dentition and surrounding structures were included.

DATA COLLECTION AND ANALYSIS

A data charting form was piloted and refined. Data charting was performed independently and in duplicate. This consisted of key fields with predetermined options and free text. The extracted data were collated, and a narrative synthesis conducted.

RESULTS

The results from 203 included studies were grouped into seven TAD based interventions combining the clinical, simulation, and animal studies. They were: En masse retraction of anterior teeth, intrusion, movement of a single tooth, orthopaedic interventions, distalisation, maxillary expansion and other types. The forces involved with the use of TADs, and their effects on the dentition and surrounding structures, were presented in descriptive and tabular formats.

LIMITATIONS

This review restricted study language to English. Formal appraisal of the quality of evidence is not a required feature of scoping reviews, as per the PRISMA-ScR guidelines, however it was evident that a proportion of clinical studies were of high risk of bias and low quality and therefore any proposed changes the reader may consider to their clinical practice should be contextualized in light of this.

CONCLUSIONS

Across the seven types of TAD based interventions the effects on the dentition and surrounding structures are described providing a better understanding of the complex interactions. A guide to the level and direction of forces in each type of intervention is provided to aid clinicians in achieving high quality outcomes.

IMPLICATIONS

There is a need to validate future FEA simulation studies by comparing to clinical data. It is also recommended that future scoping reviews incorporate a formal critical appraisal of studies to facilitate the translation of the results into clinical practice. Development of a standard set of terms for TADs is recommended to facilitate future research.

REGISTRATION

Registration of a scoping review is not possible with PROSPERO.

FUNDING

None to declare.

Treatment of an anterior open bite, bimaxillary protrusion and mesiocclusion by the extraction of premolars and the use of clear aligners

An anterior open bite may be orthodontically treated by either the intrusion of posterior teeth, the extrusion of anterior teeth, or a combination of both. An improvement in bimaxillary protrusion often involves the extraction of premolars and the retraction of the anterior teeth. The treatment of mesiocclusion mainly involves the mesial and/or distal movement of the molars. However, these three types of malocclusions pose significant treatment challenges when using clear aligners. The present case report describes the treatment of a 24-year-old female patient who presented with the above characteristics, which affected her confidence, willingness to smile and masticatory function. A four-premolar extraction plan was designed to resolve the problems using clear aligners as the patient rejected fixed or visible appliances. After 33 months of orthodontic therapy, except for the counter-clockwise rotation of the mandible and the decrease of facial height, the other objectives established in the pre-treatment plan were achieved, and the patient was satisfied with the results. The combination of clear aligners and premolar extractions effectively corrected the skeletal anterior open bite, bimaxillary dentoalveolar protrusion, and mesiocclusion.

A novel machine learning model for class III surgery decision

PURPOSE

The primary purpose of this study was to develop a new machine learning model for the surgery/non-surgery decision in class III patients and evaluate the validity and reliability of this model.

METHODS

The sample consisted of 196 skeletal class III patients. All the cases were allocated randomly, 136 to the training set and the remaining 60 to the test set. Using the test set, the success rate of the artificial neural network model was estimated, along with a 95% confidence interval. To predict surgical cases, we trained a binary classifier using two different methods: random forest (RF) and logistic regression (LR).

RESULTS

Both the RF and the LR model showed high separability when classifying each patient for surgical or non-surgical treatment. RF achieved an area under the curve (AUC) of 0.9395 on the test set. 95% confidence intervals were computed by bootstrap sampling as lower bound = 0.7908 and higher bound = 0.9799. On the other hand, LR achieved an AUC of 0.937 on the test set. 95% confidence intervals were computed by bootstrap sampling as lower bound = 0.8467 and higher bound = 0.9812.

CONCLUSIONS

RF and LR machine learning models can be used to generate accurate and reliable algorithms to successfully classify patients up to 90%. The features selected by the algorithms coincide with the clinical features that we as clinicians weigh heavily when determining a treatment plan. This study further supports that overjet, Wits appraisal, lower incisor angulation, and Holdaway H angle can be used as strong predictors in assessing a patient's surgical needs.

Intrusion of Maxillary Posterior Teeth by Skeletal Anchorage: A Systematic Review and Case Report with Thin Alveolar Biotype

This study aimed to review the literature related to the intrusion of maxillary posterior teeth in subjects needing pre-prosthetic restoration or orthodontic treatment due to anterior open bite, and to report a thin alveolar biotype case needing a pre-prosthetic intrusion of maxillary teeth by introducing a novel, personalized method of intrusion measurement. An electronic search was conducted between February 2022 and March 2022 in the following databases: PubMed, Scopus, Embase, Web of Science, and Lilacs; the terms “tooth movement techniques”, “orthodontic anchorage procedures”, “tooth intrusion”, “intrusion”, “molar”, “premolar”, and “human” were surveyed. Eighteen articles were included in this review; the mean amount of intrusion ranged from between 2.1 ± 0.9 mm and 4.57 ± 0.98 mm (being mostly 2–3 mm). The intrusion force varied between 100 and 500 g; 10 articles reported miniscrews (MS), 7 reported zygomatic plates (ZP), and 1 publication reported both anchorage types. The average treatment time was 6.9 months for MS and 7.9 months for ZP. Levelling the occlusal plane by intrusion of the upper posterior teeth can be achieved by skeletal anchorage. The stability of the obtained results, shortening treatment time, and controlling treatment outcome are the main goals for a complex surgical and orthodontic treatment approach.

Intrusion of the maxillary posterior teeth with a single buccal mini-implant positioned bilaterally in young adults with a tendency towards hyperdivergence: A clinical study

BACKGROUND

Skeletal anchorage systems have been used for intrusion of the posterior teeth with satisfactory results. To achieve this, mini-implants are placed at anatomically challenging sites such as the palate or require several mini-implants to produce the desired effect.

OBJECTIVE

To determine the magnitude of intrusion of the maxillary posterior teeth achieved on a continuous arch wire using a single buccal mini-implant placed bilaterally in young patients with a tendency towards hyperdivergence and to evaluate its influence on the skeletal, dental and soft-tissue structures.

METHODS

A total of 17 patients with proclination of the anterior teeth, tendency towards hyperdivergence and clockwise rotation of the mandible were selected. First premolars were extracted as part of treatment protocol. A 0.022-MBT bracket prescription was used. Mini-implants were placed bilaterally on the buccal aspect at the mucogingival junction or slightly gingival to it between the maxillary second premolar and first permanent molar. A total of 200 g of intrusive force was placed from a continuous 0.019 × 0.025 inch stainless-steel arch wire to the mini-implant by means of an elastomeric thread on both sides. Lateral cephalograms and study models were taken before the start of intrusion and six months later. Parametric and non-parametric tests were done to assess treatment results.

RESULTS

Significant intrusion was observed in the maxillary molar and premolar region with tendency towards intrusion in the anterior region. There was significant decrease in lower anterior facial height (LAFH) with anti-clockwise mandibular rotation, decrease in facial proportion index and total facial height. No changes were observed in the transverse plane.

CONCLUSION

Intrusion of the permanent maxillary molar can be achieved on a continuous arch wire with a single buccal mini-implant placed bilaterally with improvement in facial aesthetics, especially in the vertical plane. This method may be beneficial in patients with borderline vertical discrepancy treated with conventional friction mechanics during space closure after first premolar extractions.