NMR spectroscopy as a tool to close the gap on metabolite characterization under MIST

Complete Reduction to Amplitude Frequency Table (CRAFT)-A perspective

The CRAFT (Complete Reduction to Amplitude Frequency Table) technique, based on Bayesian analysis approach, converts FID and/or interferogram (time domain) to a frequency-amplitude table (tabular domain) in a robust, automated, and time-efficient fashion. This mini review/perspective presents an introduction to CRAFT as a processing workflow followed by a discussion of several practical 1D and 2D examples of its applicability and associated benefit. CRAFT provides high quality quantitative results for complex systems without any need for conventional preprocessing steps, such as phase and baseline corrections. Two-dimensional time domain data are typically truncated, particularly in the evolution dimension, and conventional processing after zero-filling and t_1max -matched apodization masks potentially available peak resolution. The line broadening introduced by extensive zero-filling and severe apodization functions leads to the lack of clear resolution of cross peaks. CRAFT decimation of interferograms, on the other hand, requires minimal or no apodization prior to extraction of the NMR parameters and significantly improves the spectral linewidth of the cross peaks along F₁ dimension compared to conventional (FT) processing. The tabular representation of the CRAFT2d cross peaks information can be visualized in a variety of frequency domain formats for conventional spectral interpretation as well as quantitative applications. A simple workflow to generate in silico oversampled interferogram (iSOS) is presented, and its potential benefit in CRAFT decimation of highly crowded 2D NMR is demonstrated. This report is meant as a collective thesis to present a potentially new paradigm in data processing that questions the need for hitherto unchallenged preprocessing steps, such as phase and baseline correction in 1D and zero-fill/severe apodization in 2D.

Systematic assessment of oat β-glucan catabolism during in vitro digestion and fermentation

β-Glucan as a component of grain cell walls is consumed daily. However, little is known about whether β-glucan is influenced by the gastrointestinal environment. In this study, we aim to investigate the integrated metabolic process of cereal β-glucan. In vitro simulated digestion and fermentation combined with microbiome and metabolome analysis were used to profile the metabolism of β-glucan. Intriguingly, we found that β-glucan was not hydrolyzed by digestive enzymes but partially degraded by gastric acid environment during in vitro digestion. Moreover, β-glucan was utilized by gut microbiota to produce acetate, propionate and butyrate, concurrently, the relative abundance of Lactobacillus significantly increased and Escherichia-Shigella significantly decreased. The correlation analysis between metabolomics datasets and microorganisms revealed that β-glucan catabolism was also accompanied by amino acid catabolism and linoleic acid biosynthesis. Our study offered a forceful basis for the further exploration of the role of β-glucan and gut microbiota in host health.

Quantitative NMR-Based Biomedical Metabolomics: Current Status and Applications

Nuclear Magnetic Resonance (NMR) spectroscopy is a quantitative analytical tool commonly utilized for metabolomics analysis. Quantitative NMR (qNMR) is a field of NMR spectroscopy dedicated to the measurement of analytes through signal intensity and its linear relationship with analyte concentration. Metabolomics-based NMR exploits this quantitative relationship to identify and measure biomarkers within complex biological samples such as serum, plasma, and urine. In this review of quantitative NMR-based metabolomics, the advancements and limitations of current techniques for metabolite quantification will be evaluated as well as the applications of qNMR in biomedical metabolomics. While qNMR is limited by sensitivity and dynamic range, the simple method development, minimal sample derivatization, and the simultaneous qualitative and quantitative information provide a unique landscape for biomedical metabolomics, which is not available to other techniques. Furthermore, the non-destructive nature of NMR-based metabolomics allows for multidimensional analysis of biomarkers that facilitates unambiguous assignment and quantification of metabolites in complex biofluids.

Metabolomics and Isotope Tracing

Great strides have been made over the past decade toward comprehensive study of metabolism. Mass spectrometry (MS) has played a central role by enabling measurement of many metabolites simultaneously. Tracking metabolite labeling from stable isotope tracers can in addition reveal pathway activities. Here, we describe the basics of metabolite measurement by MS, including sample preparation, metabolomic analysis, and data interpretation. In addition, drawing on examples of successful experiments, we highlight the ways in which metabolomics and isotope tracing can illuminate biology.

Use of Hybrid Capillary Tube Apparatus on 400 MHz NMR for Quantitation of Crucial Low-Quantity Metabolites Using aSICCO Signal

Metabolites of new chemical entities can influence safety and efficacy of a molecule and often times need to be quantified in preclinical studies. However, synthetic standards of metabolites are very rarely available in early discovery. Alternate approaches such as biosynthesis need to be explored to generate these metabolites. Assessing the quantity and purity of these small amounts of metabolites with a nondestructive analytical procedure becomes crucial. Quantitative NMR becomes the method of choice for these samples. Recent advances in high-field NMR (>500 MHz) with the use of cryoprobe technology have helped to improve sensitivity for analysis of small microgram quantity of such samples. However, this type of NMR instrumentation is not routinely available in all laboratories. To analyze microgram quantities of metabolites on a routine basis with lower-resolution 400 MHz NMR instrument fitted with a broad band fluorine observe room temperature probe, a novel hybrid capillary tube setup was developed. To quantitate the metabolite in the sample, an artificial signal insertion for calculation of concentration observed (aSICCO) method that introduces an internally calibrated mathematical signal was used after acquiring the NMR spectrum. The linearity of aSICCO signal was established using ibuprofen as a model analyte. The limit of quantification of this procedure was 0.8 mM with 10 K scans that could be improved further with the increase in the number of scans. This procedure was used to quantify three metabolites-phenytoin from fosphenytoin, dextrophan from dextromethorphan, and 4-OH-diclofenac from diclofenac-and is suitable for minibiosynthesis of metabolites from in vitro systems.

NMR-based approach to the analysis of radiopharmaceuticals: radiochemical purity, specific activity, and radioactive concentration values by proton and tritium NMR spectroscopy

Compounds containing tritium are widely used across the drug discovery and development landscape. These materials are widely utilized because they can be efficiently synthesized and produced at high specific activity. Results from internally calibrated (3)H and (1)H nuclear magnetic resonance (NMR) spectroscopy suggests that at least in some cases, this calibrated approach could supplement or potentially replace radio-high-performance liquid chromatography for radiochemical purity, dilution and scintillation counting for the measurement of radioactivity per volume, and liquid chromatography/mass spectrometry analysis for the determination of specific activity. In summary, the NMR-derived values agreed with those from the standard approaches to within 1% to 9% for solution count and specific activity. Additionally, the NMR-derived values for radiochemical purity deviated by less than 5%. A benefit of this method is that these values may be calculated at the same time that (3)H NMR analysis provides the location and distribution of tritium atoms within the molecule. Presented and discussed here is the application of this method, advantages and disadvantages of the approach, and a rationale for utilizing internally calibrated (1)H and (3)H NMR spectroscopy for specific activity, radioactive concentration, and radiochemical purity whenever acquiring (3)H NMR for tritium location.

Reflecting on a decade of metabolite screening and monitoring

The last 10 years have witnessed robust debate within the bioanalytical community and regulatory authorities on the topic of metabolite monitoring and safety assessment. Of particular interest to regulated bioanalytical laboratories was the acceptance by the US FDA and other major regulatory bodies of a tiered approach to bioanalytical assay validation. The tiered approach defines a sliding scale of regulatory rigor for the evaluation of significant human metabolites that encompasses a range of assessments from semi-quantitative assays to fully validated assays, all of which can be used in support of regulatory submissions. This article describes the utilization of a tiered approach at Bristol-Myers Squibb and the decision trees guiding the selection of the appropriate level of assay qualification. Case studies illustrate how decisions are made, how different scientific situations influence the assay choice, and what criteria may be set to continue or discontinue metabolite monitoring in later drug development.

CRAFT (complete reduction to amplitude frequency table)--robust and time-efficient Bayesian approach for quantitative mixture analysis by NMR

The intrinsic quantitative nature of NMR is increasingly exploited in areas ranging from complex mixture analysis (as in metabolomics and reaction monitoring) to quality assurance/control. Complex NMR spectra are more common than not, and therefore, extraction of quantitative information generally involves significant prior knowledge and/or operator interaction to characterize resonances of interest. Moreover, in most NMR-based metabolomic experiments, the signals from metabolites are normally present as a mixture of overlapping resonances, making quantification difficult. Time-domain Bayesian approaches have been reported to be better than conventional frequency-domain analysis at identifying subtle changes in signal amplitude. We discuss an approach that exploits Bayesian analysis to achieve a complete reduction to amplitude frequency table (CRAFT) in an automated and time-efficient fashion - thus converting the time-domain FID to a frequency-amplitude table. CRAFT uses a two-step approach to FID analysis. First, the FID is digitally filtered and downsampled to several sub FIDs, and secondly, these sub FIDs are then modeled as sums of decaying sinusoids using the Bayesian approach. CRAFT tables can be used for further data mining of quantitative information using fingerprint chemical shifts of compounds of interest and/or statistical analysis of modulation of chemical quantity in a biological study (metabolomics) or process study (reaction monitoring) or quality assurance/control. The basic principles behind this approach as well as results to evaluate the effectiveness of this approach in mixture analysis are presented.

Meeting the MIST regulations: human metabolism in Phase I using AMS and a tiered bioanalytical approach

The metabolites in safety testing and ICH-M3 guidance documents emphasize the importance of metabolites when considering safety aspects for new drugs. Both guidances state that relevant metabolites should have safety coverage in humans (although the guidelines have different definitions of relevant metabolites). Not having safety coverage for important metabolites in humans may cause significant delay in the overall pharmaceutical development program. This article discusses the regulatory background regarding safety and metabolites, as well as outlines an integrated strategy taken by one pharmaceutical company, Lundbeck A/S. Lundbeck uses metabolite exposure data from first-in-man studies, obtained using an accelerator MS approach followed by a two-tiered bioanalytical investigation. This enables early availability of key data on this aspect and, overall, represents a powerful risk mitigation strategy.