Human thermal physiological response of wearing personal protective equipment: An educational building semi-open space experimental investigation

With the outbreak and spread of the COVID-19 epidemic, HCWs are frequently required to wear personal protective equipment (PPE) for nucleic acid sample collection in semi-open transition spaces. Wearing PPE causes significant psychological and physical stress in HCWs. In this study, operative temperature (T_op) and wet-bulb globe temperature (WBGT) were used to assess thermal conditions through field experiments, while multiple physiological parameters were measured in the subjects. The results indicated that the subjects showed statistically significant differences in thermal perception and physiological parameters with and without PPE. Using observed increases in heart rate (HR), auditory canal temperature (T_ac), mean skin temperature (MST), and end-tidal CO₂ pressure, subjects were shown to have an increased metabolic rate and heat storage while wearing PPE. Additionally, a decrease in oxygen concentration was also observed, and this decrease may be linked to fatigue and cognitive impairment. Moreover, HR, MST, and T_ac showed a significant linear relationship, which increased with temperature and operative temperature, and the HR response was stronger with PPE than without PPE. The neutral, preferred, and acceptable temperatures were significantly lower with PPE than without PPE, and the deviations for neutral T_op/WBGT were 9.5/7.1 °C and preferred T_op/WBGT was 2.2/4.0 °C, respectively. Moreover, the upper limits of acceptable WBGT, 29.4 °C with PPE and 20.4 °C without PPE, differed significantly between the two phases. Furthermore, the recorded physiological parameter responses and thermal perception responses of the subjects while wearing PPE indicated that they were at risk of thermal stress. Overall, these results suggest that people who wear PPE should focus on their health and thermal stress. This study provides a reference for the development of strategies to counteract heat stress and improve thermal comfort.

Experimental investigation of the effects of personal protective equipment on thermal comfort in hot environments

Since the outbreak of COVID-19, wearing personal protective equipment (PPE) has become increasingly common, especially for healthcare workers performing nucleic acid sample collection. A field experiment and questionnaire survey were conducted in a semi-open transition space of a university building in Guangzhou, southern China. Thirty-two subjects wore PPE to simulate nucleic acid sample collection, during which thermal parameters were recorded and subjective questionnaires were completed. The relationship between thermal sensation and thermal index was analyzed to determine the neutral temperature and comfort temperature zones. Subjects had higher requirements for thermal environment parameters when wearing PPE than when not wearing PPE, and were found to have statistically significant differences in thermal perception when wearing and not wearing PPE. Wearing PPE significantly raised the subjects' thermal and humidity sensations and restricted their airflow. Wearing PPE resulted in thermal discomfort for the subjects and a high unacceptability rate for environmental thermal parameters. The subjects wore PPE for an acceptable duration of approximately 1.5 h. The neutral operative temperatures were significantly lower when wearing PPE than when not wearing PPE, and the deviation from the neutral temperature was 9.7 °C. The neutral operative temperature was 19.5 °C and the comfort temperature zone was 17.4-21.5 °C when subjects wore PPE, demonstrating that subjects who wore PPE preferred lower temperatures. These results suggest that people who wear PPE for work, especially outdoors, should receive more attention to ensure thermal comfort and safety.

The influence of rest break frequency and duration on physical performance and psychophysiological responses: a mining simulation study

Purpose

To investigate the influence of shorter, more frequent rest breaks during simulated work (outdoor mining) in the heat on physical performance and psychophysiological responses.

Methods

On separate days, thirteen males undertook two 225 min simulation trials in the afternoon (12.00–3.45 pm) including 180 min of treadmill walking at a constant rate of perceived exertion of 11 (or ‘light’) on the 6–20 Borg scale in a heat chamber (37 °C, 40% RH), interspersed with 45 min of rest breaks in an air-conditioned room (22 °C, 35% RH). Rest breaks in the current practice (CP) trial occurred at 1.00 and 2.30 pm (30 min and 15 min, respectively), while in the experimental (EXP) trial were at 1.00 (15 min), 1.45, 2.25 and 3.05 pm (10 min each).

Results

Total distance covered was not different (p = 0.086) between CP (12,858 ± 2207 m) and EXP (12,094 ± 2174 m). Heart rate, thermal sensation and thermal comfort were significantly higher at 120–180 min (all p < 0.05) in CP compared to EXP. Moderate- to large-effect sizes (Hedge’s g) between trials were also found at 120–180 min for core temperature (g = 0.50 and 0.99, respectively). No differences were found between trials for cognitive performance, perceived fatigue, urine specific gravity, or total water intake (p > 0.05).

Conclusion

Shorter, more frequent rest breaks have little impact on physical performance, thermal strain and exercise-related sensations. Current practices should remain in place until further studies can be conducted on an actual mine site during summer where outdoor workers perform their work duties.

Reversible Hydration Composite Films for Evaporative Perspiration Control and Heat Stress Management

Donning of personal protective equipment (PPE) in the healthcare sector has been intensified by the on-going COVID-19 pandemic around the globe. While extensive PPE provides protection, it typically limits moisture permeability and severely hinders the sweat evaporation process, resulting in greater heat stress on the personnel. Herein, a zinc-poly(vinyl alcohol) (Zn-PVA) composite film is fabricated by embedding a super-hygroscopic zinc-ethanolamine complex (Zn-complex) in the PVA matrix. By attaching the Zn-PVA composite film, the relative humidity (RH) inside the protective suit decreases from 91.0% to 48.2%. The reduced RH level, in turn, enhances evaporative cooling, hence bringing down the heat index from 64.6 to 40.0 °C at an air temperature of 35 °C, remarkably lowering the likelihood of heat stroke. The American Society for Testing and Materials tests conducted on a sweating manikin have also proven that the Zn-PVA composite films can significantly reduce the evaporative resistance of the protective suit by 90%. The low material cost, facile fabrication process, and reusability allow the Zn-PVA composition films to be readily available for healthcare workers worldwide. This application can be further extended to other occupations that are facing severe thermal discomfort and heat stress.

Occupational Heat Stress: Multi-Country Observations and Interventions

BACKGROUND

Occupational heat exposure can provoke health problems that increase the risk of certain diseases and affect workers' ability to maintain healthy and productive lives. This study investigates the effects of occupational heat stress on workers' physiological strain and labor productivity, as well as examining multiple interventions to mitigate the problem.

METHODS

We monitored 518 full work-shifts obtained from 238 experienced and acclimatized individuals who work in key industrial sectors located in Cyprus, Greece, Qatar, and Spain. Continuous core body temperature, mean skin temperature, heart rate, and labor productivity were collected from the beginning to the end of all work-shifts.

RESULTS

In workplaces where self-pacing is not feasible or very limited, we found that occupational heat stress is associated with the heat strain experienced by workers. Strategies focusing on hydration, work-rest cycles, and ventilated clothing were able to mitigate the physiological heat strain experienced by workers. Increasing mechanization enhanced labor productivity without increasing workers' physiological strain.

CONCLUSIONS

Empowering laborers to self-pace is the basis of heat mitigation, while tailored strategies focusing on hydration, work-rest cycles, ventilated garments, and mechanization can further reduce the physiological heat strain experienced by workers under certain conditions.

Occupational Heat Stress and Practical Cooling Solutions for Healthcare and Industry Workers During the COVID-19 Pandemic

Treatment and management of severe acute respiratory syndrome coronavirus-2, which causes coronavirus disease (COVID-19), requires increased adoption of personal protective equipment (PPE) to be worn by workers in healthcare and industry. In warm occupational settings, the added burden of PPE threatens worker health and productivity, a major lesson learned during the West-African Ebola outbreak which ultimately constrained disease control. In this paper, we comment on the link between COVID-19 PPE and occupational heat strain, cooling solutions available to mitigate occupational heat stress, and practical considerations surrounding their effectiveness and feasibility. While the choice of cooling solution depends on the context of the work and what is practical, mitigating occupational heat stress benefits workers in the healthcare and industrial sectors during the COVID-19 disease outbreak.

The nexus between social impacts and adaptation strategies of workers to occupational heat stress: a conceptual framework

Adverse effects of occupational heat stress in the context of the changing climate on working populations are subtle but considerably harmful. However, social dimensions and impacts of climate change-related occupational heat concerns on workers' safety and health, productivity and well-being are often overlooked or relegated as minor issues in social impact analyses of occupational heat exposure due to climate change. This paper offers a conceptual framework based on an appraisal and synthesis of the literature on social impacts of climate change-related occupational heat exposure on workers' safety and health, productivity and social welfare and the quest to localise and achieve sustainable development goals. A sustained global, national, institutional and individual collaborative involvement and financial support for research, improved adaptation and social protection strategies, predominantly in the developing world, where a large number of people work outdoors, can reduce heat exposure and boost the resilience and adaptive capacity of workers to facilitate efforts to achieve sustainable development goals.