The effects of posture and subject-to-subject variations on the position, shape and volume of abdominal and thoracic organs

Development of personalizable female and male pedestrian SAFER human body models

OBJECTIVES

Vulnerable road users are globally overrepresented as victims of road traffic injuries. Developing biofidelic male and female pedestrian human body models (HBMs) that represent diverse anthropometries is essential to enhance road safety and propose intervention strategies.

METHODS

In this study, 50th percentile male and female pedestrians of the SAFER HBM were developed via a newly developed image registration-based mesh morphing framework. The performance of the HBMs was evaluated by means of a set of cadaver experiments, involving subjects struck laterally by a generic sedan buck.

RESULTS

In simulated whole-body pedestrian collisions, the personalized HBMs effectively replicate trajectories of the head and lower body regions, as well as head kinematics, in lateral impacts. The results also demonstrate the personalization framework's capacity to generate personalized HBMs with reliable mesh quality, ensuring robust simulations.

CONCLUSIONS

The presented pedestrian HBMs and personalization framework provide robust means to reconstruct and evaluate head impacts in pedestrian-to-vehicle collisions thoroughly and accurately.

PIPER adult comfort: an open-source full body human body model for seating comfort assessment and its validation under static loading conditions

Introduction: In this paper we introduce an adult-sized FE full-body HBM for seating comfort assessments and present its validation in different static seating conditions in terms of pressure distribution and contact forces. Methods: We morphed the PIPER Child model into a male adult-sized model with the help of different target sources including his body surface scans, and spinal and pelvic bone surfaces and an open sourced full body skeleton. We also introduced soft tissue sliding under the ischial tuberosities (ITs). The initial model was adapted for seating applications with low modulus soft tissue material property and mesh refinements for buttock regions, etc. We compared the contact forces and pressure-related parameters simulated using the adult HBM with those obtained experimentally from the person whose data was used for the model development. Four seat configurations, with the seat pan angle varying from 0° to 15° and seat-to-back angle fixed at 100°, were tested. Results: The adult HBM could correctly simulate the contact forces on the backrest, seat pan, and foot support with an average error of less than 22.3 N and 15.5 N in the horizontal and vertical directions, which is small considering the body weight (785 N). In terms of contact area, peak, and mean pressure, the simulation matched well with the experiment for the seat pan. With soft tissue sliding, higher soft tissue compression was obtained in agreement with the observations from recent MRI studies. Discussion: The present adult model could be used as a reference using a morphing tool as proposed in PIPER. The model will be published openly online as part of the PIPER open-source project (www.PIPER-project.org) to facilitate its reuse and improvement as well as its specific adaptation for different applications.

A numerical study on the safety belt-to-pelvis interaction

The slide of the lap belt over the iliac crest of the pelvis during vehicle frontal crashes can substantially increase the risk of some occupant injuries. A multitude of factors, related to occupants or the design of belt, are associated with this phenomenon. This study investigates safety belt-to-pelvis interaction and identifies the most influential parameters. It also explores how initial lap belt position influences the interaction between lap belt and pelvis. A finite element model of the interaction between lap belt with pelvis through a soft tissue part was created. Belt angle, belt force, belt loading rate and belt-to-body friction as belt design parameters, and pelvis angle, constitute parameters of soft tissue, and soft tissue-to-pelvis friction as occupant parameters were inspected. For the soft tissue part, subcutaneous adipose tissue with different thicknesses was created and the effect initial lap belt position may have on lap belt-to-pelvis interaction was investigated. The influential parameters have been identified as: the belt angle and belt force as belt design parameters and the pelvis angle and compressibility of soft tissue as occupant parameters. The risk for the slide of lap belt over the iliac crest of the pelvis was predicted higher as the initial lap belt positions goes superior to the pelvis. Of different submarining parameters, the lap belt angle represents the most influential one. The lap belt-to-pelvis interaction is influenced by the thickness of subcutaneous adipose tissue between lap belt and pelvis indicating a higher risk for obese occupants.

Analysis of Lap Belt Fit to Human Subjects using CT Images

In vehicle collisions, the lap belt should engage the anterior superior iliac spine (ASIS). In this study, threedimensional (3D) shapes of bones and soft tissues around the pelvis were acquired using a computed tomography (CT) scan of 10 male and 10 female participants wearing a lap belt. Standing, upright sitting, and reclined postures were scanned using an upright CT and a supine CT scan system. In the upright sitting posture, the thigh height was larger with a higher BMI while the ASIS height did not change significantly with BMI. As a result, the height of the ASIS relative to the thigh (ASIS-thigh height) became smaller as the BMI increased. Because the thigh height of females was smaller than that of males, the ASIS-thigh height was larger for females than for males. As the ASIS-thigh height was larger, the overlap of the lap belt with the ASIS increased. Thus, the lap belt overlapped more with the ASIS for the females than for the males. The abdomen outer shape is characterized by the trouser cord formed valley, the torso/thigh junction, and the anterior convexity formed between them depending on the adipose tissues. The abdomen outer shapes changed from the standing, the reclined posture to the upright sitting posture. In the reclined sitting posture, the lap belt is positioned upward and rearward relative to the ASIS, and the overlap of the lap belt with the ASIS was smaller compared to the upright posture.

A new method to assess the deformations of internal organs of the abdomen during impact

OBJECTIVES

Due to limitations of classic imaging approaches, the internal response of abdominal organs is difficult to observe during an impact. Within the context of impact biomechanics for the protection of the occupant of transports, this could be an issue for human model validation and injury prediction.

METHODS

In the current study, a previously developed technique (ultrafast ultrasound imaging) was used as the basis to develop a protocol to observe the internal response of abdominal organs in situ at high imaging rates. The protocol was applied to 3 postmortem human surrogates to observe the liver and the colon during impacts delivered to the abdomen.

RESULTS

The results show the sensitivity of the liver motion to the impact location. Compression of the colon was also quantified and compared to the abdominal compression.

CONCLUSIONS

These results illustrate the feasibility of the approach. Further tests and comparisons with simulations are under preparation.

Development and Full Body Validation of a 5th Percentile Female Finite Element Model

To mitigate the societal impact of vehicle crash, researchers are using a variety of tools, including finite element models (FEMs). As part of the Global Human Body Models Consortium (GHBMC) project, comprehensive medical image and anthropometrical data of the 5th percentile female (F05) were acquired for the explicit purpose of FEM development. The F05-O (occupant) FEM model consists of 981 parts, 2.6 million elements, 1.4 million nodes, and has a mass of 51.1 kg. The model was compared to experimental data in 10 validation cases ranging from localized rigid hub impacts to full body sled cases. In order to make direct comparisons to experimental data, which represent the mass of an average male, the model was compared to experimental corridors using two methods: 1) post-hoc scaling the outputs from the baseline F05-O model and 2) geometrically morphing the model to the body habitus of the average male to allow direct comparisons. This second step required running the morphed full body model in all 10 simulations for a total of 20 full body simulations presented. Overall, geometrically morphing the model was found to more closely match the target data with an average ISO score for the rigid impacts of 0.76 compared to 0.67 for the scaled responses. Based on these data, the morphed model was then used for model validation in the vehicle sled cases. Overall, the morphed model attained an average weighted score of 0.69 for the two sled impacts. Hard tissue injuries were also assessed and the baseline F05-O model was found to predict a greater occurrence of pelvic fractures compared to the GHBMC average male model, but predicted fewer rib fractures.

Application of Radial Basis Function Methods in the Development of a 95th Percentile Male Seated FEA Model

Human body finite element models (FEMs) are a valuable tool in the study of injury biomechanics. However, the traditional model development process can be time-consuming. Scaling and morphing an existing FEM is an attractive alternative for generating morphologically distinct models for further study. The objective of this work is to use a radial basis function to morph the Global Human Body Models Consortium (GHBMC) average male model (M50) to the body habitus of a 95th percentile male (M95) and to perform validation tests on the resulting model. The GHBMC M50 model (v. 4.3) was created using anthropometric and imaging data from a living subject representing a 50th percentile male. A similar dataset was collected from a 95th percentile male (22,067 total images) and was used in the morphing process. Homologous landmarks on the reference (M50) and target (M95) geometries, with the existing FE node locations (M50 model), were inputs to the morphing algorithm. The radial basis function was applied to morph the FE model. The model represented a mass of 103.3 kg and contained 2.2 million elements with 1.3 million nodes. Simulations of the M95 in seven loading scenarios were presented ranging from a chest pendulum impact to a lateral sled test. The morphed model matched anthropometric data to within a rootmean square difference of 4.4% while maintaining element quality commensurate to the M50 model and matching other anatomical ranges and targets. The simulation validation data matched experimental data well in most cases.

Statistical modeling of human liver incorporating the variations in shape, size, and material properties

The liver is one of the most frequently injured abdominal organs during motor vehicle crashes. Realistic numerical assessments of liver injury risk for the entire occupant population require incorporating inter-subject variations into numerical models. The main objective of this study was to quantify the shape variations of human liver in a seated posture and the statistical distributions of its material properties. Statistical shape analysis was applied to construct shape models of the livers of 15 adult human subjects, recorded in a typical seated (occupant) posture. The principal component analysis was then utilized to obtain the modes of variation, the mean model, and 95% statistical boundary shape models. In addition, a total of 52 tensile tests were performed on the parenchyma of three fresh human livers at four loading rates (0.01, 0.1, 1, and 10 s^-1) to characterize the rate-dependent and failure properties of the human liver. A FE-based optimization approach was employed to identify the material parameters of an Ogden material model for each specimen. The mean material parameters were then determined for each loading rate from the characteristic averages of the stress-strain curves, and a stochastic optimization approach was utilized to determine the standard deviations of the material parameters. Results showed that the first five modes of the human liver shape models account for more than 60% of the overall anatomical variations. The distributions of the material parameters combined with the mean and statistical boundary shape models could be used to develop probabilistic finite element (FE) models, which may help to better understand the variability in biomechanical responses and injuries to the abdominal organs under impact loading.