Thermal inactivation of Listeria innocua in salmon (Oncorhynchus keta) caviar using conventional glass and novel aluminum thermal-death-time tubes

Anti-inflammatory, antioxidant and anti-virulence roles of atractylodin in attenuating Listeria monocytogenes infection

Background

Listeria monocytogenes (L. monocytogenes), as a pandemic foodborne pathogen, severely threatens food security and public health care worldwide, which evolves multiple bacterial virulence factors (such as listeriolysin O, LLO) for manipulating the immune response of L. monocytogenes-host interactions.

Methods

Hemolysis assay was employed to screen a potential LLO inhibitor and the underlying mechanisms were investigated using molecular dynamics (MD) simulation and oligomerization assay. The effects of candidates on immune response were examined by qRT-PCR and immunoblotting analysis. Histological analysis, ELISA assay and biochemistry detection were conducted to assess in vivo efficacy of candidates.

Results

In the present study, natural terpenoid atractylodin was characterized as an alternative drug candidate for the treatment of L. monocytogenes by the regulation of LLO function and host Nrf2/NLRP3 signaling pathway. Notably, in vivo infection model by L. monocytogenes also highlighted that atractylodin treatment provided effective therapeutic benefits, as evidenced by decreased bacterial burden and diminished inflammation. Congruently, the survival rate of L. monocytogenes-infection mice increased significantly from 10.0% to 40.0% by atractylodin treatment.

Conclusion

Collectively, our study showed for the first time that atractylodin has tremendous potential to attenuate L. monocytogenes pathogenicity by blocking LLO pore formation and mediating the suppression of inflammation and oxidative stress, providing a promising therapeutic strategy and broadening the applications of atractylodin against L. monocytogenes infection.

A Comparison of Three Methods for Determining Thermal Inactivation Kinetics: A Case Study on Salmonella enterica in Whole Milk Powder

ABSTRACT

Different methods for determining the thermal inactivation kinetics of microorganisms can result in discrepancies in thermal resistance values. In this study, thermal resistance of Salmonella in whole milk powder was determined with three methods: thermal death time (TDT) disk in water bath, pouches in water bath, and the TDT Sandwich system. Samples from three production lots of whole milk powder were inoculated with a five-strain Salmonella cocktail and equilibrated to a water activity of 0.20. The samples were then subjected to three isothermal treatments at 75, 80, or 85°C. Samples were removed at six time points and cultures were enumerated for survivors. The inactivation data were fitted to two consolidated models: two primary models (log linear and Weibull) and one secondary model (Bigelow). Normality testing indicated that all the model parameters were normally distributed. None of the model parameters for both consolidated models were significantly different (α = 0.05). The amount of inactivation during the come-up time was also not significantly different among the methods (α = 0.05). However, the TDT Sandwich resulted in less inactivation during the come-up time and overall less variation in model parameters. The survivor data from all three methods were combined and fitted to both consolidated models. The Weibull had a lower root mean square error and a better fit, according to the corrected Akaike's information criterion. The three thermal treatment methods produced results that were not significantly different; thus, the methods are interchangeable, at least for Salmonella in whole milk powder. Comparisons with more methods, other microorganisms, and larger varieties of food products using the same framework presented in this study could provide guidance for standardizing thermal inactivation kinetics studies for microorganisms in foods.

HIGHLIGHTS

TDT Sandwich: An open source dry heat system for characterizing the thermal resistance of microorganisms

The determination of the thermal death kinetics of microorganisms has traditionally been performed with liquid baths which have some disadvantages such as liquid spillage and liquid infiltration into samples. The TDT Sandwich was developed as a free, open source alternative that utilizes dry heat. The system is capable of heating samples up to 140 °C and maintaining it within 0.2 °C of the target temperature. Other features of the TDT Sandwich include adjustable heating rates up to approximately 100 °C/min, real-time display and recording of temperature readings at a nominal rate of 5 Hz, an optional thermocouple for acquiring temperature of samples, built-in heating timer, and customizable operating parameters. The modular nature of the TDT Sandwich allows multiple units to be connected to a computer or laptop. Operation of the TDT Sandwich is done through a computer program which, along with the build instructions and microcontroller program, are open source and are available for free to the public at https://doi.org/10.17605/OSF.IO/5Q3Y7.

Performance of a Heating Block System Designed for Studying the Heat Resistance of Bacteria in Foods

Knowledge of bacteria's heat resistance is essential for developing effective thermal treatments. Choosing an appropriate test method is important to accurately determine bacteria's heat resistances. Although being a major factor to influence the thermo-tolerance of bacteria, the heating rate in samples cannot be controlled in water or oil bath methods due to main dependence on sample's thermal properties. A heating block system (HBS) was designed to regulate the heating rates in liquid, semi-solid and solid foods using a temperature controller. Distilled water, apple juice, mashed potato, almond powder and beef were selected to evaluate the HBS's performance by experiment and computer simulation. The results showed that the heating rates of 1, 5 and 10 °C/min with final set-point temperatures and holding times could be easily and precisely achieved in five selected food materials. A good agreement in sample central temperature profiles was obtained under various heating rates between experiment and simulation. The experimental and simulated results showed that the HBS could provide a sufficiently uniform heating environment in food samples. The effect of heating rate on bacterial thermal resistance was evaluated with the HBS. The system may hold potential applications for rapid and accurate assessments of bacteria's thermo-tolerances.

The Heat Resistance of Microbial Cells Represented by D Values Can be Estimated by the Transition Temperature and the Coefficient of Linear Expansion

We previously developed a method for evaluating the heat resistance of microorganisms by measuring the transition temperature at which the coefficient of linear expansion of a cell changes. Here, we performed heat resistance measurements using a scanning probe microscope with a nano thermal analysis system. The microorganisms studied included six strains of the genus Bacillus or related genera, one strain each of the thermophilic obligate anaerobic bacterial genera Thermoanaerobacter and Moorella, two strains of heat-resistant mold, two strains of non-sporulating bacteria, and one strain of yeast. Both vegetative cells and spores were evaluated. The transition temperature at which the coefficient of linear expansion due to heating changed from a positive value to a negative value correlated strongly with the heat resistance of the microorganism as estimated from the D value. The microorganisms with greater heat resistance exhibited higher transition temperatures. There was also a strong negative correlation between the coefficient of linear expansion and heat resistance in bacteria and yeast, such that microorganisms with greater heat resistance showed lower coefficients of linear expansion. These findings suggest that our method could be useful for evaluating the heat resistance of microorganisms.

Predicting the Quality of Pasteurized Vegetables Using Kinetic Models: A Review

A resurgence in interest examining thermal pasteurization technologies has been driven by demands for "cleaner" labeling and the need of organic and natural foods markets for suitable preventive measures to impede microbial growth and extend shelf life of minimally processed foods and ready-to-eat foods with a concomitant reduction in the use of chemical preservatives. This review describes the effects of thermal pasteurization on vegetable quality attributes including altering flavor and texture to improve consumer acceptability, stabilizing color, improving digestibility, palatability and retaining bioavailability of important nutrients, and bioactive compounds. Here, we provide kinetic parameters for inactivation of viral and bacterial pathogens and their surrogates and marker enzymes used to monitor process effectiveness in a variety of plant food items. Data on thermal processing protocols leading to higher retention and bioactivity are also presented. Thermal inactivation of foodborne viruses and pathogenic bacteria, specifically at lower pasteurization temperatures or via new technologies such as dielectric heating, can lead to greater retention of "fresh-like" properties.

Influence of desiccation on the sensitivity of Cronobacter spp. to lactoferrin or nisin in broth and powdered infant formula

Although outbreaks caused by Cronobacter spp. (Enterobacter sakazakii) are rare, infections by this organism have a case-fatality rate which may reach 80%. Powdered infant milk formula (PIMF) is considered a major source for human infection with Cronobacter spp. The organism has the capability to survive in dry environments for long periods (approximately 2 years). Current interest in the use of natural antimicrobials including lactoferrin (LF) and nisin has developed because of the desire for preservative-free food products. The objective of the present study was to evaluate the antimicrobial activity of bovine LF or nisin against undesiccated and desiccated Cronobacter spp. cells in 0.2% peptone water (PW) and reconstituted PIMF at different temperatures. In 0.2% PW, 2.5 mg/ml LF was able to inactivate 4 log(10) CFU/ml of undesiccated cells of Cronobacter spp. in 4 h at 37 degrees C but at lower temperatures, higher concentrations of LF as well as longer exposure were needed to achieve the same effect as at 37 degrees C. Similarly, the effect of nisin against undesiccated cells of Cronobacter spp. was concentration and temperature dependent in 0.2% PW. It was found that 1500 IU/ml caused a 4 log(10) CFU/ml reduction of undesiccated cells of Cronobacter spp. at 21 degrees C and 37 degrees C. Desiccated Cronobacter spp. cells in 0.2% PW were more sensitive to LF action than were undesiccated cells. A 4 log(10) CFU/ml reduction was obtained with 2.5 mg/ml LF after 1 h at 21 and 37 degrees C or 8 h at 10 degrees C. In contrast, desiccated cells of Cronobacter spp. were more resistant to nisin. Furthermore, neither LF nor nisin had detectable antimicrobial activity against desiccated or undesiccated Cronobacter spp. in reconstituted PIFM. Heating at 55 degrees C for 5 min with nisin in reconstituted PIFM did not enhance the antimicrobial activity of nisin. Unexpectedly, nisin appeared to protect Cronobacter spp. from the damaging effects of heat treatment. The reduced antimicrobial activity of LF and nisin in reconstituted PIMF was potentially explained by the higher concentration of Ca(2+), Mg(2+) and Fe(3+) in the latter.

Factors affecting thermally induced furan formation

Furan, a potential carcinogen, can be induced by heat from sugars, ascorbic acid, and fatty acids. The objective of this research was to investigate the effect of pH, phosphate, temperature, and heating time on furan formation. Heat-induced furan formation from free sugars, ascorbic acid, and linoleic acid was profoundly affected by pH and the presence of phosphate. In general, the presence of phosphate increased furan formation in solutions of sugars and ascorbic acid. In a linoleic acid emulsion, phosphate increased the formation of furan at pH 6 but not at pH 3. When an ascorbic acid solution was heated, higher amounts of furan were produced at pH 3 than at pH 6 regardless of phosphate's presence. However, in linoleic acid emulsion, more furan was produced at pH 6 than at pH 3. The highest amount of furan was formed from the linoleic acid emulsion at pH 6. In fresh apple cider, a product with free sugars as the major components (besides water) and little fatty acids, ascorbic acid, or phosphate, small or very low amounts of furan was formed by heating at 90-120 degrees C for up to 10 min. The results indicated that free sugars may not lead to significant amounts of furan formation under conditions for pasteurization and sterilization. Importantly, this is the first report demonstrating that phosphate (in addition to pH) plays a significant role in thermally induced furan formation.

Influence of heat transfer with tube methods on measured thermal inactivation parameters for Escherichia coli

The purpose of this study was to investigate the influence of heat transfer on measured thermal inactivation kinetic parameters of bacteria in solid foods when using tube methods. The bacterial strain selected for this study, Escherichia coli K-12, had demonstrated typical first-order inactivation characteristics under isothermal test conditions. Three tubes of different sizes (3, 13, and 20 mm outer diameter) were used in the heat treatments at 57, 60, and 63 degrees C with mashed potato as the test food. A computer model was developed to evaluate the effect of transit heat transfer behavior on microbial inactivation in the test tubes. The results confirmed that the survival curves of E. coli K-12 obtained in 3-mm capillary tubes were log linear at the three tested temperatures. The survival curves observed under nonisothermal conditions in larger tubes were no longer log linear. Slow heat transfer alone could only partially account for the large departures from log-linear behavior. Tests with the same bacterial strain after 5 min of preconditioning at a sublethal temperature of 45 degrees C revealed significantly enhanced heat resistance. Confirmative tests revealed that the increased heat resistance of the test bacterium in the center of the large tubes during the warming-up periods resulted in significantly larger D-values than those obtained with capillary tube methods.

Inhibition of Listeria innocua in hummus by a combination of nisin and citric acid

The effect of nisin or citric acid or combinations of these two inhibitors on the inactivation of a cocktail of three Listeria innocua strains was investigated in a model brain heart infusion (BHI) broth and hummus (chickpea dip). In BHI broth, citric acid had a limited ability to inhibit L. innocua growth. Nisin initially reduced L. innocua concentrations by about 3 log cycles; however, L. innocua reached concentrations similar to those of the control after 5 days at 22 degrees C. In combination, the effects of 500 IU/ml nisin and 0.2% citric acid were synergistic and resulted in complete elimination of L. innocua in the BHI broth. The inhibition of L. innocua by nisin (500 or 1,000 IU/g), citric acid (0.1, 0.2, or 0.3%), or their combinations also was evaluated in hummus. Citric acid alone did not affect L. innocua growth or the aerobic bacterial plate count. A combination of 1,000 IU/g nisin and 0.3% citric acid was somewhat effective (approximately 1.5-log reduction) in controlling the concentration of L. innocua and the aerobic plate count for up to 6 days. This combination also may be useful, in addition to proper hygienic practices, for minimizing the growth of the pathogen Listeria monocytogenes in hummus.

Comparison of effects of high-pressure processing and heat treatment on immunoactivity of bovine milk immunoglobulin G in enriched soymilk under equivalent microbial inactivation levels

Immunoglobulin-rich foods may provide health benefits to consumers. To extend the refrigerated shelf life of functional foods enriched with bovine immunoglobulin G (IgG), nonthermal alternatives such as high-pressure processing (HPP) may offer advantages to thermal processing for microbial reduction. To evaluate the effects of HPP on the immunoactivity of bovine IgG, a soymilk product enriched with milk protein concentrates, derived from dairy cows that were hyperimmunized with 26 human pathogens, was subjected to HPP or heat treatment. To achieve a 5 log reduction in inoculated Escherichia coli 8739, the HPP or heat treatment requirements were 345 MPa for 4 min at 30 degrees C or for 20 s at 70 degrees C, respectively. To achieve a 5 log reduction in natural flora in the enriched soymilk, the HPP or heat treatments needed were 552 MPa for 4 min at 30 degrees C or for 120 s at 78.2 degrees C, respectively. At equivalent levels for a 5 log reduction in E. coli, HPP and heat treatment caused 25% and no detectable loss in bovine IgG activity, respectively. However, at equivalent levels for a 5 log reduction in natural flora, HPP and heat resulted in 65 and 85% loss of bovine IgG activity, respectively. Results of combined pressure-thermal kinetic studies of bovine milk IgG activity were provided to determine the optimal process conditions to preserve product function.

Destruction of Listeria monocytogenes in sturgeon (Acipenser transmontanus) caviar by a combination of nisin with chemical antimicrobials or moderate heat

The objective of this study was to investigate the effect of nisin in combination with heat or antimicrobial chemical treatments (such as lactic acid, chlorous acid, and sodium hypochlorite) on the inhibition of Listeria monocytogenes and total mesophiles in sturgeon (Acipenser transmontanus) caviar. The effects of nisin (250, 500, 750, and 1,000 IU/ml), lactic acid (1, 2, and 3%), chlorous acid (134 and 268 ppm), sodium hypochlorite (150 and 300 ppm), and heat at 60 degrees C for 3 min were evaluated for a five-strain mixture of L. monocytogenes and total mesophiles in sturgeon caviar containing 3.5% salt. Selected combinations of these antimicrobial treatments were also tested. Injured and viable L. monocytogenes cells were recovered using an overlay method. Treating caviar with > or =500 IU/ml nisin initially reduced L. monocytogenes by 2 to 2.5 log units. Chlorous acid (268 ppm) reduced L. monocytogenes from 7.7 log units to undetectable (<0.48 log units) after 4 days of storage at 4 degrees C. However, there were no synergistic effects observed for combinations of nisin (500 or 750 IU/ml) plus either lactic acid or chlorous acid. Lactic acid caused a slight reduction (approximately 1 log unit) in the microbial load during a 6-day period at 4 degrees C. Sodium hypochlorite was ineffective at the levels tested. Mild heating (60 degrees C for 3 min) with nisin synergistically reduced viable counts of L. monocytogenes and total mesophiles. No L. monocytogenes cells (<0.48 log units) were recovered from caviar treated with heat and nisin (750 IU/ml) after a storage period of 28 days at 4 degrees C.

Inactivation of Listeria innocua in nisin-treated salmon (Oncorhynchus keta) and sturgeon (Acipenser transmontanus) caviar heated by radio frequency

Recent regulatory concerns about the presence of the pathogen Listeria monocytogenes in ready-to-eat aquatic foods such as caviar has prompted the development of postpackaging pasteurization processes. However, caviar is heat labile, and conventional pasteurization processes affect the texture, color, and flavor of these foods negatively. In this study, chum salmon (Oncorhynchus keta, 2.5% total salt) caviar or ikura and sturgeon (Acipenser transmontanus, 3.5% total salt) caviar were inoculated with three strains of Listeria innocua in stationary phase at a level of more than 10(7) CFU/g. L innocua strains were used because they exhibit an equivalent response to L monocytogenes for many physicochemical processing treatments, including heat treatment. The products were treated by immersion in 500 IU/ml nisin solution and heat processed (an 8-D process without nisin or a 4-D process with 500 IU/ml nisin) in a newly developed radio frequency (RF; 27 MHz) heating method at 60, 63, and 65 degrees C. RF heating along with nisin acted synergistically to inactivate L. innocua cells and total mesophilic microorganisms. In the RF-nisin treatment at 65 degrees C, no surviving L. innocua microbes were recovered in sturgeon caviar or ikura. The come-up times in the RF-heated product were significantly lower compared with the water bath-heated caviar at all treatment temperatures. The visual quality of the caviar products treated by RF with or without nisin was comparable to the untreated control.