An in vitro cyclic fatigue resistance comparison of conventional and new generation nickel-titanium rotary files

Root Canal Instrumentation: Current Trends and Future Perspectives

The evolution of root canal instrumentation techniques has significantly impacted the field of endodontics, enhancing both the efficiency and outcomes of treatments. This review outlines the transition from manual to mechanical and rotary instruments, highlighting the role of nickel-titanium (NiTi) alloys and smart technologies in advancing procedural precision and reducing patient discomfort. Key historical developments and technological innovations, such as digital imaging and navigation systems, are explored for their contributions to improved clinical outcomes and patient satisfaction. Additionally, the review addresses the challenges presented by the complex anatomy of the root canal system and the advent of current instrumentation techniques. The potential of emerging trends, including artificial intelligence and advances in materials science, is discussed in the context of future endodontic practices. Despite the progress, challenges related to using advanced instrumentation methods, ethical considerations, and the cost factor of new technologies persist. The present review underscores the ongoing need for research and development to further refine root canal instrumentation techniques, ensuring that advancements in endodontic care remain patient-centered and accessible.

Assessment of the Cyclic Fatigue Performance of the Novel Protaper Ultimate File System Used in Different Kinematics: An In Vitro Study

This in vitro study aims to assess the cyclic fatigue resistance of the Protaper Ultimate (PTU) files compared to the Protaper Gold (PTG) and the M3 UDG (M3) files using various motion kinematics in simulated canals. As far as the authors are aware, no study has previously compared the three file systems before this current investigation. Therefore, closing this information gap is the goal of the current research. Methods: A total of (60 new endodontic files were randomly divided into 6 groups (10 files per group); groups 1, 3, and 5 used continuous rotation (CR), while groups 2, 4, and 6 used forward reciprocating motion (FRM). A manufactured stainless-steel artificial canal was used to perform the cyclic fatigue testing. The results were analyzed using Student's t-test and two-way ANOVA. All pairwise comparisons revealed statistically significant differences in the time to failure (TTF) for every study group (p < 0.001), with the exception of the PTG and M3 files, which performed similarly using both CR and FRM. Conclusions: The PTU files performed better than the PTG and M3 files in terms of the TTF and number of cycles to failure (NCF) using both CR and FRM.

Three-Dimensional Evaluation of the Root Apex of Permanent Maxillary Premolars: A Multicentric Study

Aim: Modern endodontics has advanced radically in the recent years, and recently, it has been focused on the concept of mini-invasive treatments. This study aimed to evaluate the sections of the root apices at 1 mm from the radiographic apex using a high-resolution CBCT. Materials and Methods: The current study was performed in three different dental centers. One hundred maxillary permanent premolars (50 first and 50 s premolars) were analyzed using measurement software of the CBCT radiographic pictures. The mesio-distal (M-D) and bucco–palatal (B-P) sections were measured at 1 mm from the radiographic apex of each root. The section of 0.3 mm or less, 1 mm from the anatomical apex of the upper premolars, was decided as the limit value. All values were statistically analyzed. Results: The mean value in the 304 sections analyzed was 1.03 (±0.37). Only 19 sections (6.3%) had measurements less than or equal to 0.3 mm. All these 19 sections were from first premolars (p = 0.002). Conclusions: Based on the data obtained, the authors recommend performing conservative shaping when endodontically treating first maxillary premolars, especially when a pre-operative CBCT to evaluate the actual apical dimensions cannot be acquired.

The Influence of NiTi Alloy on the Cyclic Fatigue Resistance of Endodontic Files

Background: The aim of this study was to analyze the influence of NiTi alloy in endodontic rotary instruments on cyclic fatigue resistance. Methods: One hundred and sixty-four (164) sterile endodontic rotary files were selected and distributed into the following study groups: A: 25.08 F2 ProTaper Universal (PTU) (n = 41); B: 25.06 X2 ProTaper Next (PTN) (n = 41); C: 25.08 F2 ProTaper Gold (PTG) (n = 41), and D: 25.06 ProFile Vortex Blue (PVB) (n = 41). A cyclic fatigue device was designed to conduct the static cyclic fatigue tests with stainless steel artificial root canals systems with 250 µm apical diameter, 60° curvature angle, 5 mm radius of curvature, 20 mm length, and 6% (25.06) and 8% taper (25.08). Failure of the endodontic rotary instrument was detected by a single operator through direct observation and was also filmed to allow measurement of the exact time to failure. Results were analyzed using the ANOVA test and Weibull statistical analysis. Results: All pairwise comparisons presented statistically significant differences between the time to failure for the NiTi alloy study groups (p < 0.001), except between the PTN and PVB study groups (p = 0.379). In addition, statistically significant differences between the number of cycles to failure for the NiTi alloy study groups (p < 0.001) were also observed. Conclusions: The NiTi CM-Gold wire alloy of the ProTaper Gold endodontic rotary files resulted in greater resistance to cyclic fatigue than ProFile Vortex Blue, ProTaper Next, and ProTaper Universal endodontic rotary files.

Nickel-Titanium Rotary File Systems: What's New?

Ever since their introduction, nickel–titanium (NiTi) alloys have continued to revolutionize the field of endodontics. They have considerable advantages over the conventional stainless steel file in terms of mechanical properties. However, despite of their superior mechanical properties, NiTi alloys still pose some risk of fracture. Consequently, there has been considerable research conducted to investigate the mechanisms behind the occurrence of these procedural errors. Since the last decade, different proprietary processing procedures have been introduced to further improve the mechanical properties of NiTi alloys. These treatments include thermal, mechanical, electropolishing, and recently introduced electric discharge machining. The main purpose of these treatments is to impart a more martensitic phase into the files at normal body temperature, so that the maximum advantage of flexibility can be obtained. These heat-treated instruments also possess improved cyclic fatigue resistance when compared to conventional NiTi alloys. NiTi alloys can be subclassified as the instruments mainly containing austenitic phase (conventional NiTi, M-wire, R-phase), and those containing martensitic phase (controlled memory wire, ProTaper Gold, and Vortex Blue). Instruments based on austenitic alloys possess superelastic properties due to the stress-induced martensitic transformation. Contrary to this, martensitic alloys can easily be deformed due to phase transformation, and they can demonstrate the shape memory effect when heated. This review discusses the different phase transformations and heat treatments that the NiTi instruments undergo.