Assessment and comparison of radiation dose and image quality in multi-detector CT scanners in non-contrast head and neck examinations

Comparison of doses received from non-contrast enhanced brain CT examinations between two CT scanners

Objectives

Medical devices based on X-ray imaging, such as computed tomography, are considered notable sources of artificial radiation. The aim of this study was to compare the computed tomography dose volume index, the dose length product, and the effective dose of the brain non-contrast enhanced examination on two CT scanners to determine the current state in terms of radiation doses, compare doses to the reference values, and possibly optimize the examination.

Materials and methods

Data from January 2020 to the second half of 2021 were retrospectively obtained by accessing dose reports from the Picture Archiving and Communication System (PACS). Data were collected and analyzed in Microsoft Excel. The effective dose was estimated using the dose-length product parameter and the normalized conversion factor for a given anatomical region. For statistical analysis, a two-sample t-test was used.

Results

The first data set consists of 200 patients (100 and 100 for older and newer CT scanners) regardless of the scan technique; the average CTDIvol and DLP for the older CT scanner were 57.61 ± 2.89 mGy and 993.28 ± 146.18 mGy cm, and for the newer CT scanner, 43.66 ± 11.15 mGy and 828.14 ± 130.06 mGy cm. The second data set consists of 100 patients (50 for the older CT scanner and 50 for the newer CT scanner) for a sequential scan; the average CTDIvol and DLP for the older CT scanner were 58.63 ± 3.33 mGy and 949.42 ± 80.87 mGy.cm, and for the newer CT, 57.25 ± 3.4 mGy and 942.13 ± 73.05 mGy cm. The third data set consists of 40 patients (20 and 20 for older and newer CT scanners) for the helical scan - the average CTDIvol and DLP for the older CT scanner were 54.6 ± 0 mGy and 1252.2 ± 52.11 mGy.cm, and for the newer CT, 37.18 ± 2.52 mGy and 859.66 ± 72.04 mGy cm. The difference between the older and newer CT scanners in terms of dose reduction was approximately 30 % in favor of the newer scanner for noncontrast enhanced brain examinations performed using the helical scan technique.

Conclusion

A non-contrast enhanced brain examination scanned with newer CT equipment was associated with a lower radiation burden on the patient.

Trade-off between the radiation parameters and image quality using iterative reconstruction techniques in head computed tomography: a phantom study

BACKGROUND

Iterative reconstruction techniques (IRTs) are commonly used in computed tomography (CT) and help to reduce image noise.

PURPOSE

To determine the minimum radiation dose while preserving image quality in head CT using IRTs.

MATERIAL AND METHODS

The anthropomorphic phantom was used to scan nine head CT image series with varied radiation parameters. CT dose parameters, including volume CT dose index (CTDIvol [in mGy]) and dose length product (DLP [in mGy/cm]), were recorded for each scan series. Different noise levels (iDoseL1-6) were used in IRT reconstructions for soft and bone tissues. In total, 15 measurements were taken from five regions of interest (ROI) with an area of 10 mm2. The signal-to-noise ratio (SNR) and noise values obtained at different ROIs were compared among various reconstruction methods with repeated measures of statistical analysis.

RESULTS

In the head CT scan, applying IRT iDoseL5 had the lowest noise and highest SNR for soft tissue (P < 0.05), and increased iDose can decrease CT dose by 54.6% without compromising image quality. While for bone tissue reconstruction, no clear association was found between the level of iDose and noise. However, when CTDIvol is >20 mGy, iDoseL4 is slightly superior to other reconstruction methods (P < 0.065).

CONCLUSION

Using IRTs in head CTs reduces radiation dose while maintaining image quality. IDoseL5 provided optimal balance for soft tissue.

Energy-efficient high-fidelity image reconstruction with memristor arrays for medical diagnosis

Medical imaging is an important tool for accurate medical diagnosis, while state-of-the-art image reconstruction algorithms raise critical challenges in massive data processing for high-speed and high-quality imaging. Here, we present a memristive image reconstructor (MIR) to greatly accelerate image reconstruction with discrete Fourier transformation (DFT) by computing-in-memory (CIM) with memristor arrays. A high-accuracy quasi-analogue mapping (QAM) method and generic complex matrix transfer (CMT) scheme was proposed to improve the mapping precision and transfer efficiency, respectively. High-fidelity magnetic resonance imaging (MRI) and computed tomography (CT) image reconstructions were demonstrated, achieving software-equivalent qualities and DICE scores after segmentation with nnU-Net algorithm. Remarkably, our MIR exhibited 153× and 79× improvements in energy efficiency and normalized image reconstruction speed, respectively, compared to graphics processing unit (GPU). This work demonstrates MIR as a promising high-fidelity image reconstruction platform for future medical diagnosis, and also largely extends the application of memristor-based CIM beyond artificial neural networks.

DEVELOPING DIAGNOSTIC REFERENCE LEVELS FOR CT EXAMINATIONS IN ADDIS ABABA, ETHIOPIA

Diagnostic reference level (DRL) is an appropriate instrument toward promoting radiation doses optimisation in medical imaging. The goal of this research is developing DRL to optimise computed tomography (CT) doses in patient examination. Parameters were collected in CT facilities for common procedures such as head, chest, pelvic and cervical spine (c-spine) imaging. The dose descriptors considered were volume computed tomography dose index (CTDIv) and dose length product (DLP). The DRLs were proposed at 75th percentile CTDIv for head (without and with contrast materials), chest (without and with contrast materials), pelvic and c-spine only without contrast materials; their values were 52, 52, 17, 14, 14 and 38 mGy, respectively. Whereas, DLP values for the aforementioned protocols were 1237, 1459, 625, 565, 605 and 1106 mGy.cm, respectively. This study fruitfully developed the DRLs for head, chest, pelvic and c-spine and can be accepted for clinical purposes.

Trade-off between breast dose and image quality using composite bismuth shields in computed tomography: A phantom study

INTRODUCTION

Many researchers have suggested that bismuth composite shields (BCS) reduce breast dose remarkably; however, the level of this reduction and its impact on image quality has not been assessed. This study aimed to evaluate the efficiency of nano- and micro- BCS in reducing the dose and image quality during chest computed tomography (CT) scans.

MATERIALS AND METHODS

Bismuth shields composed of 15 weighting percentage (wt%) and 20 wt% bismuth oxide (Bi₂O₃) nano- and micro-particles mixed in silicon rubber polymer were constructed in 1 and 1.5 mm thicknesses. The physical properties of nanoparticles were assessed using a scanning electron microscope (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray (EDX). Breast radiation doses were measured experimentally during chest CT using PMMA standard dosimetry phantom (body phantom, 76-419-4150, Fluke Biomedical) in the presence of the shields. The image quality was assessed by calculating signal and noise values in different regions.

RESULTS

The SEM images showed that the average size of Bi₂O₃ nano- and micro-particles was about 70 nm and 150 μm, respectively. The breast doses were reduced by increasing the shield thickness/bismuth weight percentage. The maximum dose reduction was related to the 20% weight of Bi₂O₃ nano-particles and a thickness of 1.5 mm. The minimum dose reduction was related to the 15% weight of Bi₂O₃ micro-particles with a thickness of 1 mm. The mean noise was higher in nano-particle bismuth shields than in micro-particles.

CONCLUSION

Composite shields containing bismuth nano- and micro-particles can reduce the breast dose during chest CT examinations while negatively impacting diagnostic image quality. Several critical factors, such as bismuth concentration, particle size, and shield thickness, directly affect the efficiency.

PHANTOM EXPERIMENTAL STUDY ON PATIENT DOSES OBTAINED FROM 320-MULTIDETECTOR-ROW COMPUTED TOMOGRAPHY IN WHOLE-BRAIN PERFUSION SCAN

This study aimed to precisely evaluate organ dose and effective dose (E) obtained from a 320-multidetector-row computed tomography (CT) scanner in brain perfusion scans and to estimate the conversion factor (k) between E and dose length product (DLP). A total of 270 thermoluminescent dosemeters were implanted in a male anthropomorphic phantom to measure air kerma. The ratios of mass-energy absorption coefficients were used to convert air kerma into organ doses. The organ doses ranged from 0.01 to 150 mGy. Doses in brain, salivary glands and red bone marrow were relatively high, and dose in eye lens reached about 110 mGy. The resulting effective dose was 5.30 mSv. The resulting conversion factor k = (0.0022 ± 0.0002) mSv·(mGy·cm)-1 was not significantly different from that of 0.0021 mSv·(mGy·cm)-1 reported for head CT scan in ICRP Publication 102.

Dental imaging using an ultra-high resolution photon-counting CT system

Clinical photon-counting CT (PCCT) offers a spatial resolution of about 200 µm and might allow for acquisitions close to conventional dental CBCTs. In this study, the capabilities of this new system in comparison to dental CBCTs shall be evaluated. All 8 apical osteolysis identified in CBCT were identified by both readers in all three PCCT scan protocols. Mean visibility scores showed statistical significant differences for root canals(p = 0.0001), periodontal space(p = 0.0090), cortical(p = 0.0003) and spongious bone(p = 0.0293) in favor of high and medium dose PCCT acquisitions. Overall, both devices showed excellent image quality of all structures assessed. Interrater-agreement showed high values for all protocols in all structures. Bland-Altman plots revealed a high concordance of both modalities with the reference measurements. In vitro, ultra-high resolution PCCT can reliably identify different diagnostic entities and structures relevant for dental diagnostics similar to conventional dental CBCT with similar radiation dose. Acquisitions of five cadaveric heads were performed in an experimental CT-system containing an ultra-high resolution PC detector (0.25 mm pixel size in isocenter) as well as in a dental CBCT scanner. Acquisitions were performed using dose levels of 8.5 mGy, 38.0 mGy and 66.5 mGy (CTDI16cm) in case of PCCT and of 8.94 mGy (CTDI16cm) in case of CBCT. The quality of delineation of hard tissues, root-canals, periodontal-space as well as apical osteolysis was assessed by two readers. Mean visibility scores and interrater-agreement (overall agreement (%)) were calculated. Vertical bone loss (bl) and thickness (bt) of the buccal bone lamina of 15 lower incisors were measured and compared to reference measurements by ore microscopy and clinical probing.

COMPARISON OF RADIATION DOSE AND IMAGE QUALITY IN HEAD CT SCANS AMONG MULTIDETECTOR CT SCANNERS

The present study compares three different multidetector CT (MDCT) scanners for routine brain imaging in terms of image quality and radiation doses. The volume CT dose index (CTDIvol), dose-length product (DLP), and effective dose (E) were calculated. Subjective image assessment was obtained based on a scale ranging from 1 (unacceptable) to 5 (optimum). All images scored 3.5 or over, with the 160-slice MDCT images being favoured. For the 4-, 16- and 160-slice MDCT scanners, the respective median values for CTDIvol were 57 mGy, 41 mGy, and 28 mGy; DLP values were 901 mGy.cm, 680 mGy.cm, and 551 mGy.cm; and effective doses were 2 mSv, 1.5 mSv, and 1 mSv, respectively. Compared to the 160-slice MDCT, the dose values for the 4- and 16-slice units were significantly greater. In practice, the CT modality used must be carefully selected to avoid elevated radiation doses and maintain image quality.

Can leaded glasses protect the eye lens in patients undergoing neck computed tomography?

BACKGROUND AND AIMS

Computed tomography (CT) is one of the main sources using ionizing radiation. Considering the toxicity from this radiation, any technique that could reduce the radiosensitive organs' doses without affecting the image diagnostic quality must be considered in routine practice. In this study, the amount of eye lens dose reduction in the presence of radioprotective glasses was evaluated in neck CT examinations.

METHODS

Thirty adult patients (15 men and 15 women) with a mean age of 44.6 years undergoing neck CT examination participated in this study. For each patient, six thermoluminescent dosimeters (TLDs-100) were attached above the eye lens glasses surface, and another six under the glasses to assess the radioprotective effect of the glasses. The TLDs were readout and converted to Hp (3) as an indicator of eye lens dose. The obtained results from the TLD readouts as eye lens dose were compared using a paired t-test.

RESULTS

The TLD measurements showed the mean±standard deviation values of 2.97±0.61 mGy and 1.04±0.16 mGy for TLDs above and under the radioprotective glasses, respectively. The radioprotective glasses significantly decreased the eye lens dose by about 64.9% (P=0.001).

CONCLUSIONS

Due to the results, wearing radioprotective glasses for patients during neck CT scans could significantly reduce the eye lens doses.

RELEVANCE FOR PATIENTS

The outcome of this research shows that leaded glasses can decrease the received dose significantly in patient during neck CT scans.

ESTIMATION OF DIAGNOSTIC REFERENCE LEVELS AND ACHIEVABLE DOSES FOR PEDIATRIC PATIENTS IN COMMON COMPUTED TOMOGRAPHY EXAMINATIONS: A MULTI-CENTER STUDY

This study was conducted to determine first local diagnostic reference levels (DRLs) and achievable doses (ADs) for pediatric patients during the most common computed tomography (CT) procedures in Yazd province. The DRL was obtained based on volume CT dose index (CTDIvol) and dose length product (DLP) for four various age groups of children. Data were collected from the most commonly performed pediatric CT scans, including abdomen-pelvis, chest, brain and sinus examinations, at six high-loaded institutes. The patients' data (766 no.) in terms of CTDIvol and DLP were obtained from four age groups: ≤1-, 1-5-, 5-10- and 10-15-y-old. The 75th percentiles of CTDIvol and DLP were considered as DRL values and the 50th percentiles were described as ADs for those parameters. Consequently, the acquired DRLs were compared with other national and international published values. The DRLs in terms of CTDIvol for abdomen-pelvis, chest, brain and sinus examinations were 3, 8, 9 and 10 mGy; 4, 5, 5 and 5 mGy; 25, 28, 29 and 38 mGy; and 23, 24, 26 and 27 mGy for four different age groups of ≤1-, 1-5-, 5-10- and 10-15-y-old, respectively. The DRL values in terms of DLP were 75, 302, 321 and 342 mGy.cm; 109, 112, 135 and 170 mGy.cm, 352, 355, 360 and 481 mGy.cm; and 206, 211, 228 and 245 mGy.cm, respectively, for the mentioned age groups. In this study, the DRL and AD values in the brain examination were greater among the other studied regions. The DRL plays a critical role in the optimization of radiation doses delivered to patients and in improving their protection. This study provides the local DRLs and ADs for the most common pediatric CT scanning in Yazd province to create optimum situation for the clinical practice.

Can Common Lead Apron in Testes Region Cause Radiation Dose Reduction during Chest CT Scan? A Patient Study

BACKGROUND

Computed tomography (CT) is a routine procedure for diagnosing using ionization radiation which has hazardous effects especially on sensitive organs.

OBJECTIVE

The aim of this study was to quantify the dose reduction effect of lead apron shielding on the testicular region during routine chest CT scans.

MATERIAL AND METHODS

In this measurement study, the routine chest CT examinations were performed for 30 male patients with common lead aprons folded and positioned in testis regions. The patient's mean body mass index (BMI) was 26.2 ± 4.6 kg/m2. To calculate the doses at testis region, three thermoluminescent dosimeters (TLD-100) were attached at the top surface of the apron as an indicator of the doses without shielding, and three TLDs under the apron for doses with shielding. The TLD readouts were compared using SPSS software (Wilcoxon test) version 16.

RESULTS

The radiation dose in the testicular regions was reduced from 0.46 ± 0.04 to 0.20 ± 0.04 mGy in the presence of lead apron shielding (p < 0.001), the reduction was equal to 56%. Furthermore, the heritable risk probability was obtained at 2.0 ×10-5 % and 4.6 ×10-5 % for the patients using the lead apron shield versus without shield, respectively.

CONCLUSION

Applying common lead aprons as shielding in the testis regions of male patients undergoing chest CT scans can reduce the radiation doses significantly. Therefore, this shield can be recommended for routine chest CT examinations.

Computed tomography diagnostic reference levels for adult brain, chest and abdominal examinations: A systematic review

OBJECTIVES

Radiation dose variation within and among Computed Tomography (CT) centres is commonly reported. This work systematically reviewed published articles on adult Diagnostic Reference Levels (DRLs) for the brain, chest and abdomen to determine the causes and extent of variation. A systematic literature search and review was performed in selected databases containing leading journals in radiography, radiology and medical physics using carefully defined search terms related to CT and DRLs. The quality of the included articles was determined using the Effective Public Health Practise Project tool for quantitative studies.

KEY FINDINGS

The 54 articles reviewed include: 45 studies using human data, 8 studies using phantom data, and one study with both human and phantom data. The main comparator in between studies was the dose indices used in reporting DRLs. DRL variations of up to a factor of 2 for the same procedure were noted in phantom studies, and up to a factor of 3 in human studies. Sources of variation include the type of scanner, the age of the scanner, differences in protocols, variations in patients, as well as variations in study design. Different combinations of dose indices were reported: volume computed tomography dose index (CTDIvol) and dose length product (DLP) (59%); DLP only (11%); weighted computed tomography dose index (CTDIw) and DLP (9%); CTDIvol only (7%); CTDIvol, DLP and effective dose (ED) (6%); CTDIw only (4%); CTDIvol, DLP and size specific dose estimate (SSDE) (1%) and CTDIw, CTDIvol and DLP (1%). The use of different dose indices limited dose comparison between studies.

CONCLUSION

The study noted a 2-3 fold variation in DRLs between studies for the same procedure. The causes of variation are reported and include study design, scanner technology and the use of different dose indices.

IMPLICATIONS FOR PRACTICE

There is a need for standardisation of CT DRLs in line with the International Commission on Radiological Protection recommendations to reduce dose variation and facilitate dose comparison.

A review on chest CT scanning parameters implemented in COVID-19 patients: bringing low-dose CT protocols into play

Background

This study aims to review chest computed tomography (CT) scanning parameters which are utilized to evaluate patients for COVID-19-induced pneumonia. Also, some of radiation dose reduction techniques in CT would be mentioned, because using these techniques or low-dose protocol can decrease the radiation burden on the population.

Main body

Chest CT scan can play a key diagnostic role in COVID-19 patients. Additionally, it can be useful to monitor imaging changes during treatment. However, CT scan overuse during the COVID-19 pandemic raises concerns about radiation-induced adverse effects, both in patients and healthcare workers.

Conclusion

By evaluating the CT scanning parameters used in several studies, one can find the necessity for optimizing these parameters. It has been found that chest CT scan taken using low-dose CT protocol is a reliable diagnostic tool to detect COVID-19 pneumonia in daily practice. Moreover, the low-dose chest CT protocol results in a remarkable reduction (up to 89%) in the radiation dose compared to the standard-dose protocol, not lowering diagnostic accuracy of COVID-19-induced pneumonia in CT images. Therefore, its employment in the era of the COVID-19 pandemic is highly recommended.

Assessment of patient dose and noise level of clinical CT images: automated measurements

We investigated comparisons between patient dose and noise in pelvic, abdominal, thoracic and head CT images using an automatic method. 113 patient images (37 pelvis, 34 abdominal, 25 thoracic, and 17 head examinations) were retrospectively and automatically examined in this study. Water-equivalent diameter (Dw), size-specific dose estimates (SSDE) and noise were automatically calculated from the center slice for every patient image. The Dw was calculated based on auto-contouring of the patients' edges, and the SSDE was calculated as the product of the volume CT dose index (CTDIvol) extracted from the Digital Imaging and Communications in Medicine (DICOM) header and the size conversion factor based on the Dw obtained from AAPM 204. The noise was automatically measured as a minimum standard deviation in the map of standard deviations. A square region of interest of about 1 cm² was used in the automated noise measurement. The SSDE values for the pelvis, abdomen, thorax, and head were 21.8 ± 7.3 mGy, 22.0 ± 4.5 mGy, 21.5 ± 4.7 mGy, and 65.1 ± 1.7 mGy, respectively. The SSDEs for the pelvis, abdomen, and thorax increased linearly with increasing Dw, and for the head with constant tube current, the SSDE decreased with increasing Dw. The noise in the pelvis, abdomen, thorax, and head were 5.9 ± 1.5 HU, 5.2 ± 1.4 HU, 4.9 ± 0.8 HU and 3.9 ± 0.2 HU, respectively. The noise levels for the pelvis, abdomen, and thorax of the patients were relatively constant with Dw because of tube current modulation. The noise in the head image was also relatively constant because Dw variations in the head are very small. The automated approach provides a convenient and objective tool for dose optimizations.