MRI traceability of superparamagnetic iron oxide nanoparticle-embedded chitosan microspheres as an embolic material in rabbit uterus

Rethinking the application of nanoparticles in women's reproductive health and assisted reproduction

Nanoparticles and nanotechnology may present opportunities to revolutionize the prevention, treatment and diagnosis of a range of reproductive health conditions in women. These technologies are also used to improve outcomes of assisted reproductive technology. We highlight a range of these potential clinical uses of nanoparticles for polycystic ovary syndrome, endometriosis, uterine fibroids and sexually transmitted infections, considering in vitro and in vivo studies along with clinical trials. In addition, we discuss applications of nanoparticles in assisted reproductive technology, including sperm loading, gamete and embryo preservation and preventing preterm birth. Finally, we present some of the concerns associated with the medical use of nanoparticles, identifying routes for further exploration before nanoparticles can be applied to women's reproductive health in the clinic.

Microfluidic-based fabrication and characterization of drug-loaded PLGA magnetic microspheres with tunable shell thickness

To overcome the shortcoming of conventional transarterial chemoembolization (cTACE) like high systemic release, a novel droplet-based flow-focusing microfluidic device was fabricated and the biocompatible poly(lactic-co-glycolic acid) (PLGA) magnetic drug-eluting beads transarterial chemoembolization (TACE) microspheres with tunable size and shell thickness were prepared via this device. Paclitaxel, as a model active, was loaded through O/O/W emulsion method with high efficiency. The size and the shell thickness vary when adjusting the flow velocity and/or solution concentration, which caters for different clinical requirements to have different drug loading and release behavior. Under the designed experimental conditions, the average diameter of the microspheres is 60 ± 2 μm and the drug loading efficiency has reached 6%. The drug release behavior of the microspheres shows the combination of delayed release and smoothly sustained release profiles and the release kinetics differ within different shell thickness. The microspheres also own the potential of magnetic resonance imaging (MRI) visuality because of the loaded magnetic nanoparticles. The microsphere preparation method and device we proposed are simple, feasible, and effective, which have a good application prospect.

In vitro and in vivo uterine metabolic disorders induced by silica nanoparticle through the AMPK signaling pathway

Exposure to silica nanoparticles (SiNPs) has been suggested to cause physical disorders, yet the effects of SiNPs on female reproduction have not been illustrated. This study was implemented to explore the reproductive toxicity of SiNPs on female and reveal its underlying mechanisms. Methodologically, the fluorescein isothiocyanate (FITC)-SiNPs were synthesized by coupling with FITC and then used to track the biodistribution of SiNPs in vitro and in vivo. In total, 30 mice were intratracheally injected 0.25 g of FITC-SiNPs, and 6 mice injected with the same volume of saline were used as controls. The results showed that SiNPs penetrated the cellular membrane, triggering apoptosis and inhibiting proliferation, tube formation, and invasion of trophoblast. Mechanistically, SiNPs was demonstrated to dysregulate Fbp2, Cpt1a, Scd1, and Pfkl, and further induced accumulation of pyruvate and fatty acid in mitochondria through the AMPK signaling pathway, which finally activated the Caspase-3-dependent apoptosis. Consistently, the similar alterations of these genes were detected in vivo, and the uterine inflammatory infiltration aggravated with the extension of the observation duration. These results suggested that SiNPs induced trophoblast apoptosis and uterine inflammation, and ultimately caused acute reproductive toxicity on female. The underlying mechanism might be explained by the dysregulation of Fbp2/Cpt1a/Pfkl/Scd1 axis, which promoted the overload of glucose and lipid through the AMPK signaling pathway. These findings were of great significance to guide a comprehensive understanding of the reproductive toxicity of SiNPs as well as the development of environmental standards.

Biocompatibility of a New Kind of Polyvinyl Alcohol Embolic Microspheres: In Vitro and In Vivo Evaluation

The aim of this study is to investigate the biocompatibility of polyvinyl alcohol (PVA) embolic microspheres by in vivo and in vitro evaluations. Two specifications of PVA microspheres including colorless microspheres (1 g microspheres with 7 mL 0.9% sodium chloride (SC) per vial, size: 500-700 µm) and blue microspheres (2 g microspheres with 7 mL 0.9% SC per vial, size: 500-700 µm) were assessed for biocompatibility. The vitro cytotoxicity was evaluated in L929 cells by MTT assay. Acute systemic toxicity and 28-repeat dose intravenous subchronic toxicity were assessed in 20 ICR mice and 40 SD rates, respectively. Skin sensitization was conducted in 30 adult albino guinea pigs by maximization test, in addition, intracutaneous reaction test was performed in New Zealand white rabbits. Hemolysis ratio of PVA microspheres was evaluated with rabbit blood. Moreover, test for genotoxicity was assessed by bacterial reverse mutation test and mouse lymphoma mutagenesis assay. No cytotoxicity, hemolysis, or acute toxicity of PVA microspheres was found, and slight fluctuations of biochemical indexes were observed in test of 28-day repeat dose intravenous subchronic toxicity, while these changes remained within our historical permitted range. Maximization test and intracutaneous reactivity test disclosed no irritation to skin or tissues. According to bacterial reverse mutation test and mouse lymphoma mutagenesis assay, no genotoxicity of PVA microspheres was observed. PVA microspheres showed excellent biocompatibility both in vivo and in vitro, and they were promising embolic materials for drug-eluting beads transarterial chemoembolization (DEB-TACE) therapy.

MRI Detectable Polymer Microspheres Embedded With Magnetic Ferrite Nanoclusters For Embolization: In Vitro And In Vivo Evaluation

OBJECTIVE

The objective of this study was to develop magnetic embolic microspheres that could be visualized by clinical magnetic resonance imaging (MRI) scanners aiming to improve the efficiency and safety of embolotherapy.

METHODS AND DISCUSSION

Magnetic ferrite nanoclusters (FNs) were synthesized with microwave-assisted solvothermal method, and their morphology, particle size, crystalline structure, magnetic properties as well as T2 relaxivity were characterized to confirm the feasibility of FNs as an MRI probe. Magnetic polymer microspheres (FNMs) were then produced by inverse suspension polymerization with FNs embedded inside. The physicochemical and mechanical properties (including morphology, particle size, infrared spectra, elasticity, etc.) of FNMs were investigated, and the magnetic properties and MRI detectable properties of FNMs were also assayed by vibrating sample magnetometer and MRI scanners. Favorable biocompatibility and long-term MRI detectability of FNMs were then studied in mice by subcutaneous injection. FNMs were further used to embolize rabbits' kidneys to evaluate the embolic property and detectability by MRI.

CONCLUSION

FNMs could serve as a promising MRI-visualized embolic material for embolotherapy in the future.

One-step preparation of nano-in-micro poly(vinyl alcohol) embolic microspheres and used for dual-modal T1/T2-weighted magnetic resonance imaging

It is crucial to develop dual or multi-modal self-imaging embolic microspheres to evaluate the effects of transcatheter arterial embolization therapy of tumor. However, the preparation of such hybrid microspheres always involved in multiple steps or complicated conditions. Here, poly(vinyl alcohol) (PVA) hybrid microspheres with dual-modal T₁/T₂-weighted magnetic resonance imaging (MRI) have been prepared based on microfluidic technique in one step. Gd₂O₃ and Fe₃O₄ nanoparticles with a size of ~5 nm act as T₁- and T₂-weighted MRI contrast agents, respectively, which are simultaneously in-situ synthesized in the PVA matrix via the reaction of metal ions and alkali with PVA chains as a soft template. Meanwhile, these metallic-oxide nanoparticles act as cross-linker to gelatinize the PVA droplets to obtain nano-in-micro PVA microspheres in one step. This procedure is simple, economic and feasible. The obtained nano-in-micro PVA microspheres show good magnetothermal effect, enhanced T₁- and T₂-weighted MRI and embolization effect.

Chitosan-Based Hydrogel Microparticles for Treatment of Carcinoma in a Rabbit VX2 Liver Tumor Model

PURPOSE

To investigate potential of chitosan hydrogel microparticles (CHI) for treatment of VX2 carcinoma.

MATERIALS AND METHODS

Two weeks after liver VX2 implantation, contrast-enhanced computerized tomographic scanning was conducted. Rabbits (n = 2) with successful tumor growth were treated with different sizes of ^99mTc-labeled CHI (60-80 μm and 100-120 μm) via intra-arterial hepatic catheterization. Liver distribution of ^99mTc-labeled CHI was determined by means of autoradiography, a radiation-based photographic technique. In the next part of this study, therapeutic effectiveness was examined with the use of CHI with the size range of 60-80 μm (n = 11). Tumor growth response and levels of blood liver enzymes were studied at baseline and 1 and 2 weeks after CHI treatment.

RESULTS

Successful tumor growth was confirmed in all rabbits (24/24). Intrahepatic CHI with the size range of 60-80 μm resulted in liver localization in more close proximity to tumor nodule versus 100-120 μm. Baseline tumor volume was 1,909 ± 575 mm³ in animals receiving CHI versus 1,831 ± 249 mm³ in control animals (P = .342). In control animals, tumor volume markedly increased by 1,544 ± 512% at 2 weeks after sham operation versus baseline. In animals receiving CHI, tumor volume remained relatively unchanged (54 ± 6% increase; P = .007 vs control). Levels of blood aspartate transaminase (AST) and alanine transaminase (ALT) in animals receiving CHI increased 1 week after treatment (P = .032 vs control for AST; P = .000 vs control for ALT), but returned to control levels at 2 weeks.

CONCLUSIONS

CHI embolization suppressed tumor growth without appreciable damages in liver function.

Magnetic alginate microspheres detected by MRI fabricated using microfluidic technique and release behavior of encapsulated dual drugs

Alginate microspheres loaded with superparamagnetic iron oxide nanoparticles (SPIO NPs) have been fabricated by a T-junction microfluidic device combined with an external ionic crosslinking. The obtained microspheres possess excellent visuality under magnetic resonance due to the presence of only 0.6 mg/mL SPIO NPs. The microspheres also show uniform size with narrow distribution and regular spherical shape characterized by optic microscope and environmental scanning electron microscope. Furthermore, dual drugs (5-fluorouracil and doxorubicin hydrochloride) have been loaded within the microspheres. The release behavior of dual drugs from the microspheres show typical sustained release profiles. As a novel embolic agent, such microspheres in blood vessels can be tracked by magnetic resonance scanner. Thus, the integration of embolotherapy, chemotherapy, and postoperative diagnosis can be realized.

Remote controlled drug release from multi-functional Fe3O4/GO/Chitosan microspheres fabricated by an electrospray method

The construction of multifunctional microspheres for remote controlled drug release requires the exquisite selection of composite materials and preparation approaches. In this study, chitosan, an amino polysaccharide, was blended with inorganic nanocomponents, Fe₃O₄ and graphene oxide (GO) and electrosprayed to fabricate uniform microspheres with the diameters ranging from 100μm to 1100μm. An anti-cancer drug, doxorubicin (DOX), was loaded to the microspheres by an adsorption or embedding method. The microsphere is responsive to magnetic fields due to the presence of Fe₃O₄, and the incorporation of GO enhanced the drug loading capacity. The fast stimuli-responsive release of DOX can be facilely controlled by using NIR irradiation due to the strong photo-thermal conversion of Fe₃O₄ and GO_. In addition, ultrasound was used as another external stimulus for DOX release. The results suggest the Fe₃O₄/GO/Chitosan microspheres fabricated by the electrospray method provide an efficient platform for remote controlled drug release, which may have potential applications in drug eluting microspheres.