Purification and characterization of heparin lyase I from Bacteroides stercoris HJ-15

A highly active heparinase I from Bacteroides cellulosilyticus: Cloning, high level expression, and molecular characterization

As one of the most extensively studied glycosaminoglycan lyases, heparinase I has been used in producing low or ultra-low molecular weight heparin. Its' important applications are to neutralize the heparin in human blood and analyze heparin structure in the clinic. However, the low productivity and activity of the enzyme have greatly hindered its applications. In this study, a novel Hep-I from Bacteroides cellulosilyticus (BcHep-I) was successfully cloned and heterologously expressed in E. coli BL21 (DE3) as a soluble protein. The molecular mass and isoelectric point (pI) of the enzyme are 44.42 kDa and 9.02, respectively. And the characterization of BcHep-I after purified with Ni-NTA affinity chromatography suggested that it is a mesophilic enzyme. BcHep-I can be activated by 1 mM Ca2+, Mg2+, and Mn2+, while severely inhibited by Zn2+, Co2+, and EDTA. The specific activity of the enzyme was 738.3 U·mg-1 which is the highest activity ever reported. The Km and Vmax were calculated as 0.17 mg·mL-1 and 740.58 U·mg-1, respectively. Besides, the half-life of 300 min at 30°C showed BcHep-I has practical applications. Homology modeling and substrate docking revealed that Gln15, Lys74, Arg76, Lys104, Arg149, Gln208, Tyr336, Tyr342, and Lys338 were mainly involved in the substrate binding of Hep-I, and 11 hydrogen bonds were formed between heparin and the enzyme. These results indicated that BcHep-I with high activity has great potential applications in the industrial production of heparin, especially in the clinic to neutralize heparin.

Isolation, Purification, and Characterization of Heparinase from Streptomyces variabilis MTCC 12266

Arterial/venous thrombosis is the major cardiovascular disorder accountable for substantial mortality; and the current demand for antithrombotic agents is extensive. Heparinases depolymerize unfractionated heparin (UFH) for the production of low molecular-weight heparins (LMWHs; used as anticoagulants against thrombosis). A microbial strain of Streptomyces sp. showing antithrombotic activity was isolated from the soil sample collected from north India. The strain was characterized by using 16S rRNA homology technique and identified as Streptomyces variabilis MTCC 12266 capable of producing heparinase enzyme. This is the very first communication reporting Streptomyces genus as the producer of heparinase. It was observed that the production of intracellular heparinase was [63.8 U/mg protein (specific activity)] 1.58 folds higher compared to extracellular heparinase [40.28 U/mg protein]. DEAE-Sephadex A-50 column followed by Sepharose-6B column purification of the crude protein resulted 19.18 folds purified heparinase. SDS-PAGE analysis of heparinase resulted an estimated molecular-weight of 42 kDa. It was also found that intracellular heparinase has the ability to depolymerize heparin to generate LMWHs. Further studies related to the mechanistic action, structural details, and genomics involved in heparinase production from Streptomyces variabilis are warranted for large scale production/purification optimization of heparinase for antithrombotic applications.

Crystal structure of a bacterial unsaturated glucuronyl hydrolase with specificity for heparin

Extracellular matrix molecules such as glycosaminoglycans (GAGs) are typical targets for some pathogenic bacteria, which allow adherence to host cells. Bacterial polysaccharide lyases depolymerize GAGs in β-elimination reactions, and the resulting unsaturated disaccharides are subsequently degraded to constituent monosaccharides by unsaturated glucuronyl hydrolases (UGLs). UGL substrates are classified as 1,3- and 1,4-types based on the glycoside bonds. Unsaturated chondroitin and heparin disaccharides are typical members of 1,3- and 1,4-types, respectively. Here we show the reaction modes of bacterial UGLs with unsaturated heparin disaccharides by x-ray crystallography, docking simulation, and site-directed mutagenesis. Although streptococcal and Bacillus UGLs were active on unsaturated heparin disaccharides, those preferred 1,3- rather than 1,4-type substrates. The genome of GAG-degrading Pedobacter heparinus encodes 13 UGLs. Of these, Phep_2830 is known to be specific for unsaturated heparin disaccharides. The crystal structure of Phep_2830 was determined at 1.35-Å resolution. In comparison with structures of streptococcal and Bacillus UGLs, a pocket-like structure and lid loop at subsite +1 are characteristic of Phep_2830. Docking simulations of Phep_2830 with unsaturated heparin disaccharides demonstrated that the direction of substrate pyranose rings differs from that in unsaturated chondroitin disaccharides. Acetyl groups of unsaturated heparin disaccharides are well accommodated in the pocket at subsite +1, and aromatic residues of the lid loop are required for stacking interactions with substrates. Thus, site-directed mutations of the pocket and lid loop led to significantly reduced enzyme activity, suggesting that the pocket-like structure and lid loop are involved in the recognition of 1,4-type substrates by UGLs.

Expression of heparinase I of Bacteroides stercoris HJ-15 and its degradation tendency toward heparin-like glycosaminoglycans

Recombinant heparinase I was cloned from Bacteroides stercoris HJ-15 (BSrhepI), overexpressed in Escherichia coli, and intensively characterized. The complete gene of BSrhepI was identified by Southern blotting, and was overexpressed as an inclusion body. The inclusion body was solubilized with 4 M guanidine-HCl, and the denatured BSrhepI was easily purified using Ni(2+)-affinity column chromatography. The purified but denatured enzyme was then successfully refolded by dialysis against 50 mM Tris-HCl (pH 7.0) containing 1mM DTT and CaCl(2). BSrhepI was most active in 50mM Tris-HCl buffer containing 300 mM NaCl, 10 mM CaCl(2), and 1 mM DTT (pH 7.0) at 37°C. This enzyme digested not only heparin, but also heparan sulfate. Through comparative HPLC-analysis of each degraded product of heparin and heparan sulfate by digestion with BSrhepI or flavobacterial heparinase I, we verified that BSrhepI has a broader spectrum of substrate specificities than other reported heparinases.

Cloning, expression and characterization of acharan sulfate-degrading heparin lyase II from Bacteroides stercoris HJ-15

AIMS

This study focused on the cloning, expression and characterization of recombinant heparinase II (rHepII) from Bacteroides stercoris HJ-15.

METHODS AND RESULTS

The heparinase II gene from Bact. stercoris HJ-15 was identified by Southern blotting and the sequence was deposited in GenBank. The gene was cloned and overexpressed in Escherichia coli, and rHepII was purified using two simple ion-exchange column chromatography steps. Enzymatic properties and substrate specificities of rHepII were assessed and its kinetic constants were calculated. Heparin-like glycosaminoglycans (HLGAGs) were digested with rHepII under optimal reaction conditions, and the products were analysed by SAX-HPLC.

CONCLUSIONS

The heparinase II gene is 2322-bp long and consists of 773 amino acids. rHepII is most active in 50 mmol l(-1) sodium phosphate buffer with 75 mmol l(-1) NaCl (pH 7.4) at 32 degrees C, and the activity is stable at 4 degrees C for 15 days on storage. Acharan sulfate is the best substrate for rHepII, followed by heparan sulfate and heparin. The major degradation products were verified as highly sulfated disaccharides through SAX-HPLC analysis. It means that rHepII prefers iduronic acid over glucuronic acid on the HLGAG structure.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study provides easy and certain means for obtaining large amounts of pure rHepII and also provides important information regarding the tendencies of this enzyme and its digested products. rHepII digests HLGAGs in a different manner than heparinases from Flavobacterium heparinum; therefore, we anticipate that rHepII will be a powerful tool for studies of GAGs and GAGs lyases.

High yield, purity and activity of soluble recombinant Bacteroides thetaiotaomicron GST-heparinase I from Escherichia coli

Heparinase I from Flavobacterium heparinum, a source of diverse polysaccharidases, suffers from low yields, insufficient purity for structural studies and insolubility when expressed as a recombinant product in Escherichia coli that is devoid of glycosaminoglycan polysaccharidases. In this study, cDNA coding for the orthologue of F. heparinum heparinase I was constructed from genomic information from the mammalian gut symbiont Bacteroides thetaiotaomicron and expressed in E. coli as a fusion protein with GST at the N-terminus. This resulted in high yield (30 mg/g dry bacteria) of soluble product and facilitated one-step affinity purification to homogeneity. Purified heparinase I bearing the GST fusion exhibited a K(m) of 2.3 microM and V(max) of 42.7 micromol/min with a specific activity of 164 U/mg with heparin (average 12,000 Da) as substrate. The results indicate a 2-fold improvement in yield, specific activity and affinity for heparin as substrate over previous reports. The data suggest that the heparinase I from the gut symbiont exhibits a higher intrinsic affinity for heparin than that from F. heparinum. The purified GST fusion enzyme exhibited a requirement for Ca(2+) and a pH optimum between 6.7 and 7.3 that was similar to the enzyme freed of the N-terminal GST portion. Our study revealed that catalytic activity of heparinase I requires a reducing environment. The GST facilitated immobilization of heparinase I in solid phase either for clinical purposes or for structural studies in absence of interference by contaminating polysaccharidases.