Novel Approach for the Simultaneous Determination of Carbinoxamine Maleate, Pholcodine, and Ephedrine Hydrochloride Without Interference from Coloring Matter in an Antitussive Preparation Using Smart Spectrophotometric Methods

Voltammetric analysis of pholcodine on graphene-modified GNPs/PTs with green assessment

Pholcodine, an anti-tussive medication widely used as an over-the-counter, OTC drug, has recently faced restrictions in several countries. This paper presents a sensitive electrochemical approach for pholcodine detection. The electrochemical method involved fabricating a graphene nanoplatelets electrode, incorporating polythiophene nanospheres polymer to promote electron transfer and increase the activated surface area. Characterization of the fabricated electrode was performed using transmission electron microscopy, ATR-Fourier-transform infrared spectroscopy, X-ray crystallography, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy. The electrochemical behavior of pholcodine with the fabricated electrode was investigated using cyclic voltammetry, chronoamperometry, square wave voltammetry (SWV), and differential pulse voltammetry (DPV). The developed electrode led to a linear response for pholcodine ranging from 10 to 45 mg/L with detection limits of 1.41 and 1.51 mg/mL for SWV and DPV, respectively and quantification limits of 4.27 and 4.57 mg/L for SWV and DPV, respectively. The proposed method has accurately recovered pholcodine in spiked serum samples with a recovery percentage ranging from 1.2 to 2.9%. The optimized method is found to be accurate, precise, and robust by applying validation parameters provided by International Council for Harmonization. Two green metrics were computed to assess the method's greenness, the findings showed that the developed method is environmentally friendly with minimum sample preparation steps.

Fast concurrent determination of guaifenesin and pholcodine in formulations and spiked plasma using first derivative synchronous spectrofluorimetric approach

Guaifenesin and pholcodine are frequently co-formulated in certain dosage forms. A new fast first derivative synchronous spectrofluorometric method has been used for their simultaneous analysis in mixtures. Here, first derivative synchronous spectrofluorometry enabled the successful simultaneous estimation of guaifenesin at 283 nm and pholcodine at 275 nm using a wavelength difference (Δλ) of 40 nm. The method was fully validated following International Council of Harmonization guidelines. For guaifenesin and pholcodine, linearity was determined within the corresponding ranges of 0.05-0.30 and 0.10-6.0 μg/ml. The two drugs were effectively analyzed using the developed approach in their respective formulations, and the results showed good agreement with those attained using reference methods. The method demonstrated excellent sensitivity, with detection limits down to 0.007 and 0.030 μg/ml and quantitation limits of 0.020 and 0.010 μg/ml for guaifenesin and pholcodine, respectively. Therefore, the procedure was successful in determining these drugs simultaneously in vitro in spiked plasma samples and syrup dosage form. The developed methodology also offered an environmentally friendly advantage by utilizing water as the optimal diluting solvent throughout the whole work. Different greenness approaches were investigated to ensure the method's ecofriendly properties.

Exploiting the power of UPLC in separation and simultaneous determination of pholcodine, guaiacol along with three specified guaiacol impurities

Pholcodine and guaiacol are widely used together in pharmaceutical syrups for cough treatment. On the other hand, the Ultra Performance Liquid Chromatographic technique is characterized by having the power of increasing chromatographic efficiency and decreasing run time compared to the traditional High Performance Liquid Chromatographic one. In this work, this power was exploited for the simultaneous determination of pholcodine, guaiacol along with three guaiacol impurities, namely; guaiacol impurity A, guaiacol impurity B, and guaiacol impurity E. Good separation was achieved by employing Agilent Zorbax C8 column (50 × 2.1 mm) as the stationary phase, and acetonitrile: phosphate buffer pH 3.5 (40: 60, by volume) as a mobile phase. The proposed method was validated as per International Council for Harmonisation guidelines. Linear relationships, at ranges of 50-1000 µg mL^-1 for pholcodine and 5-100 µg mL^-1 for guaiacol and the three related impurities, were established. Finally, the proposed method was applied for pholcodine and guaiacol determination in Coughpent® syrup and compared favorably to the reported one.

Determination of pholcodine alone or in combination with ephedrine in human plasma using fluorescence spectroscopy

In this study, sensitive, facile, and cost-effective spectrofluorimetric approaches were developed for the determination of pholcodine and ephedrine. Method I is a novel spectrofluorimetric method depending on measuring the native fluorescence of pholcodine at 337 nm after excitation at 284 nm over a concentration range of 0.01-2.4 μg/mL. The method sensitivity reached quantitation and detection limits down to 10.0 and 5.0 ng/mL, respectively. Method II relied on the simultaneous estimation of pholcodine and ephedrine using synchronous fluorimetry for the first time. The cited drugs were measured concurrently at 286 and 304 nm for pholcodine and ephedrine, respectively at Δλ of 40 nm without interference. Excellent linear relationship between concentration and response was obtained over the ranges of 0.05-6.0 μg/mL and 0.02-1.0 μg/mL for pholcodine and ephedrine, respectively. The method showed distinct sensitivity and exhibited quantitation limits of 20.0 and 10.0 ng/mL and detection limits of 10.0 and 5.0 ng/mL, respectively. The method was successfully applied to the syrup dosage form. The two developed approaches were also applied to in-vitro plasma samples, showing good bioanalytical applicability and providing further insights for monitoring drug abuse. The proposed methods were validated according to ICHQ2(R1) guidelines. The proposed methodologies' greenness profiles were evaluated using two greenness assessment tools.

Spectrophotometric study of ephedrine hydrochloride in drug using molecular absorption UV-Visible

A simple, rapid, accurate, and sensitive UV-Visible spectrophotometric method has been developed to estimate ephedrine hydrochloride (Eph) in pharmaceutical drugs. This method is based on preparing chelate complex through the reaction between Eph and cobalt ion (Co (II)). Ephedrine identification is done as an Eph - Co (II) complex after extraction by chloroform at λ max 389 nm. In this work, the optimum operation conditions such as pH, buffer volume, Co ion concentration, time of reaction and extraction, temperature, and water to organic volume ratio were determined. The linearity range of Eph has observed in the range between 1 and 80 ppm, at a wavelength of 387 nm with molar absorptivity range between 3.1867 × 103 to 1.6941 × 103(L·mol^-1·cm^-1) and metal to legend ratio of two. The results obtaind from this study are as follow: relative standard deviation (RSD) percentage is 0.303%, detection limit (D.L) = 0.94 ppm, Sandel's sensitivity (S) = 0.0135, relative error (Erel.) % = 0.039, recovery (Rec.) %=100.039. The results confirmed no interferences of excipients on the detection of Eph, and the proposed method has successfully applied for the determination of ephedrine-HCl in pure and pharmaceutical preparations. This method has several advantages, such as its low cost, high sensitivity, and ease of operation.

All-Solid-State Potentiometric Ion-Sensors Based on Tailored Imprinted Polymers for Pholcodine Determination

In recent times, the application of the use of ion-selective electrodes has expanded in the field of pharmaceutical analyses due to their distinction from other sensors in their high selectivity and low cost of measurement, in addition to their high measurement sensitivity. Cost-effective, reliable, and robust all-solid-state potentiometric selective electrodes were designed, characterized, and successfully used for pholcodine determination. The design of the sensor device was based on the use of a screen-printed electrode modified with multiwalled carbon nanotubes (MWCNTs) as a solid-contact transducer. Tailored pholcodine (PHO) molecularly imprinted polymers (MIPs) were prepared, characterized, and used as sensory receptors in the presented potentiometric sensing devices. The sensors exhibited a sensitivity of 31.6 ± 0.5 mV/decade (n = 5, R² = 0.9980) over the linear range of 5.5 × 10⁻⁶ M with a detection limit of 2.5 × 10⁻⁷ M. Real serum samples in addition to pharmaceutical formulations containing PHO were analyzed, and the results were compared with those obtained by the conventional standard liquid chromatographic approach. The presented analytical device showed an outstanding efficiency for fast, direct, and low-cost assessment of pholcodine levels in different matrices.

Paper-based potentiometric sensing devices modified with chemically reduced graphene oxide (CRGO) for trace level determination of pholcodine (opiate derivative drug)

Robust, reliable and cost-effective paper-based analytical device for potentiometric pholcodine (opiate derivative drug) ion sensing has been prepared and characterized. A printed pholcodinium (PHL)²⁺/5-nitrobarbiturate (NB)⁻ ion-association complex as a sensory material-based all-solid-state ion-selective electrode (ISE) on a chemically reduced graphene oxide (CRGO) solid-contact, and a printed all-solid-state Ag/AgCl reference electrode, has been combined on a hydrophobic paper substrate coated with fluorinated alkyl silane (CF₃(CF₂)₇CH₂CH₂SiCl₃, C^F₁₀). The sensors revealed a potentiometric slope of 28.7 ± 0.3 mV dec⁻¹ (R² = 0.9998) over a linear range starting from 2.0 × 10⁻⁷ M to 1.0 × 10⁻² M and a detection limit of 0.04 μg mL⁻¹. The repeatability and stability of the pholcodine paper-based sensor was found to be 2.32%. The RSD% (n = 6) was found to be 2.67% when using five different paper-based sensors. The sensor revealed an excellent selectivity towards PHL over dextromethorphan, codeine, ephedrine, carbinoxamine, caffeine, ketamine, and K⁺, Na⁺ and Ca²⁺ ions. It showed a good recovery (94–104%) for the determination of PHL in different artificial serum samples. The presented paper-based analytical device was successfully introduced for PHL determination in different pharmaceutical formulations (i.e. syrups and suspensions) containing pholcodine. The current work can be considered as a promising possible analytical tool to obtain cost-effective and disposable paper-based potentiometric sensing devices. These devices can be potentially manufacturable at large scales in pharmaceutical, clinical and forensic applications for opiate drug assessment.

Robust, reliable and cost-effective paper-based analytical device for potentiometric pholcodine (opiate derivative drug) ion sensing has been prepared and characterized.