Solubility of CaHPO4 · 2H2O in the Quaternary System Ca(OH)2 - H3PO4 - NaCl - H2O at 25 °C

Mineralogical-geochemical study of the anionic competition effect on the octacalcium phosphate reaction into fluorapatite

The unstable compound octacalcium phosphate (OCP) is one of the crystalline precursors of the apatite mineral series composed by hydroxyapatite, fluorapatite and chlorapatite. The feature of OCP to react into apatite, depending on the media conditions, has been mainly exploited for biomedical applications as bone and tooth substitute material. Recently, some important applications of OCP have been documented: e.g. as electrode material for supercapacitors and as fluoride remover reagent for environmental purposes. With the aim of deepening the property of OCP to be the crystalline precursor of apatite and assessing if and how the anionic competition can influence the formation of the different apatite end-members, the OCP → apatite reaction has been here investigated placing 0.223 mmol of OCP in 50 mL aqueous solution with 0.368 mmol of dissolved fluoride, chloride, hydroxyl and carbonate anions (fluoride alone, fluoride with each of the other anions, and all the anions together) at room temperature. The post-experiment analyses of solid and liquid phases, conducted by using XRD, ESEM and ICP-OES, show that fluoride is always the main anion removed from solution during the OCP transformation reaction. The precise mineralogical characterization of solid phases formed, performed using the Rietveld algorithm, shows that fluorapatite is always the main resulting apatitic phase, followed by hydroxyapatite. Taking into account the different application fields of OCP, these results could be significant in better defining the OCP → apatite reaction in aqueous solutions where different competing anions are involved.

Technological Challenges of Phosphorus Removal in High-Phosphorus Ores: Sustainability Implications and Possibilities for Greener Ore Processing

With the present rates of iron ore consumption, currently unusable, high-phosphorus iron ore deposits are likely to be the iron ores of the future as higher-grade iron ore reserves are depleted. Consequently, the design and timely development of environmentally-benign processes for the simultaneous beneficiation of high-phosphorus iron ores and phosphorus recovery, currently a technological challenge, might soon become a sustainability challenge. To stimulate interest in this area, phosphorus adsorption and association in iron oxides/hydroxyoxides, and current efforts at its removal, have been reviewed. The important properties of the most relevant crystalline phosphate phases in iron ores are highlighted, and insights provided on plausible routes for the development of sustainable phosphorus recovery solutions from high-phosphorus iron ores. Leveraging literature information from geochemical investigations into phosphorus distribution, speciation, and mobility in various natural systems, key knowledge gaps that are vital for the development of sustainable phosphorus removal/recovery strategies and important factors (white spaces) not yet adequately taken into consideration in current phosphorus removal/recovery solutions are highlighted, and the need for their integration in the development of future phosphorus removal/recovery solutions, as well as their plausible impacts on phosphorus removal/recovery, are put into perspective.

Calculation by computer of individual concentrations in a simulated milk salt solution: II. An extension to the previous model

The computer program described by Wood, Reid & Elvin (1981) has been extended to include the complexes formed in alkaline solutions of Ca citrate and phosphate. Mg complexes are also included. Supersaturation with respect to various solid phases is tested for and the composition of the aqueous phase adjusted accordingly. Additional tests of the program have confirmed its accuracy and shown how the results depend on the values chosen for the relevant equilibrium constants.

Estimating the precipitation potential in urine-collecting systems

Precipitation in urine-separating toilets (NoMix toilets) and waterless urinals causes severe maintenance problems and can strongly reduce the content of soluble phosphate. In this study, we present a computer model for estimating the precipitation potential (PP) in urine-collecting systems. Calculating the PP enables to predict the composition and mass concentration of precipitates. We used our computer model for investigating how urea hydrolysis and dilution with flushing water affect precipitation. In a previous study, we found that microbial urea hydrolysis (ureolysis) triggers precipitation and that the amount of precipitates is limited by calcium and magnesium. With the present simulations, we could confirm these findings. We determined that only a small fraction of urea has to be hydrolysed for reaching 95% of the maximum PP. Since urease-positive bacteria are abundant in urine-collecting systems, strong precipitation is very likely. In further simulations, we determined that struvite (MgNH(4)PO(4).6H(2)O) and hydroxyapatite (HAP, Ca(10)(PO(4))(6)(OH)(2)) are the main precipitate compounds. If urine is highly diluted with tapwater, calcite (CaCO(3)) occurs as well. HAP is the only calcium phosphate mineral, although several others were supersaturated. Additionally, the simulations indicated that urine dilution diminishes the risk of blockages, since the mass concentration of precipitates decreases with the volume of flushing water. Rainwater flushing is more effective than flushing with tapwater. Moreover, flushing with tapwater leads to high phosphate fixation, because the total amount of calcium and magnesium ions increases, while the total amount of phosphate keeps constant. Finally, we compared simulation results with field measurements and found good agreement at low and very high urine dilution.

Use of Dicalcium Phosphate Dihydrate as a Probe in an Approach for Accurate Calculations of Solution Equilibria in Buffered Calcium Phosphate Systems

Both synthetic and biological carbonated apatites have been shown to possess metastable equilibrium solubility (MES) distributions. Investigation of their MES behavior requires accurate knowledge of the activities of the relevant ions over a range of solution compositions. This in turn requires that the activity coefficients for these ions and the stability constants for the various solution complexes be accurately known. Since the solubility of dicalcium phosphate dihydrate (DCPD) can be easily determined, it can be used as a probe to study the appropriateness of proposed sets of stability constants and activity coefficients. In the present study, the solubility of DCPD was determined in acetate buffer solutions at pHs ranging from 4.5 to 6.5 and this allowed for the determination and evaluation of the stability constants of the NaHPO(-)(4), CaHPO(0)(4), CaH(2)PO(+)(4), and CaAc(+) complexes. The activity coefficients were calculated by a modification of the extended Debye-Hückel method and also by Bockris and Reddy's method, in which the activity of water and the hydration numbers of ions are also considered. The solution conditions were controlled to simulate the dissolution media used for the determination of MES distributions of apatites in our laboratory. Both methods of activity coefficient determination gave very consistent DCPD solubility product (K(DCPD)) values, and values for the stability constants of the relevant complexes determined using the two methods were close to each other. This approach of determining the stability constants under a set of conditions similar to those in apatite dissolution studies offers an effective set of parameters which, though not necessarily always exactly correct in absolute terms, are internally consistent and should allow for the quantitative characterization of the MES behavior of apatites. Copyright 1999 Academic Press.

Dental research at the National Bureau of Standards: how it changed the practice of dental health service

A history of dental research at the National Bureau of Standards since its inception in 1919 is presented. The initial thrust on dental amalgam by the US Army Dental Corps, the assignment of Dr. William Souder to the project, and subsequent developments are traced. Difficulties in obtaining support for the early stages of the program following World War I are described. The involvement of the American Dental Association in 1928, issuance of the first ADA specification on dental amalgam, and the ultimate ramifications on dental (and medical) standards programs throughout the world are described. Benefits to patients, dentists, and taxpayers from support of the dental research program have been calculated as exceeding the combined budgets of the currently supporting institutions--NBS, ADA, and National Institute of Dental Research.