Band Structure Optimized by Electron-Acceptor Cations for Sensitive Perovskite Single Crystal Self-Powered Photodetectors

Low-dimensional perovskites afford improved stability against moisture, heat, and ionic migration. However, the low dimensionality typically results in a wide bandgap and strong electron-phonon coupling, which is undesirable for optoelectronic applications. Herein, semiconducting A-site organic cation engineering by electron-acceptor bipyridine (bpy) cations (2,2'-bpy2+ and 4,4'-bpy2+) is employed to optimize band structure in low-dimensional perovskites. Benefiting from the merits of lower lowest unoccupied molecular orbital (LUMO) energy for 4,4'-bpy2+ cation, the corresponding (4,4'-bpy)PbI4 is endowed with a smaller bandgap (1.44 eV) than the (CH3NH3)PbI3 (1.57 eV) benchmark. Encouragingly, an intramolecular type II band alignment formation between inorganic Pb-I octahedron anions and bpy2+ cations favors photogenerated electron-hole pairs separation. In addition, a shortening distance between inorganic Pb-I octahedral chains in (4,4'-bpy)PbI4 single crystal (SC) can effectively promote carrier transfer. As a result, a self-powered photodetector based on (4,4'-bpy)PbI4 SC exhibits 131 folds higher on/off ratio (3807) than the counterpart of (2,2'-bpy)2Pb3I10 SC (29). The presented result provides an effective strategy for exporting novel organic cation-based low-dimensional perovskite SC for high-performance optoelectronic devices.

Controlling Electron Delocalization in Vanadium-Based Hybrid Bronzes through Molecular Templation

We show that the conductivity of hybrid vanadium bronzes-mixed-valence organic-inorganic vanadium oxides-can be tuned over six orders of magnitude through judicious choice of molecular component. By systematically varying the steric profile, charge density, and propensity to hydrogen bond across a series of eight diammonium-based molecules, we engender multiple distinct motifs of V-O connectivity within the two-dimensional vanadium oxide layers of a family of bulk crystalline hybrid materials. A combination of single-crystal and powder X-ray diffraction analysis, variable-temperature electrical transport measurements, and a range of spectroscopic methods, including UV/Visible diffuse reflectance, X-ray photoelectron, and electron paramagnetic resonance are employed to probe how vanadium oxide layer topology correlates with electron localization. Specifically, alkylammonium molecules yield hybrids featuring more corrugated layers that contain V-O tetrahedra as well as a higher ratio of corner-sharing to edge-sharing polyhedra and that exhibit highly localized electronic behavior, while alkyl bipyridinium molecules yield more regular layers with polyhedral edge-sharing that show substantially delocalized electronic behavior. This work allows for the development of design principles based on structure-property relationships and brings the charge transport capabilities of hybrid vanadium bronzes to more technologically relevant levels.

Synthesis and Reduction of Nitrogen-Substituted Diaryl Dihydrophenazine Diradical Dications

A one-pot synthetic approach to form core-extended N,N'-disubstituted diaryl dihydrophenazine (DADHP) diradical dications (DRDCs) via chemical oxidation from aryl-substituted ortho-phenyldiamines is reported. The isolated N,N'-disubstituted DADHP DRDCs were reduced to their neutral counterparts with hydrazine. The model system featuring an unsubstituted fluorene aryl group, 2a, was tested as a photocatalyst for the polymerization of methyl methacrylate using organocatalyzed atom transfer polymerization (O-ATRP), which yielded a polymer with a controlled molecular weight and narrow polydispersity.

Establishing Family Relations in Group 15 Halogenido Metalates with the Largest Molecular Antimony Iodide Anion

Studying structurally related families of compounds is a valuable tool in understanding and predicting material properties and has been extensively used for metal halide perovskites. Due to the variable anion structures in group 15 halogenido metalates, similar family relations are still largely missing. Herein, we present compounds featuring the [Sb_2n I_6n+4 ]^4- family of anions, including the first n=5 member in [Hpyz]₄ [Sb₁₀ I₃₄ ] (Hpyz=pyrazinium), which contains the largest halogenido pentelate anion reported to date. The optical properties of compounds featuring n=1-5 anions show a clear trend as well as an outlier, a low band gap of 1.72 eV for [Hpyz]₄ [Sb₁₀ I₃₄ ], that can be well understood using quantum chemical investigations. Also using SbI₃ and [H₂ NMe₂ ]₃ [SbI₆ ], a compound featuring a single octahedral [SbI₆ ]^3- unit, as limiting cases, we show that structure-property relationships can be established in group 15 halogenido metalates in a similar way as in metal halide perovskites, thus providing a framework for understanding new and known compounds in this emerging class of materials.

Cesium-mediated electron redistribution and electron-electron interaction in high-pressure metallic CsPbI3

Electron-phonon coupling was believed to govern the carrier transport in halide perovskites and related phases. Here we demonstrate that electron-electron interaction enhanced by Cs-involved electron redistribution plays a direct and prominent role in the low-temperature electrical transport of compressed CsPbI3 and renders Fermi liquid (FL)-like behavior. By compressing δ-CsPbI3 to 80 GPa, an insulator-semimetal-metal transition occurs, concomitant with the completion of a slow structural transition from the one-dimensional Pnma (δ) phase to a three-dimensional Pmn21 (ε) phase. Deviation from FL behavior is observed upon CsPbI3 entering the metallic ε phase, which progressively evolves into a FL-like state at 186 GPa. First-principles density functional theory calculations reveal that the enhanced electron-electron coupling results from the sudden increase of the 5d state occupation in Cs and I atoms. Our study presents a promising strategy of cationic manipulation for tuning the electronic structure and carrier scattering of halide perovskites at high pressure.

(C5H6N)Pb2X5 (X = Cl, Br): Hybrid Lead Halides Based on Seven-Coordinate Pb(II)

Hybrid lead halides are a diverse family of compounds, of interest for their optoelectronic properties, that vary in the dimensionality and connectivity of their inorganic substructures. The great majority of these compounds are based on lead-centered octahedra, with few examples featuring inorganic architectures containing higher coordination numbers. Here, we report the synthesis and characterization of a pyridinium lead bromide phase that is based on seven-coordinate Pb(II) centers. Through edge- and face-sharing, the polyhedra form a corrugated, two-dimensional inorganic substructure. Electronic structure calculations were used to examine the band structure and the role of the stereoactive lone pair in the inherently asymmetric, seven-coordinate Pb(II) geometry. For reference, we have visualized the role of the lone pair in the binary halide PbBr₂, which also has a seven-coordinate inner ligand sphere. A comparison of the new structure with the limited number of existing hybrid lead halides with similar inorganic architectures highlights the templating role of the organic cation for these compounds. We also contribute characterization and discussion of isomorphic pyridinium lead chloride, which had been deposited in the Cambridge Structural Database but never, to our knowledge, addressed in the literature. The compounds were synthesized using solution conditions and structures determined with single-crystal X-ray diffraction. The materials were also characterized via powder X-ray diffraction, combustion elemental analysis, and diffuse reflectance UV-vis spectroscopy. While the structures reported here are centrosymmetric, the seven-coordinate, capped trigonal prismatic geometry that we have identified is a source of local asymmetry that could be used as a component in designing globally noncentrosymmetric structures.

Tolerance Factor for Stabilizing 3D Hybrid Halide Perovskitoids Using Linear Diammonium Cations

Three-dimensional (3D) halide perovskites have attracted enormous research interest, but the choice of the A-site cations is limited by the Goldschmidt tolerance factor. In order to accommodate cations that lie outside the acceptable range of the tolerance factor, low-dimensional structures usually form. To maintain the favorable 3D connection, the links among the metal-halide octahedra need to be rearranged to fit the large cations. This can result in a departure from the proper corner-sharing perovskite architectures and lead to distinctly different perovskitoid motifs with edge- and face-sharing. In this work, we report four new 3D bromide perovskitoids incorporating linear organic diammonium cations, A'Pb₂Br₆ (A' is a +2 cation). We propose a rule that can guide the further expansion of this class of compounds, analogous to the notion of Goldschmidt tolerance factor widely adopted for 3D AMX₃ perovskites. The fundamental building blocks in A'Pb₂Br₆ consist of two edge-shared octahedra, which are then connected by corner-sharing to form a 3D network. Different compounds adopt different structural motifs, which can be transformed from one to another by symmetry operations. Electronic structure calculations suggest that they are direct bandgap semiconductors, with relatively large band dispersions created by octahedra connected by corner-sharing. They exhibit similar electronic band structures and dynamic lattice characteristics to the regular 3D AMX₃ perovskites. Structures with smaller Pb-Br-Pb angles and larger octahedra distortion exhibit broad photoluminescence at room temperature. The emerging structure-property relationships in these 3D perovskitoids set the foundation for designing and investigating these compounds for a variety of optoelectronic applications.

Material exploration via designing spatial arrangement of octahedral units: a case study of lead halide perovskites

Halide perovskites have attracted tremendous attention as semiconducting materials for various optoelectronic applications. The functional metal-halide octahedral units and their spatial arrangements play a key role in the optoelectronic properties of these materials. At present, most of the efforts for material exploration focus on substituting the constituent elements of functional octahedral units, whereas designing the spatial arrangement of the functional units has received relatively little consideration. In this work, via a global structure search based on density functional theory (DFT), we discovered a metastable three-dimensional honeycomb-like perovskite structure with the functional octahedral units arranged through mixed edge- and corner-sharing. We experimentally confirmed that the honeycomb-like perovskite structure can be stabilized by divalent molecular cations with suitable size and shape, such as 2,2'-bisimidazole (BIM). DFT calculations and experimental characterizations revealed that the honeycomb-like perovskite with the formula of BIMPb₂I₆, synthesized through a solution process, exhibits high electronic dimensionality, a direct allowed bandgap of 2.1 eV, small effective masses for both electrons and holes, and high optical absorption coefficients, which indicates a significant potential for optoelectronic applications. The employed combination of DFT and experimental study provides an exemplary approach to explore prospective optoelectronic semiconductors via spatially arranging functional units.

Tetrazine molecules as an efficient electronic diversion channel in 2D organic-inorganic perovskites

Taking advantage of an innovative design concept for layered halide perovskites with active chromophores acting as organic spacers, we present here the synthesis of two novel two-dimensional (2D) hybrid organic-inorganic halide perovskites incorporating for the first time 100% of a photoactive tetrazine derivative as the organic component. Namely, the use of a heterocyclic ring containing a nitrogen proportion imparts a unique electronic structure to the organic component, with the lowest energy optical absorption in the blue region. The present compound, a tetrazine, presents several resonances between the organic and inorganic components, both in terms of single particle electronic levels and exciton states, providing the ideal playground to discuss charge and energy transfer mechanisms at the organic/inorganic interface. Photophysical studies along with hybrid time-dependent DFT simulations demonstrate partial energy transfer and rationalise the suppressed emission from the perovskite frame in terms of different energy-transfer diversion channels, potentially involving both singlet and triplet states of the organic spacer. Periodic DFT simulations also support the feasibility of electron transfer from the conduction band of the inorganic component to the LUMO of the spacer as a potential quenching mechanism, suggesting the coexistence and competition of charge and energy transfer mechanisms in these heterostructures. Our work proves the feasibility of inserting photoactive small rings in a 2D perovskite structure, meanwhile providing a robust frame to rationalize the electronic interactions between the semiconducting inorganic layer and organic chromophores, with the prospects of optimizing the organic moiety according to the envisaged application.