The adsorption performance and micro-mechanism of MoS2/montmorillonite composite to atenolol and acebutolol: Adsorption experiments and a novel visual study of interaction

MoS₂/montmorillonite (MoS₂/Mt) composite was successfully synthesized through a simple hydrothermal method, and its adsorption performance for two emerging contaminants-atenolol (ATE) and acebutolol (ACE) was researched. The batch experiments revealed that the adsorption process can be described by the Pseudo-second order model and Langmuir model, and the adsorption capacity of MoS₂/Mt, MoS₂ and Mt for ATE were 132.08 mg/g, 60.68 mg/g and 74.23 mg/g, for ACE were 113.82 mg/g, 33.01 mg/g and 36.05 mg/g, respectively. Besides, Fourier-transform infrared spectroscopy (FTIR), BET specific surface area measurement and X-ray photoelectron spectroscopy (XPS) were also employed to analyze the adsorption mechanism. Moreover, quantitative molecular surface analysis and weak intermolecular interaction analysis with independent gradient model were combined to probe the microscopic interaction between the adsorbent and adsorbate. The results indicated the interactions included hydrogen bonding and vdW interaction. Mt and MoS₂ interacted more strongly with ATE than ACE, which revealed the reason MoS₂/Mt, Mt and MoS₂ possessed higher adsorption capacity for ATE.

Interactions between Active Ingredient Ranitidine and Clay Mineral Excipients in Pharmaceutical Formulations

Excipients play an important role in pharmaceutical formulations. Many clay minerals, because of their large specific surface area and inert behaviour in reactions with active ingredients, are commonly used as excipients. In this study, the uptake of ranitidine (RT), the active ingredient of Zantac, on and released from palygorskite (Pal), kaolinite (Kao), and talc was evaluated under different physicochemical conditions. The results showed that the uptake of RT on these minerals was limited to the external surface areas only. Cation exchange and electrostatic interactions were responsible for the RT uptake on Pal and Kao, resulting in a monolayer sorption. In contrast, multilayer RT uptake was found on the talc surfaces. Under different desorbing conditions, significant amounts of sorbed RT remained on the solid surface after 5 h of desorption. The results suggest that the sorptive interactions between the active ingredients and the excipients may not be neglected in pharmaceutical formulations, should these minerals be used as additives and/or excipients.

The single/co-adsorption characteristics and microscopic adsorption mechanism of biochar-montmorillonite composite adsorbent for pharmaceutical emerging organic contaminant atenolol and lead ions

An eco-friendly corncob biochar based montmorillonite composite (Cc-Mt) was synthesized for the single adsorption and co-adsorption of lead (Pb(II)) and a pharmaceutical emerging organic contaminant Atenolol (ATE). In single adsorption system, the maximum equilibrium capacity of Cc-Mt for Pb (II) and ATE were 139.78 mg g^-1 and 86.86 mg g^-1, respectively, but for montmorillonite just 98.69 mg g^-1 and 69.68 mg g^-1, for corncob biochar just 117.54 mg g^-1 and 47.29 mg g^-1. Meanwhile,co-adsorption properties of ATE and Pb(II) on Cc-Mt composite were performed and found that the influence of ATE on the adsorption of Pb(II) was greater than the effect of Pb(II) on that of ATE. Moreover, Multiwfn program based on quantum chemical calculation was used to quantitatively analyze electrostatic potential (ESP) distribution, average local ionization energy (ALIE) distribution and their minimum points on neutral ATE and protonated ATE (PATE) molecules to reveal the microscopic adsorption mechanism of Cc-Mt composite to ATE, the results showed that the amino N and amide oxygen atom were easier to provide lone pair of electrons, generating hydrogen bonds or strong electrostatic interactions with functional groups on the surface of Cc-Mt, meanwhile hydroxyl O atom was also a possible reaction site. For PATE molecules, only the oxygen atom of the amide group was the most likely reactive site.

Compatibility study of rosmarinic acid with excipients used in pharmaceutical solid dosage forms using thermal and non-thermal techniques

Rosmarinic acid (RA) is a phenolic compound that presents well-documented anti-inflammatory, antioxidant and antitumor activities, and based on its pharmacological potential and poor bioavailability, several solid dosage forms have been developed to RA delivery. Therefore, in literature, there are no reports about RA compatibility with excipients. In this regard, the aim of the present study was to evaluate, for the first time, the compatibility of RA with excipients commonly used in solid dosage forms at a 1:1 (RA:excipient) ratio using differential scanning calorimetry (DSC), thermogravimetry (TG), Fourier-transform infrared (FTIR), solid-state nuclear magnetic resonance (ssNMR), and isothermal stress testing (IST) coupled with liquid chromatography (LC). The excipients selected were hydroxypropyl methylcellulose (HPMC), microcrystalline cellulose (MCC), lactose monohydrate (LAC), polyvinylpyrrolidone (PVP), talc (TALC), croscarmellose sodium (CCS), and magnesium stearate (MgSTE). According to DSC results, physical interactions were found between RA and HPMC, LAC, CCS, and MgSTE. The TG analyses confirmed the physical interactions and suggested chemical incompatibility. FTIR revealed physical interaction of RA with TALC and MgSTE and the ssNMR confirmed the physical interaction showed by FTIR and excluded the presence of chemical incompatibility. By IST, the greatest loss of RA content was found to CCS and MgSTE (>15%), demonstrating chemical incompatibilities with RA. High temperatures used in DSC and TG analyses could be responsible for incompatibilities in binary mixtures (BMs) with HPMC and LAC, while temperature above 25 °C and presence of water were factors that promote incompatibilities in BMs with CCS and MgSTE. Overall results demonstrate that RA was compatible with MCC and PVP.