Bacterial survival rate on toothbrushes and their decontamination with antimicrobial solutions

The purpose of this study was to evaluate bacterial survival rate on toothbrushes after brushing and the efficacy of their decontamination by spraying antimicrobial solutions. Thirty subjects were instructed to spray the solutions on toothbrush bristles after brushing. Each volunteer tested three sprays, one solution per week; the sprays were labeled spray 1 (cetylpyridinium chloride - CPC - and basic formulation), 2 (basic formulation only) and 3 (control - sterile tap water). At the end of each week, the brushes were collected and sonicated in Letheen Broth®; the suspensions were ten-fold diluted and the dilutions were plated on various culture media. Anaerobic bacteria, evaluated by colony count of black pigment producing organisms on Ask medium, were recovered from 83.3% of the samples, Streptococci from 80% and aerobic Gram-negative bacilli from 46.7% of them in the control tests. There was a significant decrease in toothbrush contamination with antimicrobial sprays 1 and 2, the first showing the greatest decrease on bacterial counts.

Preparation and Antimicrobial Activityof Gelatin Microparticles Containing Propolis Against Oral Pathogens

Gelatin microparticles containing propolis ethanolic extractive solution were prepared by spray-drying technique. Particles with regular morphology, mean diameter ranging of 2.27 microm to 2.48 microm, and good entrapment efficiency for propolis were obtained. The in vitro antimicrobial activity of microparticles was evaluated against microorganisms of oral importance (Enterococcus faecalis, Streptococcus salivarius, Streptococcus sanguinis, Streptococcus mitis, Streptococcus mutans, Streptococcus sobrinus, Candida albicans, and Lactobacillus casei). The utilized techniques were diffusion in agar and determination of minimum inhibitory concentration. The choice of the method to evaluate the antimicrobial activity of microparticles showed be very important. The microparticles displayed activity against all tested strains of similar way to the propolis, showing greater activity against the strains of E. salivarius, S. sanguinis, S. mitis, and C. albicans.

In vitro and clinical evaluation of specific dentifrices for complete denture hygiene

OBJECTIVES

To study the physical properties of two experimental dentifrices for complete denture hygiene, their effect on denture biofilm removal and antimicrobial properties by means of a clinical trial.

MATERIALS AND METHODS

The experimental dentifrices comprised two compositions. One was based on the addition of 1% chloramine T (D1) and the other on the presence of 0.01% fluorosurfactant (D2). Measurements of density, pH, consistency, rheological features and abrasiveness were conducted. Sixty complete denture wearers were randomly assigned to three groups and were instructed to brush their dentures with a specific toothbrush: (1) Water (control); (2) D1; or (3) D2. Each method was used for 21 days. Denture biofilm was disclosed by a 1% neutral red solution and quantified by means of digital photos taken from the internal surface. Microbiological assessment was conducted to quantify Candida sp. and mutans streptococci. Data were evaluated by one-way anova and Tukey HSD, or Kruskal-Wallis (alpha = 0.05).

RESULTS

Both dentifrices decreased biofilm coverage when compared with the control group. D1 was the most efficacious treatment to reduce mutans streptococci, whereas D2 showed an intermediate outcome (ANOVA, p < 0.040). No treatment influenced Candida albicans or non-albicans species (Kruskal-Wallis, p = 0.163 and 0.746, respectively).

CONCLUSION

It can be concluded that brushing complete dentures with the experimental dentifrices tested could be effective for the removal of denture biofilm.

Antimicrobial spray for toothbrush disinfection: an in vivo evaluation

OBJECTIVE

The aim of this study was to evaluate the efficacy of a spray containing an antimicrobial solution for toothbrush disinfection.

METHODS AND MATERIALS

Three different solutions were sprayed on toothbrush bristles among 30 adults after they had brushed: (1) basic formulation (base) plus chlorhexidine; (2) base only, and (3) sterile tap water (control). Each solution was tested for 1 week. After that, the toothbrushes were collected and sonicated in Letheen Broth, diluted in 10-fold series, and plated on selective and nonselective media for detection of anaerobes, aerobes, streptococci, and gram-negative bacilli. After incubation, the colonies of those microorganisms were counted. Presence of mutans streptococci on the bristles was also confirmed.

RESULTS

Spray 1 produced a significant reduction in the microbial contamination of toothbrushes for all the microorganisms, spray 2 provided some reduction of contaminants, and spray 3 demonstrated the least antimicrobial effect.

CONCLUSION

The antimicrobial spray with chlorhexidine proved to be an effective and practical means for toothbrush disinfection.

Comparison of two cleansing pastes for the removal of biofilm from dentures and palatal lesions in patients with atrophic chronic candidiasis

The efficacy of 2 oral hygiene products, an experimental toothpaste specific for complete denture cleansing and a regular standard toothpaste, was compared in terms of denture biofilm removal and cure of palatal lesions in patients with atrophic chronic candidiasis. The degree of correlation between presence of biofilm and mucosa erythema was also evaluated. Twenty-four complete denture wearers (45-80 years old) were divided into 2 groups: experimental paste and standard toothpaste (Sorriso-Kolynos, Brazil). Both groups received soft toothbrushes. The internal surfaces of upper dentures were stained using 1% sodium fluorescein and photographed at a 45 masculine angle at 0, 15, 30 and 60 days. The slides were scanned and the areas of interest (denture total area and biofilm area) were measured (Image Tool software). The degree of erythema was evaluated on slides according to the Prosthesis Tissue Index. There was a significant reduction (1%) in the degree of biofilm (ANOVA/Tukey) between the two initial visits (0 and 15 days) and the two final visits (30 and 60 days), and in the average erythema scores (Kruskal-Wallis) between 0 and 60 days, in both groups. The Mann-Whitney test showed a significant difference (1%) between pastes in terms of biofilm degree, but no difference was found for the erythema score. Correlation values between biofilm and erythema degree were 0.3801 (experimental paste) and (0.3678 (standard toothpaste). We may therefore conclude that the experimental product was efficient for the removal of denture plaque biofilm.

Tongue-cleaning methods: a comparative clinical trial employing a toothbrush and a tongue scraper

BACKGROUND

It is estimated that approximately 85% of all halitosis cases have their origin within the mouth; of these, 50% are caused by tongue residues. Previous studies have established that hydrogen sulfide and mercaptans are the primary components of halitosis. Thus, tongue cleaning gains importance as a means of halitosis management.

METHODS

This investigation compared the efficacy of two mechanical methods for tongue cleaning through a handheld sulfide monitor. This crossover trial was carried out with 10 healthy subjects, 20 to 50 years old. Before the baseline measurement of the volatile sulfur compounds (VSCs), the subjects were instructed to refrain from any tongue cleaning method for 48 hours. The 10 participants were then placed in one of two groups (five each): 1) first week: tongue scraper, second week: soft-bristle toothbrush; 2) first week: toothbrush, second week: tongue scraper, with a 48-hour wash-out period between each week.

RESULTS

The baseline measurements were compared with those of the end of each week using the Dunn method (alpha = 0.01). The tongue scraper showed a 75% reduction in VSCs, while the toothbrush only achieved a 45% reduction in VSCs.

CONCLUSION

Although the tongue coating was removed by both methods, the tongue scraper performed better in reducing the production of volatile sulfur compounds.

Assessing the surface roughness of a posterior resin composite: effect of surface sealing

This study assessed the in vitro influence of surface sealing on the surface roughness of a posterior resin composite before and after toothbrushing. Thirty specimens (13 mm diameter x 1 mm high) were fabricated from Filtek-P60 resin composite and randomly assigned to three groups (n = 10): a non-sealed control and two groups sealed with one of the tested materials-a surface-penetrating sealant (Protect-it!-PI) and a one bottle adhesive system (Single Bond-SB). The samples were subjected to a surface roughness reading to determine the initial roughness, then submitted to simulated toothbrushing with 35,600 cycles for 100 minutes. Specimens were then cleaned and a post-abrasion surface roughness reading accomplished. Means (microm), recorded before (B) and after (A) toothbrushing, and standard deviations were: Control--(B): 0.032 (+/- 0.005), (A): 0.054 (+/- 0.005); PI-(B): 0.034 (+/- 0.005), (A): 0.060 (+/- 0.034); SB (B): 0.031 (+/- 0.004), (A): 0.047 (+/- 0.007). Data were tabulated and submitted to two-way ANOVA. No statistically significant difference was observed when the control and experimental groups were compared. However, a significant difference (p < 0.05) was found between the measurements performed before and after toothbrushing. Based on these results, it may be concluded that using either a surface penetrating sealant or a one bottle adhesive system did not provide the optimization of superficial integrity. The use of a dentifrice and toothbrush resulted in significant alterations to the surface smoothness of the resin composite.