Evaluation of non-additive genetic effects on carcass and meat quality traits in Korean Hanwoo cattle using genomic models

The traditional genetic evaluation methods generally consider additive genetic effects only and often ignore non-additive (dominance and epistasis) effects that may have contributed to genetic variation of complex traits of livestock species. The available dense single nucleotide polymorphisms (SNPs) panels offer to investigate the potential benefits of including non-additive genetic effects in the genomic evaluation models. Data from 16 971 genotyped (Illumina Bovine 50 K SNP chip) Korean Hanwoo cattle were used to estimate genetic variance components and prediction accuracy of genomic breeding values (GEBVs) for four carcass and meat quality traits: carcass weight (CWT), eye muscle area (EMA), back fat thickness (BFT) and marbling score (MS). Five different genetic models were evaluated through including additive, dominance and epistatic interactions (additive by additive, A × A; additive by dominance, A × D and dominance by dominance, D × D) successively in the models. The estimates of additive genetic variances and narrow sense heritabilities (ha2) were found similar across the evaluated models and traits except when additive interaction (A × A) was included. The dominance variance estimates relative to phenotypic variance ranged from 1.7-3.4% for CWT and MS traits, whereas, they were close to zero for EMA and BFT traits. The magnitude of A × A epistatic heritability (haa2) ranged between 14.8 and 27.7% in all traits. However, heritability estimates for A × D and D × D epistatic interactions (had2 and hdd2) were quite low compared to haa2 and were contributed only 0.0-9.7% of the total phenotypic variation. In general, broad sense heritability (hG2) estimates were almost twice (ranging between 0.54 and 0.68) the ha2 for all of the investigated traits. The inclusion of dominance effects did not improve the prediction accuracy of GEBV but improved 2.0-3.0% when epistatic effects were included in the model. More importantly, rank correlation revealed that partitioning of variance components considering dominance and epistatic effects in the model would enable to re-rank of top animals with better prediction of GEBV. The present result suggests that dominance and epistatic effects could be included in the genomic evaluation model for better estimates of variance components and more accurate prediction of GEBV for carcass and meat quality traits in Korean Hanwoo cattle.

Amplitude Analysis of the B^{0}→K^{*0}μ^{+}μ^{-} Decay

An amplitude analysis of the B^{0}→K^{*0}μ^{+}μ^{-} decay is presented using a dataset corresponding to an integrated luminosity of 4.7  fb^{-1} of pp collision data collected with the LHCb experiment. For the first time, the coefficients associated to short-distance physics effects, sensitive to processes beyond the standard model, are extracted directly from the data through a q^{2}-unbinned amplitude analysis, where q^{2} is the μ^{+}μ^{-} invariant mass squared. Long-distance contributions, which originate from nonfactorizable QCD processes, are systematically investigated, and the most accurate assessment to date of their impact on the physical observables is obtained. The pattern of measured corrections to the short-distance couplings is found to be consistent with previous analyses of b- to s-quark transitions, with the largest discrepancy from the standard model predictions found to be at the level of 1.8 standard deviations. The global significance of the observed differences in the decay is 1.4 standard deviations.

Fraction of χ_{c} Decays in Prompt J/ψ Production Measured in pPb Collisions at sqrt[s_{NN}]=8.16 TeV

The fraction of χ_{c1} and χ_{c2} decays in the prompt J/ψ yield, F_{χ_{c}→J/ψ}=σ_{χ_{c}→J/ψ}/σ_{J/ψ}, is measured by the LHCb detector in pPb collisions at sqrt[s_{NN}]=8.16  TeV. The study covers the forward (1.5 Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Observation of Cabibbo-Suppressed Two-Body Hadronic Decays and Precision Mass Measurement of the Ω_{c}^{0} Baryon

The first observation of the singly Cabibbo-suppressed Ω_{c}^{0}→Ω^{-}K^{+} and Ω_{c}^{0}→Ξ^{-}π^{+} decays is reported, using proton-proton collision data at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 5.4  fb^{-1}, collected with the LHCb detector between 2016 and 2018. The branching fraction ratios are measured to be B(Ω_{c}^{0}→Ω^{-}K^{+})/B(Ω_{c}^{0}→Ω^{-}π^{+})=[6.08±0.51(stat)±0.40(syst)]%,B(Ω_{c}^{0}→Ξ^{-}π^{+})/B(Ω_{c}^{0}→Ω^{-}π^{+})=[15.81±0.87(stat)±0.44(syst)±0.16(ext)]%. In addition, using the Ω_{c}^{0}→Ω^{-}π^{+} decay channel, the Ω_{c}^{0} baryon mass is measured to be M(Ω_{c}^{0})=2695.28±0.07(stat)±0.27(syst)±0.30(ext)  MeV, improving the precision of the previous world average by a factor of 4.

Enhanced Production of Λ_{b}^{0} Baryons in High-Multiplicity pp Collisions at sqrt[s]=13 TeV

The production rate of Λ_{b}^{0} baryons relative to B^{0} mesons in pp collisions at a center-of-mass energy sqrt[s]=13  TeV is measured by the LHCb experiment. The ratio of Λ_{b}^{0} to B^{0} production cross sections shows a significant dependence on both the transverse momentum and the measured charged-particle multiplicity. At low multiplicity, the ratio measured at LHCb is consistent with the value measured in e^{+}e^{-} collisions, and increases by a factor of ∼2 with increasing multiplicity. At relatively low transverse momentum, the ratio of Λ_{b}^{0} to B^{0} cross sections is higher than what is measured in e^{+}e^{-} collisions, but converges with the e^{+}e^{-} ratio as the momentum increases. These results imply that the evolution of heavy b quarks into final-state hadrons is influenced by the density of the hadronic environment produced in the collision. Comparisons with several models and implications for the mechanisms enforcing quark confinement are discussed.

Effects of sepiolite addition to acrylic-latex paint on pull-off adhesion strength in nanosilver-impregnated and thermally-modified beech (Fagus orientalis L.) wood

Sepiolite is a silicate mineral that improves the fire properties in solid wood when mixed with a water-based coating. The present study was carried out to investigate and evaluate the effects of sepiolite addition to acrylic-latex paint on the pull-off adhesion strength, as an important characteristic of paints and finishes used in the modern furniture industry and historical furniture as well for preservation and restoration of heritage objects. Sepiolite was added at the rate of 10%, and brushed onto plain-sawn beech (Fagus orientalis L.) wood specimens, unimpregnated and impregnated with a 400 ppm silver nano-suspension, which were further thermally modified at 185 °C for 4 h. The results showed that thermal modification had a decreasing effect on the pull-off adhesion strength, primarily as a result of the thermal degradation of cell-wall polymers (mostly hemicelluloses). Still, a decreased wettability as a result of condensation and plasticization of lignin was also partially influential. Based on the obtained results,thermal modification was found to have a significant influence on pull-off adhesion strength. Sepiolite addition had a decreasing effectin all treatments, though the effect was not statistically significant in all treatments. The maximum and minimum decreases due to sepiolite addition were observed in the unimpregnated control (21%) and the thermally-modified NS-impregnated (4%) specimens. Other aspects of the sepiolite addition, and further studies that cover different types of paints and coatings, should be evaluated before coming to a final firm conclusion in this regard.

Performance of Particleboard Made of Agroforestry Residues Bonded with Thermosetting Adhesive Derived from Waste Styrofoam

This paper investigated the upcycling process of thermoplastic waste polystyrene (WPS) into thermosetting particleboard adhesive using two cross-linkers, namely methylene diphenyl diisocyanate (MDI) and maleic anhydride (MA). The WPS was dissolved in an organic co-solvent. The weight ratio of WPS/co-solvent was 1:9, and 10% of cross-linkers based on the WPS solids content were added subsequently at 60 °C under continuous stirring for 30 min. The adhesive properties, cohesion strength, and thermo-mechanical properties of WPS-based adhesives were examined to investigate the change of thermoplastic WPS to thermosetting adhesives. The bonding strength of WPS-based adhesives was evaluated in particleboard made of sengon (Falcataria moluccana (Miq.) Barneby & J.W. Grimes) wood and rice straw particles at different weight ratios according to the Japanese Industrial Standard (JIS) A 5908:2003. Rheology and Dynamic Mechanical Analysis revealed that modification with MDI and MA resulted in thermosetting properties in WPS-based adhesives by increasing the viscosity at a temperature above 72.7 °C and reaching the maximum storage modulus above 90.8 °C. WPS modified with MDI had a lower activation energy (Ea) value (83.4 kJ/mole) compared to the WPS modified with MA (150.8 kJ/mole), indicating the cross-linking with MDI was much faster compared with MA. Particleboard fabricated from 100% sengon wood particles bonded with WPS modified with MDI fulfilled the minimum requirement of JIS A 5908:2003 for interior applications.

Improved Measurement of CP Violation Parameters in B_{s}^{0}→J/ψK^{+}K^{-} Decays in the Vicinity of the ϕ(1020) Resonance

The decay-time-dependent CP asymmetry in B_{s}^{0}→J/ψ(→μ^{+}μ^{-})K^{+}K^{-} decays is measured using proton-proton collision data, corresponding to an integrated luminosity of 6  fb^{-1}, collected with the LHCb detector at a center-of-mass energy of 13 TeV. Using a sample of approximately 349 000 B_{s}^{0} signal decays with an invariant K^{+}K^{-} mass in the vicinity of the ϕ(1020) resonance, the CP-violating phase ϕ_{s} is measured, along with the difference in decay widths of the light and heavy mass eigenstates of the B_{s}^{0}-B[over ¯]_{s}^{0} system, ΔΓ_{s}, and the difference of the average B_{s}^{0} and B^{0} meson decay widths, Γ_{s}-Γ_{d}. The values obtained are ϕ_{s}=-0.039±0.022±0.006  rad, ΔΓ_{s}=0.0845±0.0044±0.0024  ps^{-1}, and Γ_{s}-Γ_{d}=-0.0056_{-0.0015}^{+0.0013}±0.0014  ps^{-1}, where the first uncertainty is statistical and the second systematic. These are the most precise single measurements to date and are consistent with expectations based on the Standard Model and with the previous LHCb analyses of this decay. These results are combined with previous independent LHCb measurements. The phase ϕ_{s} is also measured independently for each polarization state of the K^{+}K^{-} system and shows no evidence for polarization dependence.

Socio-economic factors and medical conditions affecting regular stomach cancer screening in Korea: a retrospective longitudinal study using national public health data for 11 years

OBJECTIVE

This study aimed to explore socio-economic factors and medical conditions that affect regular stomach cancer (SC) screening among Korean adults.

STUDY DESIGN

This was a retrospective observational study.

METHODS

Study subjects were 5545 adults aged ≥40 years who participated in the 2007-2012 Korean National Health and Nutrition Examination Survey and were followed up to year 2017 based on data linking to the Korean National Health Insurance Service and Korean Health Insurance Review and Assessment. Socio-economic factors included sex, age, residential area, education, occupation, marital status, disability, public and private health insurance, service through local public health organizations, history of cancer except for SC, and family history of SC. Medical factors included six gastric lesions with the possibility of facilitating SC screening, including benign gastric neoplasm, chronic atrophic gastritis, gastric polyp, Helicobacter pylori infection, intestinal metaplasia, and peptic ulcers. The outcome was adherence to SC screening, which was divided into non-adherence, irregular adherence, and regular adherence.

RESULTS

After adjusting for the effects of socio-economic factors, multivariate ordinal logistic regression revealed that participants with a history of four types of gastric lesions were more likely to regularly participate in SC screening: chronic atrophic gastritis (odds ratio [OR] 1.567; 95% confidence interval [CI] = 1.276-1.923), gastric polyps (OR 1.565; 95% CI = 1.223-2.003), H. pylori infection (OR 1.637; 95% CI = 1.338-2.003), and peptic ulcer (OR 2.226; 95% CI 1.750-2.831).

CONCLUSIONS

To improve participation in SC screening, it is necessary to implement personalized strategies for individuals at risk for gastric cancer in addition to population-based strategies for vulnerable groups.

Measurement of CP Violation in B^{0}→ψ(→ℓ^{+}ℓ^{-})K_{S}^{0}(→π^{+}π^{-}) Decays

A measurement of time-dependent CP violation in the decays of B^{0} and B[over ¯]^{0} mesons to the final states J/ψ(→μ^{+}μ^{-})K_{S}^{0}, ψ(2S)(→μ^{+}μ^{-})K_{S}^{0} and J/ψ(→e^{+}e^{-})K_{S}^{0} with K_{S}^{0}→π^{+}π^{-} is presented. The data correspond to an integrated luminosity of 6  fb^{-1} collected at a center-of-mass energy of sqrt[s]=13  TeV with the LHCb detector. The CP-violation parameters are measured to be S_{ψK_{S}^{0}}=0.717±0.013(stat)±0.008(syst) and C_{ψK_{S}^{0}}=0.008±0.012(stat)±0.003(syst). This measurement of S_{ψK_{S}^{0}} represents the most precise single measurement of the CKM angle β to date and is more precise than the current world average. In addition, measurements of the CP-violation parameters of the individual channels are reported and a combination with the LHCb Run 1 measurements is performed.

Facile preparation of high-performance plywood adhesive from gelatinized corn starch crosslinked with ammonium dihydrogen phosphate

A flame retardant high-performance gelatinized starch (GS)-ammonium dihydrogen phosphate (ADP) wood adhesive, named GS-ADP adhesive was prepared by condensation of GS and ADP under acidic condition. The preparation process of GS-ADP adhesive is very simple by mixing and stirring GS and ADP evenly at room temperature. The results revealed that the GS-ADP adhesive has good storage stability and water resistance, and its wet shear strength is much higher than that of phenolic resin (PF) adhesive. Markedly, the cone calorimeter test results show that G-ADP adhesive has good flame retardancy, and the plywood based on GS-ADP adhesive has good flame retardancy. Meanwhile, it can be seen from dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) that GS-ADP has excellent modulus of elasticity (MOE), high glass transition temperature (Tg) and good thermal stability. The findings suggest that GS-ADP could be a viable substitute for PF resin in structural wood fabrication.

Search for Boosted Dark Matter in COSINE-100

We search for energetic electron recoil signals induced by boosted dark matter (BDM) from the galactic center using the COSINE-100 array of NaI(Tl) crystal detectors at the Yangyang Underground Laboratory. The signal would be an excess of events with energies above 4 MeV over the well-understood background. Because no excess of events are observed in a 97.7  kg·yr exposure, we set limits on BDM interactions under a variety of hypotheses. Notably, we explored the dark photon parameter space, leading to competitive limits compared to direct dark photon search experiments, particularly for dark photon masses below 4 MeV and considering the invisible decay mode. Furthermore, by comparing our results with a previous BDM search conducted by the Super-Kamionkande experiment, we found that the COSINE-100 detector has advantages in searching for low-mass dark matter. This analysis demonstrates the potential of the COSINE-100 detector to search for MeV electron recoil signals produced by the dark sector particle interactions.

Observation of New Baryons in the Ξ_{b}^{-}π^{+}π^{-} and Ξ_{b}^{0}π^{+}π^{-} Systems

The first observation and study of two new baryonic structures in the final state Ξ_{b}^{0}π^{+}π^{-} and the confirmation of the Ξ_{b}(6100)^{-} state in the Ξ_{b}^{-}π^{+}π^{-} decay mode are reported using proton-proton collision data collected by the LHCb experiment, corresponding to an integrated luminosity of 9  fb^{-1}. In addition, the properties of the known Ξ_{b}^{*0}, Ξ_{b}^{'-} and Ξ_{b}^{*-} resonances are measured with improved precision. The new decay mode of the Ξ_{b}^{0} baryon to the Ξ_{c}^{+} π^{-} π^{+} π^{-} final state is observed and exploited for the first time in these measurements.

Precision Measurement of CP Violation in the Penguin-Mediated Decay B_{s}^{0}→ϕϕ

A flavor-tagged time-dependent angular analysis of the decay B_{s}^{0}→ϕϕ is performed using pp collision data collected by the LHCb experiment at the center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 6  fb^{-1}. The CP-violating phase and direct CP-violation parameter are measured to be ϕ_{s}^{ss[over ¯]s}=-0.042±0.075±0.009  rad and |λ|=1.004±0.030±0.009, respectively, assuming the same values for all polarization states of the ϕϕ system. In these results, the first uncertainties are statistical and the second systematic. These parameters are also determined separately for each polarization state, showing no evidence for polarization dependence. The results are combined with previous LHCb measurements using pp collisions at center-of-mass energies of 7 and 8 TeV, yielding ϕ_{s}^{ss[over ¯]s}=-0.074±0.069  rad and |λ|=1.009±0.030. This is the most precise study of time-dependent CP violation in a penguin-dominated B meson decay. The results are consistent with CP symmetry and with the standard model predictions.

Measurement of the Λ_{b}^{0}→Λ(1520)μ^{+}μ^{-} Differential Branching Fraction

The branching fraction of the rare decay Λ_{b}^{0}→Λ(1520)μ^{+}μ^{-} is measured for the first time, in the squared dimuon mass intervals q^{2}, excluding the J/ψ and ψ(2S) regions. The data sample analyzed was collected by the LHCb experiment at center-of-mass energies of 7, 8, and 13 TeV, corresponding to a total integrated luminosity of 9  fb^{-1}. The result in the highest q^{2} interval, q^{2}>15.0  GeV^{2}/c^{4}, where theoretical predictions have the smallest model dependence, agrees with the predictions.

Interpretable Machine Learning for Predicting Symptomatic Pneumonitis in Locally Advanced Non-Small Cell Lung Cancer Patients Treated with Concurrent Chemoradiotherapy and Immune Checkpoint Inhibitor Consolidation

PURPOSE/OBJECTIVE(S)

The rate of grade 2 and higher pneumonitis has increased with the use of immune checkpoint inhibitors (ICI) following chemoradiotherapy (CRT) for lung cancer, which may alter previously established dose-volume constraints (DVC). In this study, we used an interpretable machine learning model with clinical and dosimetric features to predict grade 2+ pneumonitis and determine DVC associated with pneumonitis for locally advanced non-small cell lung cancer (LA-NSCLC) radiotherapy (RT).

MATERIALS/METHODS

Between October 2017 and December 2021, 223 consecutively treated patients with LANSCLC treated with CRT and ICI were retrospectively reviewed. The dataset was split into training and test sets (n = 144/79). Clinical features included age, sex, smoking status, pack-years, BMI, ECOG PS, COPD, tumor location, delivered dose, RT technique, chemotherapy agent and volume of GTVp/GTVn. A total of 228 dosimetric features from the heart, contralateral/ipsilateral lung and lungs-IGTV were extracted, including the minimum/mean dose to the hottest x% volume (Dx%[Gy]/MOHx%[Gy]; x was 5-95 in 5% increments) and minimum/mean/maximum dose and percent volume receiving at least xGy (VxGy [%]; x was 5-60 in 5Gy increments), as well as the overlapping volume of each structure with PTV and the distance from each structure to GTVp/GTVn. Feature selection was performed using Boruta, followed by collinearity removal based on the variance inflation factor. The explainable boosting machine (EBM) was trained on the selected features. The performance of EBM on the test set was evaluated using the area under the receiver operating characteristic curve (AUC) and compared with that of blackbox (BB) models, including extreme gradient boosting (XGB), random forest (RF), and supporting vector machine (SVM). The global explanation of each feature's contribution to the predictions provided by the EBM was used to determine DVC. Shapley additive explanations (SHAP) were used to explain BB predictions.

RESULTS

Selected features, ranked in order of EBM's overall feature importance, were V25Gy [%] and MOH65%[Gy] in the ipsilateral lung, the maximum dose in the heart, MOH30%[Gy] in the contralateral lung, and BMI. No dosimetric features in the lungs-IGTV were selected. The SHAP values of three BB models showed similar trends to the feature importance of the EBM. The global explanations of the EBM suggested that to mitigate the risk of pneumonitis, the ipsilateral lung should have V25Gy [%] < 36.8% and MOH65%[Gy] < 39.5Gy, and the heart should have D0.03cc [Gy] < 66.0Gy. Furthermore, an increased risk of pneumonitis was indicated with an increase in BMI, and, surprisingly, a decrease in MOH30%[Gy] in the contralateral lung. The EBM showed the best performance for predicting grade 2+ pneumonitis (AUC = 0.739), followed by RF, SVM, and XGB (AUC = 0.735, 0.733, and 0.717).

CONCLUSION

EBM has the potential to predict grade 2+ pneumonitis in LA-NSCLC patients treated with CRT and ICI, while providing guidance on DVC.

Association of Cardiac Dose with Cardiac Events and Survival for Locally Advanced Non-Small Cell Lung Cancer (LA-NSCLC) Treated with Concurrent Chemoradiotherapy (cCRT) in the Era of Immune Checkpoint Inhibitor (ICI) Consolidation

PURPOSE/OBJECTIVE(S)

To assess the association of cardiac dose with post-cCRT cardiac events and survival among patients (pts) with LA-NSCLC after adoption of ICI consolidation, modern radiotherapy (RT) techniques, and data-driven cardiac constraints.

MATERIALS/METHODS

This single-institution, multi-site retrospective study included 335 pts with LA-NSCLC treated with definitive cCRT (60-70 Gy) from October 2017 to December 2021. Pts were evaluated for ICI consolidation. Cardiac dose constraints included heart volume receiving ≥50 Gy (V50) <25% and mean heart dose (MHD) <20 Gy. Heart, left anterior descending artery (LAD), and left ventricle were autocontoured, manually reviewed, and edited. 21 dosimetric parameters (mean dose, max dose, and min dose to the hottest x% volume [Dx%(Gy); x from 5-95 in 5% intervals]) for each were extracted, as well as LAD V15. Baseline cardiovascular disease (bCVD) was defined as heart failure (HF), coronary artery disease, peripheral vascular disease, or cerebrovascular disease. Primary endpoint was post-cCRT major adverse cardiac events (MACE), defined as acute coronary syndrome, HF hospitalization/urgent visit, coronary revascularization, or cardiac death. Secondary endpoints were grade ≥3 cardiac events (CTCAE v5.0), overall survival (OS), cancer specific mortality (CSM), and other cause mortality (OCM). Competing risk regression was used for MACE and grade ≥3 cardiac events, and Cox regression for OS, CSM, and OCM.

RESULTS

Median age was 68 years, 139 (41%) had bCVD, and 225 (67%) received consolidation ICI. Proton therapy was used in 117 (35%), intensity-modulated RT in 199 (59%), and 3D conformal RT in 19 (6%). Median MHD was 8.7 Gy (IQR 4.6-14.4) and median LAD V15 1.4% (IQR 0-22). Median follow-up was 39.5 months. 35 MACE events occurred; 1- and 2-year cumulative incidence (CI) were 4.2% and 9.5%. No cardiac dosimetric parameter associated with MACE after adjusting for bCVD and age (e.g., MHD sHR 0.98/Gy, 95% CI 0.93-1.03, p = 0.43) or within the following 3 subgroups: no bCVD, photon therapy, and ICI consolidation. 87 grade ≥3 cardiac events occurred; 1- and 2- year CI were 12.6% and 20.4%. Heart dose was not associated with grade ≥3 cardiac events after adjusting for bCVD, ECOG, and BMI (e.g., MHD sHR 1.00/Gy, 95% CI 0.97-1.03, p = 0.85) or within the 3 aforesaid subgroups. 183 OS events occurred, including 125 CSM and 58 OCM events. Multiple cardiac dosimetric parameters associated with worse OS on multivariable analysis (e.g., LAD V15 HR 1.01/%, 95% CI 1.00-1.02, p = 0.003), driven by associations with CSM (LAD V15 HR 1.02/%, p<0.001) but not OCM (LAD V15 HR 1.00/%, p = 0.73). Median OS was worse for LAD V15 ≥10% (22.2 vs 35.1 months, p = 0.004).

CONCLUSION

Among pts with LA-NSCLC treated with cCRT after adoption of ICI consolidation, modern RT techniques, and cardiac constraints, post-cCRT cardiac events were common but showed no association with cardiac dose. Cardiac dose associated with OS, driven by an association with CSM and not OCM, which may not reflect cardiac toxicity.

Stereotactic Body Radiation Therapy for Large Volume Solid Tumor Spinal Metastases Involving Three or More Contiguous Vertebral Levels

PURPOSE/OBJECTIVE(S)

Data for treating 3 or more contiguous vertebral bodies with SBRT is limited. The purpose of this study was to explore oncologic outcomes and toxicity of spine SBRT delivered to large volume solid tumor metastases involving 3 or more contiguous vertebral levels.

MATERIALS/METHODS

Patients treated with spine SBRT for vertebral metastases involving 3 or more contiguous levels between 2009 and 2021 were retrospectively reviewed. Data on demographics, dosimetry, toxicity, and outcomes were collected. Radiographic local failure was defined as progressive disease on CT and/or MRI in the treatment volume compared to the pre-SBRT baseline. Local control (LC) and overall survival (OS) were calculated from end of SBRT using the Kaplan-Meier and log-rank test.

RESULTS

A total of 141 patients were included with a median follow-up of 9.7 months. The majority of patients had either 3 (74%) or 4 (16%) involved contiguous vertebral levels. Twenty-two percent, 57%, 14%, and 7% of treated lesion began in the cervical, thoracic, lumbar, and sacral vertebral levels, respectively. The most common primary sites were NSCLC (15.6%), kidney (14.9%), and breast (13.5%). Thirty-two percent of patients had prior external beam radiation to the same vertebral level, 63% had prior surgery, and 43% had prior vertebral fracture. Paraspinal extension was identified in 26% at time of SBRT. Median pre-SBRT Bilsky grade was 2 (range 0-3). The median total prescription dose was 27 Gy (range: 12-43 Gy) with the most common dose (Gy)/fractionation schedules of 27/5 (32%), 30/5 (25%), and 25/5 (18%). The median Dmax was 4727 cGy (range 2070-7857) with a median prescription isodose of 58% (range 48-97). The median OS was 12.4 months (95% CI 9.6-15.3). 1- and 2- year OS were 51% and 35%, respectively. Local progression occurred across all histologies, most commonly in colon and NSCLC (16.7%). 1- and 2-year LC were 70% and 57%, respectively. In the radiation-naïve cohort, 1- and 2-year LC were 75% and 63%, respectively and 52% and 34% in the prior radiation group with no statistically significant difference in time to local progression (p = 0.075). There was no statistically significant difference in LC when comparing 3 versus 4 or more contiguous lesions (p = 0.66). Forty percent of patients that progressed underwent salvage treatment (58% surgery, 33% SBRT, 8% systemic therapy). Post-SBRT vertebral compression fracture rate was 11.6%.

CONCLUSION

We present the largest series to date of patients treated with SBRT for large volume spinal metastases involving 3 or more contiguous levels. These data suggest reasonable local control and low toxicity with SBRT; therefore, SBRT should be considered a practical modality to offer this cohort.

Multitask AI Models for the Joint Prediction of Overall Survival, Progression-Free Survival, and Death without Progression as a Composite Endpoint for LA-NSCLC Patients Treated with Chemoradiotherapy

PURPOSE/OBJECTIVE(S)

Prior methods model the risk of endpoints separately. Herein, we construct a composite AI model that considers multiple endpoints jointly, including overall survival (OS), progression-free survival (PFS), and death without progression (DWP). Our hypothesis is that the composite model potentially improves predictive performance for patients with locally advanced non-small cell lung cancer (LANSCLC) treated with chemoradiotherapy (CRT).

MATERIALS/METHODS

A total of 335 LANSCLC patients treated with definitive CRT, including all evaluable patients accrued from Oct 2017 to Dec 2021, were randomly split into training/test subsets (n = 234/101). Cardio-pulmonary substructures (CPSs) were autocontoured, manually reviewed, and edited if necessary. A total of 1093 non-independent dosimetric parameters were extracted, including GTVp, GTVn, GTV, PTV, esophagus, lungs minus IGTV, left/right lung, 15 CPSs, and the overlapping volume of each OAR with PTV and the distance from each OAR to GTVp/GTVn. Other clinical parameters included age, consolidation immunotherapy (CI), ECOG score, Charlson comorbidity index, coronary heart disease, histology, PD-L1 expression, and clinical stage (AJCC 8). Within training, censored time-to-event data were imputed based on conditional event distributions derived from Kaplan-Meier estimators for casting survival analysis as a regression problem and training neural additive model (NAM) regressors. Features were selected by LASSO regression for a single endpoint (OS, PFS, DWP) and multi-task (MT) LASSO regression for four separate composite endpoints (OS-PFS, OS-DWP, PFS-DWP, OS-PFS-DWP). The performance of MT NAMs in the test set that jointly predicted the composite endpoints was evaluated using the C-index and compared to that of a single task (ST) NAM that predicted each endpoint separately.

RESULTS

The best testing performance in predicting OS and DWP was attained by the MT NAM that jointly predicted all endpoints (c-index = 0.65, 95% CI 0.58-0.71 for OS; c-index = 0.78, 95% CI 0.69-0.87 for DWP). The best model to predict PFS was also MT between PFS and DWP (c-index = 0.59, 95% CI 0.52-0.65). The c-indices of all ST NAMs were less than 0.56. The best MT NAMs significantly outperformed ST NAMs in predicting OS (p = 0.001) and DWP (p = 0.01) except for PFS (p = 0.32). The best MT NAM in predicting OS and DWP included ECOG score, atria-PTV overlap volume, D75% [Gy] to the left atrium (LA), pulmonary arterial volume, histology (adenocarcinoma), D65% [Gy] to the descending aorta (DA), V10 Gy [%] of the LA and CI in order of overall importance. ECOG score consistently ranked as the most important feature for all four MT NAMs. An increase of ECOG score from 0 to 2 indicated a 6-month earlier risk of mortality and DWP. Atria-PTV overlap volume and D65% [Gy] to the DA were included in all four MT NAMs.

CONCLUSION

MT AI models improved outcome prediction in patients with LANSCLC treated with CRT by jointly learning commonalities between the primary and auxiliary endpoints.

Development of reference material for quality control of uranium analysis in marine sediments

Environmental radioactivity monitoring is strengthening due to public concerns over radioactive contamination since the Fukushima nuclear power plant accident. Therefore, various research laboratories, institutes, and universities have been conducting environmental radioactivity surveys around nuclear power plants (NPPs). However, the reliability of the results continues to trigger controversy in society. This study was conducted to develop reference material (RM) for the quality control of 238U and 234U analyses in marine sediments. The RM was prepared according to ISO Guides 31, 34, and 35. A homogeneity test of the marine sediment RM was implemented by analyzing two batch samples from ten bottles using multiple acid digestion and alkali fusion, respectively. We found that the 238U and 234U reference values of the RM were 43.0 ± 1.7 Bq kg-1(k=1) and 41.5 ± 1.9 Bq kg-1(k=1), respectively. This marine sediment RM will be useful for the quality control of analytical methods for similar samples and proficiency tests.

Interpretable Machine Learning Models for Severe Esophagitis Prediction in LA-NSCLC Patients Treated with Chemoradiation Therapy

PURPOSE/OBJECTIVE(S)

Radiation esophagitis is a common adverse event that may occur during chemoradiotherapy (CRT) that can adversely affect survival. This study aimed to develop interpretable machine learning (ML) models to predict grade 3 and higher radiation esophagitis in patients receiving definitive CRT therapy for locally advanced non-small cell lung cancer (LA-NSCLC).

MATERIALS/METHODS

A total of 335 patients with LA-NSCLC who received definitive concurrent CRT at a single institution from 2017 to 2021 were retrospectively identified. Patients with esophagitis were identified and graded according to CTCAE v5.0. For each patient, 31 clinical features and 1093 dose-volume histogram (DVH) parameters from 19 structures were collected. The data was then randomly split into training (n = 233) and testing (n = 102) datasets. Feature selection was performed on the training dataset using the minimum redundancy maximum relevance algorithm to find a set of relevant features while controlling for the redundancy within the selected features, which were then followed by the Boruta algorithm to remove unimportant features and make the ML model more accurate. Synthetic minority oversampling technique was used to handle class-imbalanced datasets by generating synthetic samples for the minority class. Four variants of the Generalized Additive Model (GAM), including Explainable Boosting Machine (EBM), neural GAM (NODE-GAM), eXtreme Gradient Boosting (XGB)-GAM, and Spline, were built with selected features. The models' performance in predicting esophagitis was evaluated using the area under the receiver operating characteristic curve (AUC) in the test dataset. Shape plots were used to interpret the models' output and explain the selected features' contribution to the prediction.

RESULTS

NODE-GAM yielded the highest performance (F1 score = 0.57, accuracy = 0.8, and AUC = 0.837), followed by EBM (F1 score = 0.43, accuracy = 0.8, and AUC = 0.7), Spline (F1 score = 0.42, accuracy = 0.74, and AUC = 0.737), and XGB-GAM (F1 score = 0.42, accuracy = 0.76, and AUC = 0.71). Selected features included D95%[Gy], D90%[Gy], D65%[Gy] and V40Gy [%] for the esophagus, V10Gy [%] for the pulmonary artery, and the distance from GTVn to the ascending aorta. The analysis of the selected features indicated that an increased radiation dose delivered to the esophagus and a shorter distance between the ascending aorta and GTVn were associated with a higher risk of developing esophagitis.

CONCLUSION

Our study demonstrates the feasibility of developing interpretable ML models to predict esophagitis in patients with LA-NSCLC patients treated with CRT. NODE-GAM provided the best accuracy while providing insights into the driving dosimetric factors that could be used to guide optimal RT planning.

Development of metal radioactive liquid reference material for proficiency test

This study developed liquid reference materials containing various metals, to be used for quality assurance of radiation measurements of the most common metallic wastes generated during the operation or decommissioning of nuclear power plants. The liquid reference materials were prepared by assuming the dissolution of stainless-steel using acid and melting of the major metals present in the stainless steel, namely Fe, Ni, Cr, and Mn, along with the standard sources (134Cs, 137Cs, 60Co, 90Sr). The theoretical massic activity of the standard sources added to the samples and the measured reference values of the gamma and beta emitters in the samples were compared, and they showed good agreement within a one-sigma confidence interval (k = 1). Using the developed reference materials, a proficiency test was conducted on three domestic labs, and the results were evaluated using Z-score. While the evaluation results showed good agreement between the reference values and the reported values for 137Cs and 60Co, all participating labs reported lower values than the reference value for 134Cs. For 90Sr, two out of the three labs reported significantly higher values than the reference value. Based on the results of this study, the developed metal radioactive liquid reference material is expected to be registered as certified reference material (CRM) in the future. They will be used as the CRM for measuring and ensuring the quality of radioactive metal waste.

Proton Beam Therapy (PBT) Versus Intensity-Modulated Radiotherapy (IMRT) for Locally Advanced Non-Small Cell Lung Cancer (LA-NSCLC) in the Era of Immune Checkpoint Inhibitor (ICI) Consolidation: A Retrospective Cohort Study

PURPOSE/OBJECTIVE(S)

Patients (pts) with LA-NSCLC treated with concurrent chemoradiation (cCRT) and ICI consolidation are at high risk for treatment-related toxicities and subsequent hospitalization. We hypothesized that PBT is associated with a reduction in acute unplanned hospitalizations as compared to IMRT in the era of ICI consolidation.

MATERIALS/METHODS

This single institution, multi-site retrospective study included consecutive pts with LA-NSCLC treated with definitive cCRT with either PBT or IMRT from October 2017 to December 2021. Pts were evaluated for consolidative ICI. Primary endpoint was unplanned treatment-related hospitalization within 90 days of first radiation (RT) treatment. Secondary endpoints included grade 3+ pneumonitis, grade 3+ esophagitis, PFS and OS. Logistic regression was used to assess associations with 90-day hospitalization. Competing risk regression was used for grade 3+ pneumonitis and esophagitis, and Cox regression for PFS and OS.

RESULTS

A total of 316 pts were included: 117 (37%) received PBT and 199 (63%) IMRT. Median age was 68.5 yrs; median RT dose 66.6 Gy (IQR 65.9-70.0). PBT group was older (median 71.1 vs 67.2 yrs, p<0.005) and had a higher Charlson comorbidity index (CCI) (median 4 vs 3, p = 0.02). There was no significant difference in ECOG, smoking pack-years, T stage, N stage, target volume size, or receipt of ICI consolidation (66.7% vs 68.3%, p = 0.76). PBT group had lower mean heart dose (5.9 vs 10.8 Gy, p<0.001), LAD V15 (0 vs 6 %, p = 0.001), mean lung dose (14.7 vs 15.7 Gy, p <0.008) and effective dose to immune circulating cells (median 3.7 vs 4.9 Gy, p<0.001) but not mean esophagus dose. PBT was associated with fewer unplanned 90-day hospitalizations (23.9% vs 34.7%); which persisted on multivariable analysis (OR 0.52, 95% CI 0.30-0.90, p = 0.02) after adjusting for CCI, smoking pack-years, T4 tumors and target volume. Reasons for hospitalization in PBT and IMRT groups included progression (1.7% vs 1.5%), definite/probable toxicity from cCRT (11.1% vs 18.6%), possible toxicity from cCRT (7.7% vs 12.6%) or unrelated to cCRT (3.4% vs 2.0%). There was no significant difference between PBT or IMRT groups in G3+ pneumonitis (1-year 6.0% vs 9.1%, p = 0.49), G3+ esophagitis (1-year 6.0% vs 6.5%, p = 0.71), PFS (median 14.4 vs 15.1 months, p = 0.69), or OS (median 34.2 vs 29.4 months, p = 0.41).

CONCLUSION

Among pts with LA-NSCLC treated with cCRT in the era of ICI consolidation, PBT was associated with fewer acute unplanned hospitalizations compared to IMRT. There was no difference in G3+ pneumonitis, G3+ esophagitis, PFS or OS.

Patterns of Failure, Volume of Disease Progression, and Subsequent Ablative Management in Locally Advanced Non-Small Cell Lung Cancer (LA-NSCLC) Treated with Definitive Chemoradiation and Consolidation Immune Checkpoint Inhibitors (ICI)

PURPOSE/OBJECTIVE(S)

For patients (pts) with LA-NSCLC treated with chemoradiation and consolidation ICI (CRT+ICI), the patterns of failure (POF) and volume of disease progression (PD) are not well characterized. The primary objective of this study was to classify POFs, the frequency of low volume relapse (LVR), and identify pts eligible for further ablative therapy.

MATERIALS/METHODS

We retrospectively identified pts with unresectable stage III NSCLC treated with CRT+ICI between October 2017 and December 2021 at a single institution. Site of first failure was classified as locoregional (LRF), distant (DF), or synchronous LRF + DF. Any LRF was subclassified as in field (IFF; PD within 90% isodose line), marginal (MF; within 50% isodose line) or out of field (OOF; outside of 50% isodose line). LVR was defined as < 3 discrete sites of PD in any number or location of organs. Pts with distant LVR were considered to have oligometastatic relapse. Ablative candidates were defined as pts with < 3 discrete sites of PD amenable to further RT or surgery. Cumulative incidence of PD was calculated with death as a competing risk. Progression free survival (PFS) and overall survival (OS) were calculated from the end of RT and assessed via Kaplan Meier. Multivariable Cox modeling was used to assess correlation of pt characteristics and time-to-event outcomes. Logistic regression was used to predict variables associated with LVR.

RESULTS

A total of 229 pts received CRT+ICI. Median follow up was 39 months and 119 pts experienced PD. Median PFS and OS were 18.4 and 34.5 months, respectively. Of pts with PD, 71 (60%) had DF, 28 (24%) had LRF+DF, and 20 (17%) had LRF. Of pts with any LRF, 28 (57%) had IFF, 10 (21%) had MF, and 10 (21%) had OOF. Estimated 1-year cumulative incidence of LRF, DF, and LRF+DF were 9.3% (95% CI 4.5-16), 39% (95% CI 31-48), and 19% (95% CI 12-27), respectively. A total of 63 (53%) pts had LVR. In pts with LVR, 19 (30%) had isolated thoracic relapse and 44 (69%) had oligometastatic relapse. Most oligometastatic disease was intracranial (22 metastases, 44%). Pts with LVR had a longer median OS vs pts with high volume relapse (37.4 vs 15.2 months, p<0.001). At time of PD, 56 (47%) pts were candidates for further ablative therapies. Subsequent anticancer therapies were local therapy alone (35%), local and systemic therapy (16%), systemic therapy alone (36%), or no therapy (13%). On multivariable analysis, LVR (HR 0.39; 95% CI 0.21-0.73, p = 0.003) and longer receipt of ICI (HR 0.96; 95% CI 0.95-0.98; p<0.001) were associated with improved survival while squamous histology (HR 2.26; 95% CI 1.18-4.32; p = 0.039) was associated with worse survival. Longer receipt of ICI was the only variable predictive for the development of LVR (OR 1.03; 95% CI 1.01-1.05; p = 0.004).

CONCLUSION

This is the largest real-world series reporting POF after CRT+ICI for stage III NSCLC. Approximately half of pts experience LVR and are candidates for further ablative therapy. Further data are needed to define optimal treatment strategies for pts with LVR after CRT+ICI.

Observation of New Ω_{c}^{0} States Decaying to the Ξ_{c}^{+}K^{-} Final State

Two new excited states, Ω_{c}(3185)^{0} and Ω_{c}(3327)^{0}, are observed in the Ξ_{c}^{+}K^{-} invariant-mass spectrum using proton-proton collision data collected by the LHCb experiment, corresponding to an integrated luminosity of 9  fb^{-1}. Five previously observed excited Ω_{c}^{0} states are confirmed, namely Ω_{c}(3000)^{0}, Ω_{c}(3050)^{0}, Ω_{c}(3065)^{0}, Ω_{c}(3090)^{0}, and Ω_{c}(3119)^{0}. The masses and widths of these seven states are measured with the highest precision to date.

Evidence of a J/ψK_{S}^{0} Structure in B^{0}→J/ψϕK_{S}^{0} Decays

An amplitude analysis of B^{0}→J/ψϕK_{S}^{0} decays is performed using proton-proton collision data, corresponding to an integrated luminosity of 9  fb^{-1}, collected with the LHCb detector at center-of-mass energies of 7, 8, and 13 TeV. Evidence with a significance of 4.0 standard deviations of a structure in the J/ψK_{S}^{0} system, named T_{ψs1}^{θ}(4000)^{0}, is seen, with its mass and width measured to be 3991_{-10}^{+12} _{-17}^{+9}  MeV/c^{2} and 105_{-25}^{+29} _{-23}^{+17}  MeV, respectively, where the first uncertainty is statistical and the second systematic. The T_{ψs1}^{θ}(4000)^{0} state is likely to be the isospin partner of the T_{ψs1}^{θ}(4000)^{+} state, previously observed in the J/ψK^{+} system of the B^{+}→J/ψϕK^{+} decay. When isospin symmetry for the charged and neutral T_{ψs1}^{θ}(4000) states is assumed, the signal significance increases to 5.4 standard deviations.

Latest Advancements in the Development of High-Performance Lignin- and Tannin-Based Non-Isocyanate Polyurethane Adhesive for Wood Composites

The depletion of natural resources and increasing environmental apprehension regarding the reduction of harmful isocyanates employed in manufacturing polyurethanes (PUs) have generated significant attention from both industrial and academic sectors. This attention is focused on advancing bio-based non-isocyanate polyurethane (NIPU) resins as viable and sustainable substitutes, possessing satisfactory properties. This review presents a comprehensive analysis of the progress made in developing bio-based NIPU polymers for wood adhesive applications. The main aim of this paper is to conduct a comprehensive analysis of the latest advancements in the production of high-performance bio-based NIPU resins derived from lignin and tannin for wood composites. A comprehensive evaluation was conducted on scholarly publications retrieved from the Scopus database, encompassing the period from January 2010 to April 2023. In NIPU adhesive manufacturing, the exploration of substitute materials for isocyanates is imperative, due to their inherent toxicity, high cost, and limited availability. The process of demethylation and carbonation of lignin and tannin has the potential to produce polyphenolic compounds that possess hydroxyl and carbonyl functional groups. Bio-based NIPUs can be synthesized through the reaction involving diamine molecules. Previous studies have provided evidence indicating that NIPUs derived from lignin and tannin exhibit enhanced mechanical properties, decreased curing temperatures and shortened pressing durations, and are devoid of isocyanates. The characterization of NIPU adhesives based on lignin and tannin was conducted using various analytical techniques, including Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), matrix-assisted laser desorption/ionization with time-of-flight (MALDI-TOF) mass spectrometry, and gel permeation chromatography (GPC). The adhesive performance of tannin-based NIPU resins was shown to be superior to that of lignin-based NIPUs. This paper elucidates the potential of lignin and tannin as alternate sources for polyols in the manufacturing of NIPUs, specifically for their application as wood adhesives.

Measurement of the Ratios of Branching Fractions R(D^{*}) and R(D^{0})

The ratios of branching fractions R(D^{*})≡B(B[over ¯]→D^{*}τ^{-}ν[over ¯]_{τ})/B(B[over ¯]→D^{*}μ^{-}ν[over ¯]_{μ}) and R(D^{0})≡B(B^{-}→D^{0}τ^{-}ν[over ¯]_{τ})/B(B^{-}→D^{0}μ^{-}ν[over ¯]_{μ}) are measured, assuming isospin symmetry, using a sample of proton-proton collision data corresponding to 3.0  fb^{-1} of integrated luminosity recorded by the LHCb experiment during 2011 and 2012. The tau lepton is identified in the decay mode τ^{-}→μ^{-}ν_{τ}ν[over ¯]_{μ}. The measured values are R(D^{*})=0.281±0.018±0.024 and R(D^{0})=0.441±0.060±0.066, where the first uncertainty is statistical and the second is systematic. The correlation between these measurements is ρ=-0.43. The results are consistent with the current average of these quantities and are at a combined 1.9 standard deviations from the predictions based on lepton flavor universality in the standard model.

Measurement of the Prompt D^{0} Nuclear Modification Factor in p-Pb Collisions at sqrt[s_{NN}]=8.16 TeV

The production of prompt D^{0} mesons in proton-lead collisions in both the forward and backward rapidity regions at a center-of-mass energy per nucleon pair of sqrt[s_{NN}]=8.16  TeV is measured by the LHCb experiment. The nuclear modification factor of prompt D^{0} mesons is determined as a function of the transverse momentum p_{T}, and the rapidity in the nucleon-nucleon center-of-mass frame y^{*}. In the forward rapidity region, significantly suppressed production with respect to pp collisions is measured, which provides significant constraints on models of nuclear parton distributions and hadron production down to the very low Bjorken-x region of ∼10^{-5}. In the backward rapidity region, a suppression with a significance of 2.0-3.8 standard deviations compared to parton distribution functions in a nuclear environment expectations is found in the kinematic region of p_{T}>6  GeV/c and -3.25 Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Measurement of the Time-Integrated CP Asymmetry in D^{0}→K^{-}K^{+} Decays

The time-integrated CP asymmetry in the Cabibbo-suppressed decay D^{0}→K^{-}K^{+} is measured using proton-proton collision data, corresponding to an integrated luminosity of 5.7  fb^{-1} collected at a center-of-mass energy of 13 TeV with the LHCb detector. The D^{0} mesons are required to originate from promptly produced D^{*+}→D^{0}π^{+} decays, and the charge of the companion pion is used to determine the flavor of the charm meson at production. The time-integrated CP asymmetry is measured to be A_{CP}(K^{-}K^{+})=[6.8±5.4±1.6]×10^{-4} where the first uncertainty is statistical and the second systematic. The direct CP asymmetries in D^{0}→K^{-}K^{+} and D^{0}→π^{-}π^{+} decays, a_{K^{-}K^{+}}^{d} and a_{π^{-}π^{+}}^{d}, are derived by combining A_{CP}(K^{-}K^{+}) with the time-integrated CP asymmetry difference, ΔA_{CP}=A_{CP}(K^{-}K^{+})-A_{CP}(π^{-}π^{+}), and other inputs, giving a_{K^{-}K^{+}}^{d}=(7.7±5.7)×10^{-4},a_{π^{-}π^{+}}^{d}=(23.2±6.1)×10^{-4},with a correlation coefficient corresponding to ρ=0.88. The compatibility of these results with CP symmetry is 1.4 and 3.8 standard deviations for D^{0}→K^{-}K^{+} and D^{0}→π^{-}π^{+} decays, respectively. This is the first evidence for direct CP violation in a specific D^{0} decay.

Measurement of the Branching Fractions B(B^{0}→pp[over ¯]pp[over ¯]) and B(B_{s}^{0}→pp[over ¯]pp[over ¯])

Searches for the rare hadronic decays B^{0}→pp[over ¯]pp[over ¯] and B_{s}^{0}→pp[over ¯]pp[over ¯] are performed using proton-proton collision data recorded by the LHCb experiment and corresponding to an integrated luminosity of 9  fb^{-1}. Significances of 9.3σ and 4.0σ, including statistical and systematic uncertainties, are obtained for the B^{0}→pp[over ¯]pp[over ¯] and B_{s}^{0}→pp[over ¯]pp[over ¯] signals, respectively. The branching fractions are measured relative to the topologically similar normalization decays B^{0}→J/ψ(→pp[over ¯])K^{*0}(→K^{+}π^{-}) and B_{s}^{0}→J/ψ(→pp[over ¯])⁢ϕ(→K^{+}K^{-}). The branching fractions are measured to be B(B^{0}→pp[over ¯]pp[over ¯])=(2.2±0.4±0.1±0.1)×10^{-8} and B(B_{s}^{0}→pp[over ¯]pp[over ¯])=(2.3±1.0±0.2±0.1)×10^{-8}. In these measurements, the first uncertainty is statistical, the second is systematic, and the third one is due to the external branching fraction of the normalization channel.

Properties of Ramie (Boehmeria nivea (L.) Gaudich) Fibers Impregnated with Non-Isocyanate Polyurethane Resins Derived from Lignin

The textile industries need an alternative to cotton since its supply is unable to keep up with the growing global demand. The ramie (Boehmeria nivea (L.) Gaudich) fiber has a lot of potential as a renewable raw material but has low fire-resistance, which should be improved. In this work, the objectives were to investigate the characteristics of lignin derived from black liquor of kraft pulping, as well as the properties of the developed lignin-based non-isocyanate-polyurethane (L-NIPU), and to analyze ramie fiber before and after impregnation with L-NIPU. Two different formulations of L-NIPU were impregnated into ramie fiber for 30, 60, and 90 min at 25 × 2 °C under 50 kPa. The calculation of the Weight Percent Gain (WPG), Fourier Transform Infrared Spectrometer (FTIR), Rotational Rheometer, Dynamic Mechanical Analyzer (DMA), Pyrolysis Gas Chromatography Mass Spectrometer (Py-GCMS), Universal Testing Machine (UTM), and hydrolysis test were used to evaluate the properties of ramie fibers. The result showed that ramie fiber impregnated with L-NIPU produced higher mechanical property values and WPG than non-impregnated ramie fiber. There is a tendency that the longer impregnation time results in better WPG values, FTIR intensity of the urethane group, thermomechanical properties, crystallinity, and mechanical properties of ramie fiber. However, the use of DMC and HMT cannot replace the role of isocyanates in the synthesis of L-NIPU because it produces lower heat resistance than ramie impregnated using pMDI. Based on the results obtained, the impregnation of ramie fiber with L-NIPU represents a promising approach to increase its wider industrial application as a functional material.

Observation of a Resonant Structure near the D_{s}^{+}D_{s}^{-} Threshold in the B^{+}→D_{s}^{+}D_{s}^{-}K^{+} Decay

An amplitude analysis of the B^{+}→D_{s}^{+}D_{s}^{-}K^{+} decay is carried out to study for the first time its intermediate resonant contributions, using proton-proton collision data collected with the LHCb detector at center-of-mass energies of 7, 8, and 13 TeV. A near-threshold peaking structure, referred to as X(3960), is observed in the D_{s}^{+}D_{s}^{-} invariant-mass spectrum with significance greater than 12 standard deviations. The mass, width, and the quantum numbers of the structure are measured to be 3956±5±10  MeV, 43±13±8  MeV, and J^{PC}=0^{++}, respectively, where the first uncertainties are statistical and the second systematic. The properties of the new structure are consistent with recent theoretical predictions for a state composed of cc[over ¯]ss[over ¯] quarks. Evidence for an additional structure is found around 4140 MeV in the D_{s}^{+}D_{s}^{-} invariant mass, which might be caused either by a new resonance with the 0^{++} assignment or by a J/ψϕ↔D_{s}^{+}D_{s}^{-} coupled-channel effect.

Cohesion and Adhesion Performance of Tannin-Glyoxal Adhesives at Different Formulations and Hardener Types for Bonding Particleboard Made of Areca (Areca catechu) Leaf Sheath

The use of alternative raw materials, such as agricultural biomass and by-products, in particleboard (PB) production is a viable approach to address the growing global demand for sustainable wood-based materials. The purpose of this study was to investigate the effect of the type of hardener and tannin-glyoxal (TG) adhesive formulation on the cohesion and adhesion performance of TG adhesives for areca-based PB. Two types of hardeners were used, NH4Cl and NaOH, and three adhesive formulations with tannin:glyoxal ratios (i.e., F1 (1:2), F2 (1:1), and F3 (2:1)) were applied to improve the cohesion performance and adhesion for areca-based TG adhesive for PB. The basic, chemical, and mechanical properties of the TG adhesive were investigated using a Fourier transform infrared spectrometer, rotational rheometer, dynamic mechanical analyzer (DMA), and X-ray diffractometer. The results show that a high glyoxal percentage increases the percentage of crystallinity in the adhesive. This shows that the increase in glyoxal is able to form better polymer bonds. DMA analysis shows that the adhesive is elastic and the use of NH4Cl hardener has better mechanical properties in thermodynamic changes than the adhesive using NaOH hardener. Finally, the adhesion performance of the TG adhesives on various types of hardeners and adhesive formulations was evaluated on areca-based PB panels. Regardless of the type of hardener, the TG adhesive made with F1 had better cohesion and adhesion properties compared to F2 and F3. Combining F1 with NH4Cl produced areca-based PB panels with better physical and mechanical qualities than the adhesive formulations F2 and F3, and complied with Type 8 particleboard according to SNI 03-2105-2006 standard.

Evidence for Modification of b Quark Hadronization in High-Multiplicity pp Collisions at sqrt[s]=13 TeV

The production rate of B_{s}^{0} mesons relative to B^{0} mesons is measured by the LHCb experiment in pp collisions at a center-of-mass energy sqrt[s]=13  TeV over the forward rapidity interval 2 Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Test of Lepton Universality in b→sℓ^{+}ℓ^{-} Decays

The first simultaneous test of muon-electron universality using B^{+}→K^{+}ℓ^{+}ℓ^{-} and B^{0}→K^{*0}ℓ^{+}ℓ^{-} decays is performed, in two ranges of the dilepton invariant-mass squared, q^{2}. The analysis uses beauty mesons produced in proton-proton collisions collected with the LHCb detector between 2011 and 2018, corresponding to an integrated luminosity of 9  fb^{-1}. Each of the four lepton universality measurements reported is either the first in the given q^{2} interval or supersedes previous LHCb measurements. The results are compatible with the predictions of the Standard Model.

Eosinophil-derived TGFβ1 controls the new bone formation in chronic rhinosinusitis with nasal polyps

BACKGROUND

Chronic rhinosinusitis with nasal polyps (CRSwNP) is characterized by chronic eosinophilic inflammation and new bone formation (NBF). These processes may be associated with each other in the pathogenesis and influence the severity and prognosis of the disease. However, it is still unclear how eosinophilic inflammation is involved in the NBF.

METHODOLOGY

Sinus bone cells were isolated from ethmoid bone tissues of patients with CRSwNP and controls. Transforming growth factor beta 1 (TGFβ1) and alkaline phosphatase (ALP) expression in sinus bone cells was determined using quantitative RT-PCR, immunoblotting, and immunohistochemistry. The co-localization of TGFβ1 with eosinophils was assessed by immunofluorescence staining. Sinus bone cells were co-cultured with eosinophils (Eol-1 cell line), which were differentiated with butyrate, to measure the osteoblast differentiation activity of sinus bone cells.

RESULTS

TGFβ1 expression was increased in sinus bone tissues and correlated with CT scores in CRSwNP. TGFβ1 was also increased in the submucosa of CRSwNP and co-localized predominantly with eosinophils compared with neutrophils Differentiated Eol-1 cells-derived TGFβ1 increased ALP expression in sinus bone cells. Treatment with a TGFβ inhibitor attenuated TGFβ1-induced ALP expression and staining in sinus bone cells of CRSwNP, leading to loss of bone formation.

CONCLUSIONS

Eosinophil-derived TGFβ1 was enriched in the submucosa of CRSwNP, which induced ALP expression in sinus bone cells and NBF. Therefore, eosinophil-derived TGFβ1 may mediate aberrant bone remodeling in CRSwNP.

First Observation of a Doubly Charged Tetraquark and Its Neutral Partner

A combined amplitude analysis is performed for the decays B^{0}→D[over ¯]^{0}D_{s}^{+}π^{-} and B^{+}→D^{-}D_{s}^{+}π^{+}, which are related by isospin symmetry. The analysis is based on data collected by the LHCb detector in proton-proton collisions at center-of-mass energies of 7, 8, and 13 TeV. The full data sample corresponds to an integrated luminosity of 9  fb^{-1}. Two new resonant states with masses of 2.908±0.011±0.020  GeV and widths of 0.136±0.023±0.013  GeV are observed, which decay to D_{s}^{+}π^{+} and D_{s}^{+}π^{-} respectively. The former state indicates the first observation of a doubly charged open-charm tetraquark state with minimal quark content [cs[over ¯]ud[over ¯]], and the latter state is a neutral tetraquark composed of [cs[over ¯]u[over ¯]d] quarks. Both states are found to have spin-parity of 0^{+}, and their resonant parameters are consistent with each other, which suggests that they belong to an isospin triplet.

Search for Rare Decays of D^{0} Mesons into Two Muons

A search for the very rare D^{0}→μ^{+}μ^{-} decay is performed using data collected by the LHCb experiment in proton-proton collisions at sqrt[s]=7, 8, and 13 TeV, corresponding to an integrated luminosity of 9  fb^{-1}. The search is optimized for D^{0} mesons from D^{*+}→D^{0}π^{+} decays but is also sensitive to D^{0} mesons from other sources. No evidence for an excess of events over the expected background is observed. An upper limit on the branching fraction of this decay is set at B(D^{0}→μ^{+}μ^{-})<3.1×10^{-9} at a 90% C.L. This represents the world's most stringent limit, constraining models of physics beyond the standard model.

Nuclear Modification Factor of Neutral Pions in the Forward and Backward Regions in p-Pb Collisions

The nuclear modification factor of neutral pions is measured in proton-lead collisions collected at a center-of-mass energy per nucleon of 8.16 TeV with the LHCb detector. The π^{0} production cross section is measured differentially in transverse momentum (p_{T}) for 1.5 Collapse

Key Words Collapse

MESH Headings Collapse

Grants Collapse

Observation of a J/ψΛ Resonance Consistent with a Strange Pentaquark Candidate in B^{-}→J/ψΛp[over ¯] Decays

An amplitude analysis of B^{-}→J/ψΛp[over ¯] decays is performed using 4400 signal candidates selected on a data sample of pp collisions recorded at center-of-mass energies of 7, 8, and 13 TeV with the LHCb detector, corresponding to an integrated luminosity of 9  fb^{-1}. A narrow resonance in the J/ψΛ system, consistent with a pentaquark candidate with strangeness, is observed with high significance. The mass and the width of this new state are measured to be 4338.2±0.7±0.4  MeV and 7.0±1.2±1.3  MeV, where the first uncertainty is statistical and the second systematic. The spin is determined to be 1/2 and negative parity is preferred. Because of the small Q-value of the reaction, the most precise single measurement of the B^{-} mass to date, 5279.44±0.05±0.07  MeV, is obtained.

Utilization of Recycled Egg Carton Pulp for Nitrocellulose as an Accelerant in Briquette Production

Nitrocellulose (NC) is a conservative material that is used in a variety of applications, such as coating agents, biodegradable plastics, and propellant main charge. Nitrocellulose raw materials are easily obtained from lignocellulose sources, most notably cotton and wood pulp. The egg carton, a recycled paper waste designed for packaging and transporting eggs, is used in this study to make nitrocellulose in pulp form. The effects of different nitration durations (40, 50, and 60 min) from egg carton pulp bleached with various KOH concentrations (0.6 M, 1.0 M, and 1.5 M) on NC properties were evaluated. The accelerant properties of the NC of nitration time in 50 min were studied in a rice husk charcoal briquette. Rice husk charcoal briquettes are made in various ratios with nitrocellulose as an accelerant (97:3, 96:4, and 95:5). The NC was characterized using Fourier transform infrared (IR) spectroscopy and thermogravimetric (TG) analysis. 1.0 M of bleached egg carton pulp has the highest cellulose content (86.94%) with the presence of crystalline structure of cellulose at peak 1430 cm^-1 after the bleaching process. Meanwhile, different nitration times revealed that 50 min had the highest nitrogen content (7.97%) with a 1.23 degree of substitution (DS) value. Based on its TG analysis, NC 50 has met the requirements for use as an accelerant for briquettes, with an onset temperature of 91.60 °C and a weight loss of 62.60%. Infrared at peak 1640 cm^-1 confirmed the presence of NO₂ groups in nitrocellulose successfully formed by nitration. After the addition of nitrocellulose, the calorific value of the briquette increased from 13.54% to 15.47%. Fixed carbon and volatile matter showed the same pattern. The combustion of nitrocellulose-briquette has also been demonstrated by Td10% of degradation, which degraded between 310 and 345 °C.

Measurement of Direct-Photon Cross Section and Double-Helicity Asymmetry at sqrt[s]=510 GeV in p[over →]+p[over →] Collisions

We present measurements of the cross section and double-helicity asymmetry A_{LL} of direct-photon production in p[over →]+p[over →] collisions at sqrt[s]=510  GeV. The measurements have been performed at midrapidity (|η|<0.25) with the PHENIX detector at the Relativistic Heavy Ion Collider. At relativistic energies, direct photons are dominantly produced from the initial quark-gluon hard scattering and do not interact via the strong force at leading order. Therefore, at sqrt[s]=510  GeV, where leading-order-effects dominate, these measurements provide clean and direct access to the gluon helicity in the polarized proton in the gluon-momentum-fraction range 0.02<x<0.08, with direct sensitivity to the sign of the gluon contribution.

Phase-Change-Material-Impregnated Wood for Potential Energy-Saving Building Materials

PCMs (phase change materials) are ideal for thermal management solutions in buildings. This is because they release and store thermal energy during melting and freezing. When this material freezes, it releases a lot of energy in the form of latent heat of fusion or crystallization energy. Conversely, when the material melts, it absorbs the same amount of energy from its surroundings as it changes from a solid to a liquid state. In this study, Oriental spruce (Picea orientalis L.) sapwood was impregnated with three different commercial PCMs. The biological properties and the hygroscopic and thermal performance of the PCM-impregnated wood were studied. The morphology of PCM-impregnated wood was characterized through the use of scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). PCM-impregnated wood demonstrated low performance in terms of storing and releasing heat during phase change processes, as confirmed by DSC. The results show that PCMs possess excellent thermal stability at working temperatures, and the most satisfying sample is PCM1W, with a phase change enthalpy of 40.34 J/g and a phase change temperature of 21.49 °C. This study revealed that PCMs are resistant to wood-destroying fungi. After the 96 h water absorption test, the water absorption of the wood samples decreased by 28%, and the tangential swelling decreased by 75%. In addition, it has been proven on a laboratory scale that the PCM material used is highly resistant to biological attacks. However, large-scale pilot studies are still needed.

Tranexamic acid, as an adjunct to oxytocin prophylaxis, in the prevention of postpartum haemorrhage in women undergoing elective caesarean section: A single-centre double-blind randomised controlled trial

OBJECTIVE

To evaluate the effectiveness of tranexamic acid (TXA) in reducing blood loss during elective caesarean sections in women with and without risk factors for postpartum haemorrhage (PPH).

DESIGN

A double-blind, randomised placebo-controlled trial.

SETTING

An academic tertiary referral centre in Singapore.

POPULATION

Multiethnic women aged 21 years or older undergoing elective caesarean section.

METHODS

Randomisation to intravenous TXA or normal saline (placebo) 10 minutes before skin incision.

MAIN OUTCOME MEASURES

Calculated estimated blood loss (cEBL), derived from blood volume and haematocrit levels.

RESULTS

Between June 2020 and October 2021, 200 women were randomised to the placebo or TXA groups. Women who received prophylactic TXA had a significantly lower mean cEBL compared with those receiving placebo (adjusted mean difference -126.4 mL, 95% CI -243.7 to -9.1, p = 0.035). The effect was greatest in those at high risk for PPH, with a reduction in cEBL (mean difference -279.6 mL, 95% CI -454.8 to -104.3, p = 0.002) and a lower risk of cEBL ≥500 mL (risk ratio [RR] 0.54, 95% CI 0.36-0.83, p = 0.007) and cEBL ≥1000 mL (RR 0.44, 95% CI 0.20-0.98, p = 0.016). Subgroup analysis showed benefit for women with preoperative haemoglobin <10.5 g/dL (mean difference -281.9 mL, 95% CI -515.0 to -48.8, p = 0.019). There was no significant difference in need for additional medical or surgical interventions. There were no maternal or neonatal adverse outcomes.

CONCLUSION

Prophylactic TXA should be considered in women with risk factors for PPH, and those most likely to benefit are those with preoperative haemoglobin <10.5 g/dL.

Effects of NCO/OH Ratios on Bio-Based Polyurethane Film Properties Made from Acacia mangium Liquefied Wood

The compatibility between isocyanate and polyol plays an important role in determining a polyurethane product's performance. This study aims to evaluate the effect of varying the ratios between polymeric methylene diphenyl diisocyanate (pMDI) and Acacia mangium liquefied wood polyol on the polyurethane film properties. A. mangium wood sawdust was liquefied in polyethylene glycol/glycerol co-solvent with H₂SO₄ as a catalyst at 150 °C for 150 min. The A. mangium liquefied wood was mixed with pMDI with difference NCO/OH ratios to produce film through the casting method. The effects of the NCO/OH ratios on the molecular structure of the PU film were examined. The formation of urethane, which was located at 1730 cm^-1, was confirmed via FTIR spectroscopy. The TGA and DMA results indicated that high NCO/OH ratios increased the degradation temperature and glass transition from 275 °C to 286 °C and 50 °C to 84 °C, respectively. The prolonged heat appeared to boost the crosslinking density of the A. mangium polyurethane films, which finally resulted in a low sol fraction. From the 2D-COS analysis, the hydrogen-bonded carbonyl (1710 cm^-1) had the most significant intensity changes with the increasing NCO/OH ratios. The occurrence of the peak after 1730 cm^-1 revealed that there was substantial formation of urethane hydrogen bonding between the hard (PMDI) and soft (polyol) segments as the NCO/OH ratios increased, which gave higher rigidity to the film.

Effects of genomic estimated breeding value and dietary energy to protein ratio on growth performance, carcass trait, and lipogenic gene expression in Hanwoo steer

"Genome-based precision feeding" is a concept that involves the application of customised diets to different genetic groups of cattle. We investigated the effects of the genomic estimated breeding value (gEBV) and dietary energy to protein ratio (DEP) on growth performance, carcass traits, and lipogenic gene expression in Hanwoo (Korean cattle) steers. Forty-four Hanwoo steers (BW = 636 kg, age = 26.9 months) were genotyped using the Illumina Bovine 50 K BeadChip. The gEBV was calculated using genomic best linear unbiased prediction. Animals were separated into high gEBV of marbling score or low-gMS groups based on the upper and lower 50% groupings of the reference population, respectively. Animals were assigned to one of four groups in a 2 × 2 factorial arrangement: high gMS/high DEP (0.084 MJ/g), high gMS/low DEP (0.079 MJ/g), low gMS/high DEP, and low gMS/low DEP. Steers were fed concentrate with a high or low DEP for 31 weeks. The BW tended to be higher (0.05 < P < 0.1) in the high-gMS groups compared to the low-gMS groups at 0, 4, 8, 12, and 20 weeks. The average daily gain (ADG) tended to be lower (P = 0.08) in the high-gMS group than in the low-gMS group. Final BW and measured carcass weight (CW) were positively correlated with the gEBV of carcass weight (gCW). The DEP did not affect ADG. Neither the gMS nor the DEP affected the MS and beef quality grade. The intramuscular fat (IMF) content in the longissimus thoracis (LT) tended to be higher (P = 0.08) in the high-gMS groups than in the low-gMS groups. The mRNA levels of lipogenic acetyl-CoA carboxylase and fatty acid binding protein 4 genes in the LT were higher (P < 0.05) in the high-gMS group than in the low-gMS group. Overall, the IMF content tended to be affected by the gMS, and the genetic potential (i.e., gMS) was associated with the functional activity of lipogenic gene expression. The gCW was associated with the measured BW and CW. The results demonstrated that the gMS and the gCW may be used as early prediction indexes for meat quality and growth potential of beef cattle.