Dye-sensitization of self-assembled titania nanotubes prepared by galvanostatic anodization of Ti sputtered on conductive glass

Self-organized porous TiO(2) nanotubes (NTs) were prepared on conductive glass by galvanostatic anodizing of sputtered titanium in an NH(4)F /glycerol electrolyte. DC magnetron sputtering at an elevated substrate temperature (500 degrees C) was used to deposit 650 nm thick titanium films. After anodizing, NTs, 830 nm long, with an average external diameter of 92 nm, were grown; this gave a high conversion rate of oxide from titanium (1.9), with a 220 nm thick layer of titanium, which was not oxidized, located at the base of the tubes. The NTs revealed a mainly amorphous structure, which transformed mostly to anatase upon thermal treatment in air at 450 degrees C. The tubes were sensitized by the N719 complex and the resultant photoelectrodes were incorporated into liquid dye solar cells (DSCs) and further tested under back-side illumination. High values of V(oc) (714 mV) were obtained under 1 sun (AM 1.5), assigned to low dark current magnitude and large recombination resistance and electron lifetime. In addition, typical values of fill factors (of the order of 0.62) were attained, in agreement with the estimated ohmic resistance of the cells in combination with low electron transfer resistance at the platinum/electrolyte interface. The overall moderate power conversion efficiency (of the order of 0.3%) was mainly due to the low short-circuit photocurrents (J(sc) = 0.68 mA cm(-2)), which was confirmed further by the corresponding IPCE values (5.2% at 510 nm). The magnitude of J(sc) was attributed to absorbed light losses due to back-side illumination of the cells, the low dye loading (due to the limited thickness of anodic titania) and the high charge transfer resistance at the TiO(2)/conductive substrate due to the presence of barrier layer(s) underneath the tubes. These preliminary results encourage the DSC community to explore further the galvanostatic anodizing of titanium in order to produce highly efficient porous TiO(2) NTs directly on conductive glass. Current work is focusing on achieving complete anodizing of the metal substrate and full transparency for the photoelectrode in order to increase and optimize the resultant cell efficiencies.

The efficiency of nanotube formation on titanium anodized under voltage and current control in fluoride/glycerol electrolyte

The formation of nanotubes on titanium is compared for anodizing under controlled voltage and controlled current in a fluoride/glycerol electrolyte. Rutherford backscattering spectroscopy and nuclear reaction analysis are employed to determine the film compositions. Film morphologies are examined by electron microscopy. The findings reveal films of approximate composition TiO(2).0.15TiF(4) that probably also contain derivatives of glycerol. Controlled voltage conditions resulted in more uniform final nanotube dimensions, for a particular charge density, and the highest efficiency of film growth, with the charge of the titanium in the film representing ∼48% of the charge passed during anodizing. Under current control, the efficiency decreased from ∼40% to ∼23% with increase of the current density from 0.1 to 0.5 mA cm(-2). Further, the thickness of the barrier layer was sometimes enhanced under current control, possibly due to a non-uniform current distribution and consequently elevated local temperature.

Modelling study on the protective role of OH radical scavengers and DNA higher-order structures in induction of single- and double-strand break by gamma-radiation

PURPOSE

To quantify the protective effects of (non-histonic) OH-radical scavengers and DNA higher-order structures in induction of single- (ssbs) and double-strand breaks (dsbs) by gamma-rays.

MATERIALS AND METHODS

Spatial distributions of energy depositions by gamma-rays in liquid water were modelled with the track structure modules of the biophysical simulation code PARTRAC. Such distributions were superimposed on different DNA structure models (e.g. linear DNA, SV40 'minichromosomes' and compact chromatin), and direct energy depositions in the sugar-phosphate were considered as potential (direct) ssbs. The diffusion and interaction of the main chemical species produced in liquid water radiolysis were explicitly simulated, and reactions of *OH with the sugar-phosphate were considered as potential (indirect) ssbs. Two ssb on opposite DNA strands within 10 base pairs were considered as one dsb. Yields of ssb and dsb Gy(-1) Dalton(-1) in different DNA target structures were calculated as a function of the *OH mean lifetime, whose inverse value was taken as representative of the scavenging capacity of the DNA environment.

RESULTS AND CONCLUSIONS

A further validation of the models implemented in the PARTRAC code has been provided, thus allowing a better understanding of the mechanisms underlying DNA damage. More specifically, the protection due to *OH scavengers was separately quantified with respect to that due to histones and chromatin folding, which could be 'switched off' in the simulations. As expected, for a given value of the environment scavenging capacity, linear DNA was more susceptible to strand breakage than SV40 minichromosomes, which in turn showed higher damage yields with respect to cellular DNA due to the larger accessibility offered to *OH. Furthermore, by increasing the scavenging capacity, the break yields decreased in all structures and tended to coincide with direct damage yields. Very good agreement was found with available experimental data. Comparisons with data on 'nucleoid' DNA (i.e. unfolded and histone-depleted DNA) also suggested that the experimental procedures used to obtain such structures might lower the environment scavenging capacity owing to the loss of cellular scavengers.