Detachable microsphere scalpel tips for potential use in ophthalmic surgery with the erbium:YAG laser

Vitreoretinal surgery is performed using mechanical dissection that sometimes results in iatrogenic complications, including vitreous hemorrhage, retinal breaks, incomplete membrane delamination, retinal distortion, microscopic damage, etc. An ultraprecise laser probe would be an ideal tool for cutting away pathologic membranes; however, the depth of surgery should be precisely controlled to protect the sensitive underlying retina. The ultraprecise surgical microprobe formed by chains of dielectric spheres for use with the erbium:YAG laser source (λ=2940  nm), with extremely short optical penetration depth in tissue, was optimized. Numerical modeling demonstrated a potential advantage of five-sphere focusing chains of sapphire spheres with index n=1.71 for ablating the tissue with self-limited depth around 10 to 20 μm. Novel detachable microsphere scalpel tips formed by chains of 300 μm sapphire (or ruby) spheres were tested on ophthalmic tissues, ex vivo. Detachable scalpel tips could allow for reusability of expensive mid-infrared trunk fibers between procedures, and offer more surgical customization by interchanging various scalpel tip configurations. An innovative method for aiming beam integration into the microsphere scalpel to improve the illumination of the surgical site was also shown. Single Er:YAG pulses of 0.2 mJ and 75-μs duration produced ablation craters in cornea epithelium for one, three, and five sphere structures with the latter generating the smallest crater depth (10 μm) with the least amount of thermal damage depth (30 μm). Detachable microsphere laser scalpel tips may allow surgeons better precision and safety compared to mechanical scalpels when operating on delicate or sensitive areas like the retina.

Characterization of novel microsphere chain fiber optic tips for potential use in ophthalmic laser surgery

Ophthalmic surgery may benefit from use of more precise fiber delivery systems during laser surgery. Some current ophthalmic surgical techniques rely on tedious mechanical dissection of tissue layers. In this study, chains of sapphire microspheres integrated into a hollow waveguide distal tip are used for erbium:YAG laser ablation studies in contact mode with ophthalmic tissues, ex vivo. The laser's short optical penetration depth combined with the small spot diameters achieved with this fiber probe may provide more precise tissue removal. One-, three-, and five-microsphere chain structures were characterized, resulting in FWHM diameters of 67, 32, and 30 μm in air, respectively, with beam profiles comparable to simulations. Single Er:YAG pulses of 0.1 mJ and 75-μs duration produced ablation craters with average diameters of 44, 30, and 17 μm and depths of 26, 10, and 8 μm, for one-, three-, and five-sphere structures, respectively. Microsphere chains produced spatial filtering of the multimode Er:YAG laser beam and fiber, providing spot diameters not otherwise available with conventional fiber systems. Because of the extremely shallow treatment depth, compact focused beam, and contact mode operation, this probe may have potential for use in dissecting epiretinal membranes and other ophthalmic tissues without damaging adjacent retinal tissue.

Contact focusing multimodal microprobes for ultraprecise laser tissue surgery

Focusing of multimodal beams by chains of dielectric microspheres assembled directly inside the cores of hollow waveguides is studied by using numerical ray tracing. The device designs are optimized for laser surgery in contact mode with strongly absorbing tissue. By analyzing a broad range of parameters it is demonstrated that chains formed by three or five spheres with a refractive index of 1.65-1.75 provide a two-fold improvement in spatial resolution over single spheres at the cost of 0.2-0.4 attenuation in peak intensity of the central focused beam. Potential applications include ultra precise laser ablation or coagulation in the eye and brain, cellular surgery, and the coupling of light into photonic nanostructures.

Fabrication of ridge waveguides: a new solgel route

Passive ridge waveguides can be deposited on silicon by a solvent-assisted lithographic process incorporating simple mask technology and photosensitive solgel-derived glasses. Thick films (~4 mum) are dip coated in one step, and channel waveguides and power splitters are imprinted in them by UV light through appropriate masks. Unexposed regions of the glass are removed by soaking of the films in n-propanol. The remaining ridges are then treated at 200 degrees C and planarized with a solgel cladding layer. Circular mode profiles are observed from ridge guides covered with the cladding. The waveguides are characterized with scanning electron microscopy, atomic force microscopy, surface profilometry, ellipsometry, and fiber end coupling. Overall, the procedure is simple and reproducible and leads to waveguides with low loss, of the order of 0.13 dB/cm.