Automated detection of irradiated food with the comet assay

Food irradiation is the process of exposing food to ionising radiation in order to disinfect, sanitise, sterilise and preserve food or to provide insect disinfestation. Irradiated food should be adequately labelled according to international and national guidelines. In many countries, there are furthermore restrictions to the product-specific maximal dose that can be administered. Therefore, there is a need for methods that allow detection of irradiated food, as well as for methods that provide a reliable dose estimate. In recent years, the comet assay was proposed as a simple, rapid and inexpensive method to fulfil these goals, but further research is required to explore the full potential of this method. In this paper we describe the use of an automated image analysing system to measure DNA comets which allow the discrimination between irradiated and non-irradiated food as well as the set-up of standard dose-response curves, and hence a sufficiently accurate dose estimation.

Determination of the accuracy of implant reconstruction and dose delivery in brachytherapy in The Netherlands and Belgium

PURPOSE

To gain insight into the accuracy of brachytherapy treatments, the accuracy of implant reconstruction and dose delivery was investigated in 33 radiotherapy institutions in The Netherlands and Belgium.

MATERIALS AND METHODS

The accuracy of the implant reconstruction method was determined using a cubic phantom containing 25 spheres at well-known positions. Reconstruction measurements were obtained on 41 brachytherapy localizers, 33 of which were simulators. The reconstructed distances between the spheres were compared with the true distances. The accuracy of the dose delivery was determined for high dose rate (HDR), pulsed dose rate (PDR) and low dose rate (LDR) afterloading systems using a polymethyl methacrylate cylindrical phantom containing a NE 2571 ionization chamber in its centre. The institutions were asked to deliver a prescribed dose at the centre of the phantom. The measured dose was compared with the prescribed dose.

RESULTS

The average reconstruction accuracy was -0.07 mm (+/-0.4 mm, 1 SD) for 41 localizers. The average deviation of the measured dose from the prescribed dose was +0.9% (+/-1.3%, 1 SD) for 21 HDR afterloading systems, +1.0% (+/-2.3%, 1 SD) for 12 PDR afterloaders, and +1.8% (+/-2.5%, 1 SD) for 15 LDR afterloaders.

CONCLUSIONS

This comparison showed a good accuracy of brachytherapy implant reconstruction and dose delivery in The Netherlands and Belgium.

Dosimetry of beta-ray ophthalmic applicators: comparison of different measurement methods

An international intercomparison of the dosimetry of three beta particle emitting ophthalmic applicators was performed, which involved measurements with radiochromic film, thermoluminescence dosimeters (TLDs), alanine pellets, plastic scintillators, extrapolation ionization chambers, a small fixed-volume ionization chambers, a diode detector and a diamond detector. The sources studied were planar applicators of 90Sr-90Y and 106Ru-106Rh, and a concave applicator of 106Ru-106Rh. Comparisons were made of absolute dosimetry determined at 1 mm from the source surface in water or water-equivalent plastic, and relative dosimetry along and perpendicular to the source axes. The results of the intercomparison indicate that the various methods yield consistent absolute dosimetry results at the level of 10%-14% (one standard deviation) depending on the source. For relative dosimetry along the source axis at depths of 5 mm or less, the agreement was 3%-9% (one standard deviation) depending on the source and the depth. Crucial to the proper interpretation of the measurement results is an accurate knowledge of the detector geometry, i.e., sensitive volume and amount of insensitive covering material. From the results of these measurements, functions which describe the relative dose rate along and perpendicular to the source axes are suggested.

The effect of carbon fibre inserts on the build-up and attenuation of high energy photon beams

BACKGROUND AND PURPOSE

The use of new materials in radiotherapy requires an investigation of the effects of these materials on the relevant beam parameters. The high strength and low density of carbon fibre suggest an excellent material for table inserts with minimal attenuation, without changing the skin sparing effect in the build-up zone.

MATERIALS AND METHODS

In this paper three different carbon fibre plates and two conventionally table top materials are studied in Co-60, 6 MV and 23 MV photon beams.

RESULTS AND CONCLUSIONS

From depth dose measurements it is clear that the dose in the build-up zone is influenced in the qualities of the beams. The mutual differences for the three carbon plates are minimal. For Co-60 the depth of the maximum dose is decreased by carbon from 5 to 2 mm and the surface dose is increased from 18 to 76%. For 6 and 23 MV the surface dose is increased from 21 to 52% and 20 to 32%, respectively, as well as the dose in the build-up region. A transmission of 99% was measured for two carbon plates out of three in Co-60 and for one out of three in 6 MV.

One year of experience with alanine dosimetry in radiotherapy

Commercially available alanine dosimeters from different manufacturers were purchased for this study. The response of the detectors was evaluated with 60Co gamma radiation in the dose range 0.2-200 Gy, using a small EPR spectrometer dedicated to dosimetry. The batch sensitivity, inter-specimen scattering and background signal for the different selection of dosimeters were evaluated. The usefulness of the alanine dosimetry system for clinical routine is illustrated by in vivo measurements during 192Ir brachytherapy of cervix carcinoma.