Stabilizing Highly Active Ru Sites by Suppressing Lattice Oxygen Participation in Acidic Water Oxidation

In hydrogen production, the anodic oxygen evolution reaction (OER) limits the energy conversion efficiency and also impacts stability in proton-exchange membrane water electrolyzers. Widely used Ir-based catalysts suffer from insufficient activity, while more active Ru-based catalysts tend to dissolve under OER conditions. This has been associated with the participation of lattice oxygen (lattice oxygen oxidation mechanism (LOM)), which may lead to the collapse of the crystal structure and accelerate the leaching of active Ru species, leading to low operating stability. Here we develop Sr-Ru-Ir ternary oxide electrocatalysts that achieve high OER activity and stability in acidic electrolyte. The catalysts achieve an overpotential of 190 mV at 10 mA cm^-2 and the overpotential remains below 225 mV following 1,500 h of operation. X-ray absorption spectroscopy and ¹⁸O isotope-labeled online mass spectroscopy studies reveal that the participation of lattice oxygen during OER was suppressed by interactions in the Ru-O-Ir local structure, offering a picture of how stability was improved. The electronic structure of active Ru sites was modulated by Sr and Ir, optimizing the binding energetics of OER oxo-intermediates.

Hydration-Effect-Promoting Ni-Fe Oxyhydroxide Catalysts for Neutral Water Oxidation

Oxygen evolution reaction (OER) catalysts that function efficiently in pH-neutral electrolyte are of interest for biohybrid fuel and chemical production. The low concentration of reactant in neutral electrolyte mandates that OER catalysts provide both the water adsorption and dissociation steps. Here it is shown, using density functional theory simulations, that the addition of hydrated metal cations into a Ni-Fe framework contributes water adsorption functionality proximate to the active sites. Hydration-effect-promoting (HEP) metal cations such as Mg²⁺ and hydration-effect-limiting Ba²⁺ into Ni-Fe frameworks using a room-temperature sol-gel process are incorporated. The Ni-Fe-Mg catalysts exhibit an overpotential of 310 mV at 10 mA cm^-2 in pH-neutral electrolytes and thus outperform iridium oxide (IrO₂ ) electrocatalyst by a margin of 40 mV. The catalysts are stable over 900 h of continuous operation. Experimental studies and computational simulations reveal that HEP catalysts favor the molecular adsorption of water and its dissociation in pH-neutral electrolyte, indicating a strategy to enhance OER catalytic activity.

Chemical-to-Electricity Carbon: Water Device

The ability to release, as electrical energy, potential energy stored at the water:carbon interface is attractive, since water is abundant and available. However, many previous reports of such energy converters rely on either flowing water or specially designed ionic aqueous solutions. These requirements restrict practical application, particularly in environments with quiescent water. Here, a carbon-based chemical-to-electricity device that transfers the chemical energy to electrical form when coming into contact with quiescent deionized water is reported. The device is built using carbon nanotube yarns, oxygen content of which is modulated using oxygen plasma-treatment. When immersed in water, the device discharges electricity with a power density that exceeds 700 mW m^-2 , one order of magnitude higher than the best previously published result. X-ray absorption and density functional theory studies support a mechanism of operation that relies on the polarization of sp² hybridized carbon atoms. The devices are incorporated into a flexible fabric for powering personal electronic devices.

0D-2D Quantum Dot: Metal Dichalcogenide Nanocomposite Photocatalyst Achieves Efficient Hydrogen Generation

Hydrogen generation via photocatalysis-driven water splitting provides a convenient approach to turn solar energy into chemical fuel. The development of photocatalysis system that can effectively harvest visible light for hydrogen generation is an essential task in order to utilize this technology. Herein, a kind of cadmium free Zn-Ag-In-S (ZAIS) colloidal quantum dots (CQDs) that shows remarkably photocatalytic efficiency in the visible region is developed. More importantly, a nanocomposite based on the combination of 0D ZAIS CQDs and 2D MoS₂ nanosheet is developed. This can leverage the strong light harvesting capability of CQDs and catalytic performance of MoS₂ simultaneously. As a result, an excellent external quantum efficiency of 40.8% at 400 nm is achieved for CQD-based hydrogen generation catalyst. This work presents a new platform for the development of high-efficiency photocatalyst based on 0D-2D nanocomposite.

Photon management for augmented photosynthesis

Microalgae and cyanobacteria are some of nature's finest examples of solar energy conversion systems, effortlessly transforming inorganic carbon into complex molecules through photosynthesis. The efficiency of energy-dense hydrocarbon production by photosynthetic organisms is determined in part by the light collected by the microorganisms. Therefore, optical engineering has the potential to increase the productivity of algae cultivation systems used for industrial-scale biofuel synthesis. Herein, we explore and report emerging and promising material science and engineering innovations for augmenting microalgal photosynthesis.

Photosynthetic microalgae could provide an ecologically sustainable route to produce solar biofuels and high-value chemicals. Here, the authors review various optical management strategies used to manipulate the incident light in order to increase the efficiency of microalgae biofuel production.

Enhanced electrocatalytic CO2 reduction via field-induced reagent concentration

Electrochemical reduction of carbon dioxide (CO₂) to carbon monoxide (CO) is the first step in the synthesis of more complex carbon-based fuels and feedstocks using renewable electricity. Unfortunately, the reaction suffers from slow kinetics owing to the low local concentration of CO₂ surrounding typical CO₂ reduction reaction catalysts. Alkali metal cations are known to overcome this limitation through non-covalent interactions with adsorbed reagent species, but the effect is restricted by the solubility of relevant salts. Large applied electrode potentials can also enhance CO₂ adsorption, but this comes at the cost of increased hydrogen (H₂) evolution. Here we report that nanostructured electrodes produce, at low applied overpotentials, local high electric fields that concentrate electrolyte cations, which in turn leads to a high local concentration of CO₂ close to the active CO₂ reduction reaction surface. Simulations reveal tenfold higher electric fields associated with metallic nanometre-sized tips compared to quasi-planar electrode regions, and measurements using gold nanoneedles confirm a field-induced reagent concentration that enables the CO₂ reduction reaction to proceed with a geometric current density for CO of 22 milliamperes per square centimetre at -0.35 volts (overpotential of 0.24 volts). This performance surpasses by an order of magnitude the performance of the best gold nanorods, nanoparticles and oxide-derived noble metal catalysts. Similarly designed palladium nanoneedle electrocatalysts produce formate with a Faradaic efficiency of more than 90 per cent and an unprecedented geometric current density for formate of 10 milliamperes per square centimetre at -0.2 volts, demonstrating the wider applicability of the field-induced reagent concentration concept.

Homogeneously dispersed multimetal oxygen-evolving catalysts

Earth-abundant first-row (3d) transition metal-based catalysts have been developed for the oxygen-evolution reaction (OER); however, they operate at overpotentials substantially above thermodynamic requirements. Density functional theory suggested that non-3d high-valency metals such as tungsten can modulate 3d metal oxides, providing near-optimal adsorption energies for OER intermediates. We developed a room-temperature synthesis to produce gelled oxyhydroxides materials with an atomically homogeneous metal distribution. These gelled FeCoW oxyhydroxides exhibit the lowest overpotential (191 millivolts) reported at 10 milliamperes per square centimeter in alkaline electrolyte. The catalyst shows no evidence of degradation after more than 500 hours of operation. X-ray absorption and computational studies reveal a synergistic interplay between tungsten, iron, and cobalt in producing a favorable local coordination environment and electronic structure that enhance the energetics for OER.

Dexamethasone treatment of tumor necrosis factor-alpha challenged organ of Corti explants activates nuclear factor kappa B signaling that induces changes in gene expression that favor hair cell survival

The objective was to determine the role of nuclear factor kappa B (NFκB) in dexamethasone base (DXMb) protection of auditory hair cells from tumor necrosis factor-alpha (TNFα)-induced loss on gene expression and cell signaling levels. Organ of Corti (OC) explants from 3-day-old rats were cultured under one of the following conditions: (1) media only--no treatment; (2) media+TNFα; (3) media+TNFα+DXMb; (4) media+TNFα+DXMb+NFκB-Inhibitor (NFκB-I); or (5) media+TNFα+DXMb+NFκBI-Scrambled control (NFκBI-C). A total of 60 organ of Corti explants (OC) were stained with FITC-Phalloidin after 96 h in culture (conditions 1-5) for hair cell counts and imaging of surface characteristics. A total of 108 OC were used for gene expression studies (i.e. B-actin, Bax, Bcl-2, Bcl-xl, and TNFR1) after 0, 24, or 48 h in vitro (conditions 1-4). A total of 86 OC were cultured (conditions 1-3) for 48 h, 36 of which were used for phosphorylated NFκB (p-NFκB) ELISA studies and 50 for whole mount anti-p-NFκB immunostain experiments. TNFα+DXMb exposed cultures demonstrated significant upregulation in anti-apoptotic Bcl-2 and Bcl-xl genes and downregulation in pro-apoptotic Bax gene expression; DXMb treatment of TNFα explants also lowered the Bax/Bcl-2 ratio and inhibited TNFR1 upregulation. After inhibiting NFκB activity with NFκB-I, the gene expression profile following TNFα+DXMb treatment now mimics that of TNFα-challenged OC explants. The levels of p-NFκB and the degree of nuclear translocation are significantly greater in TNFα+DXMb exposed OC explants than observed in the TNFα and control groups in the middle+basal turns of OC explants. These findings were supported by the results of the hair cell counts and the imaging results obtained from the whole mount OC specimens. DXMb protects against TNFα-induced apoptosis of auditory hair cells in vitro via activation of NFκB signaling in hair cell nuclei, and regulation of the expression levels of anti- and pro-apoptotic genes and a pro-inflammatory gene.