Impact of propagation time on yeast physiology during bottle conditioning of beer on an industrial scale

Bottle conditioning occurs when yeast and a fermentable extract are added to beer prior to packaging. Aside from ethanol and carbon dioxide production, this process can minimize the production of off-flavors and increase the shelf-life of beer. The advantages of bottle conditioning rely on the yeast being able to quickly referment the beer and maintain viability during storage. In this study, a commercial ale yeast was propagated in wort on a large scale (30 hL) for 24 h or 72 h and seeded into pale ale beer for bottle conditioning. We found that yeast propagated until the post-diauxic shift (72 h) provided better longevity in the bottle and improved foam stability compared to the 24 h propagated yeast. At the time of seeding, yeast propagated for 72 h showed an upregulation of proteins involved in cellular respiration and general stress pathways that may indicate responses toward mitigating cellular stress levels.

Assessment of yeast physiology during industrial-scale brewing practices using the redox-sensitive dye resazurin

Beer refermentation in bottles is an industrial process utilized by breweries where yeast and fermentable extract are added to green beer. The beer is refermented for a minimum of 2 weeks before distribution, with the physiological state of the yeast a critical factor for successful refermentation. Ideally, fresh yeast that is propagated from a dedicated propagation plant should be used for refermentation in bottles. Here, we explored the applicability of the fluorescent and redox-sensitive dye, resazurin, to assess cellular metabolism in yeast and its ability to differentiate between growth stages. We applied this assay, with other markers of yeast physiology, to evaluate yeast quality during a full-scale industrial propagation. Resazurin allowed the discrimination between the different growth phases in yeast and afforded a more in-depth understanding of yeast metabolism during propagation. This assay can be used to optimize the yeast propagation process and cropping time to improve beer quality.

The development of microfluidic-based western blotting: Technical advances and future perspectives

Over the past two decades significant technical advancement in the field of western blotting has been made possible through the utilization of microfluidic technologies. In this review we provide a critical overview of these advancements, highlighting the advantages and disadvantages of each approach. Particular attention is paid to the development of now commercially available systems, including those for single cell analysis. This review also discusses more recent developments, including algorithms for automation and/or improved quantitation, the utilization of different materials/chemistries, use of projection electrophoresis, and the development of triBlots. Finally, the review includes commentary on future advances in the field based on current developments, and the potential of these systems for use as point-of-care devices in healthcare.

Styrene-based polymerised high internal phase emulsions using monomers in the internal phase as co-surfactants for improved liquid chromatography

Poly(styrene-co-divinylbenzene)-based monoliths were prepared from the polymerisation of water-in-monomer high internal phase emulsions, where the water-soluble monomers acrylamide (AAm) or poly(ethylene glycol) diacrylate (PEGDA) (M_w 258) were also included in the 90 vol% internal phase. Both AAm and PEGDA were found to act as co-surfactants, resulting in the obtainment of monoliths with greater homogeneity in some cases. As a result these materials demonstrated significantly improved chromatographic performance for the separation of a standard mixture of proteins using reversed-phase liquid chromatography, in comparison to monoliths prepared with no internal phase monomer. In particular, the columns grafted with PEGDA were capable of separating a more complex mixture consisting of seven components. The inclusion of monomers in the internal phase also allowed for the functionalisation of the monolith's surface where the degree of polymerisation that occurred in the internal phase, which was governed by the monomer content in the internal phase and initiation location, determined whether polymeric chains or a hydrogel were grafted to the surface. A monolith grafted with AAm was also found to be capable of retaining polar analytes as a result of the increase in surface hydrophilicity.

Poly(styrene-co-divinylbenzene)-based monoliths prepared from the polymerisation of water-in-monomer high internal phase emulsions, where water-soluble monomers acrylamide or poly(ethylene glycol) diacrylate (M_w 258) were included in internal phase.

Effect of ethoxylated sorbitan ester surfactants on the chromatographic efficiency of poly(ethylene glycol)-based monoliths

The effect of adding ethoxylated sorbitan ester surfactants (Tweens®) to poly(ethylene glycol) diacrylate-based monolithic recipes was investigated. Five different Tweens® have been evaluated to investigate the exact role of non-ionic surfactants in poly(ethylene glycol) diacrylate-based monolith preparations. These monoliths were characterized by scanning electron microscopy, infrared spectroscopy, and nitrogen physisorption analysis. Different morphological features, and surface areas were observed when different types of Tween® were included in the recipe; Tween® 20 and 85 showed small globules, while Tween® 40, 60 and 80 exhibited larger globular structures with different sizes and degrees of coalescence. The different Tween®-based monoliths were investigated for the chromatographic separation of mixtures consisting of hydroxybenzoic acids and alkylbenzenes. These columns were mechanically stable, except for Tween® 80. The highest methylene selectivity and the best overall performance were achieved by Tween® 60. The efficiency was increased by increasing the concentration of the Tween® 60 and the amount of poly(ethylene glycol) diacrylate M_n 700 in the recipes up to 30 wt%, each. Further increases in either Tween® 60 or poly(ethylene glycol) diacrylate M_n 700 led to formation of non-permeable columns. The optimized column was successfully used for separation of mixtures of nonsteroidal anti-inflammatory and sulfa drugs, with a maximum efficiency of 60,000 plates/m.

Non-ionic Surface Active Agents as Additives toward a Universal Porogen System for Porous Polymer Monoliths

The influence of the addition of various non-ionic surfactants to poly(ethylene glycol) diacrylate-based monolith formulations was studied. Eight non-ionic surfactants having different chemistries were chosen for this study. These surfactants were Brij L4, Span 80, IGEPAL CO-520, Tergitol 15S9, 2,4,7,9-tetramethyl-5-decyne-4,7-diol ethoxylate, Tween 40, Triton X-405, and Tetronic 701. The chemical structures of these surfactants have a variety of functional groups and cover a wide range of molecular weights (360-3600 g/mol), viscosities (60-1500 cP), and hydrophilic-lipophilic balances (1.0-17.6). The formed polymers were characterized by scanning electron microscopy, surface area measurement by the Brunauer-Emmet-Teller method, elemental analysis, and Fourier transform infrared. Four formulations, involving the use of surfactants, resulted in permeable materials when prepared in 150 μm ID silica capillaries. The chromatographic performance of the resulting columns in reversed-phase mode was evaluated and compared using a mixture of alkyl benzenes as test analytes. The highest efficiency and methylene selectivity were observed when Tween 40 was included in the formulation, using decane/decanol/dodecanol as coporogens. This porogenic mixture was successfully used for preparation of monolithic columns from a selection of methacrylate- and styrene-based monomers, including butylmethacrylate, hydroxyethymethacrylate, laurylmethacrylate, glycidyl methacrylate, bisphenol diacrylate, benzylmethacrylate, and N,N-dimethylacrylamide, as well as for divinylbenzene. These results show the applicability of this porogenic mixture for a variety of monolithic formulations, providing an approach for developing a universal porogen system.

Effect of shearing stress on the radial heterogeneity and chromatographic performance of styrene-based polymerised high internal phase emulsions prepared in capillary format

Poly(styrene-co-divinylbenzene) monoliths were prepared from the polymerisation of water-in-monomer high internal phase emulsions consisting of a 90 vol% internal phase and stabilised by the non-ionic surfactant Span 80®. The materials were prepared in capillary housings of various internal diameters ranging from 150 μm to 540 μm by simply passing the emulsion through the capillaries. When low shear (300 rpm) was used for emulsification, the droplet and resulting void size distributions were observed to shift towards lower values when the emulsions were forced through capillaries of internal diameter less than 540 μm and all columns exhibited significant radial heterogeneity. When high shear was employed (14 000 rpm) the resulting emulsions preserved their structure when forced through these capillaries and possessed narrower void size distributions with no obvious radial heterogeneity observed upon curing. This resulted in significantly improved chromatographic performance for the separation of a standard mixture of proteins when compared to the materials prepared under low shear.

The preparation of polymerised high internal phase emulsions with high shear in narrower capillary dimensions results in significant improvements in the chromatographic performance for the separation of proteins.

Preparation of inverse polymerized high internal phase emulsions using an amphiphilic macro-RAFT agent as sole stabilizer

Oil-in-water (‘inverse’) High Internal Phase Emulsions (HIPEs) have been prepared using an amphiphilic macro-RAFT agent with toluene as the internal dispersed phase (∼80 vol%) and an aqueous monomer solution as the continuous phase.