Combined spin filtering actions in hybrid magnetic junctions based on organic chains covalently attached to graphene

We present a bias-controlled spin-filtering mechanism in spin-valves including a hybrid organic chain/graphene interface. Wet growth conditions of oligomeric molecular chains would usually lead, during standard CMOS-compatible fabrication processes, to the quenching of spintronics properties of metallic spin sources due to oxidation. We demonstrate by X-ray photoelectron spectroscopy that the use of a protective graphene layer fully preserves the metallic character of the ferromagnetic surface and thus its capability to deliver spin polarized currents. We focus here on a small aromatic chain of controllable lengths, formed by nitrobenzene monomers and derived from the commercial 4-nitrobenzene diazonium tetrafluoroborate, covalently attached to the graphene passivated spin sources thanks to electroreduction. A unique bias dependent switch of the spin signal is then observed in complete spin valve devices, from minority to majority spin carriers filtering. First-principles calculations are used to highlight the key role played by the spin-dependent hybridization of electronic states present at the different interfaces. Our work is a first step towards the exploration of spin transport using different functional molecular chains. It opens the perspective of atomic tailoring of magnetic junction devices towards spin and quantum transport control, thanks to the flexibility of ambient electrochemical surface functionalization processes.

Giant spin signals in chemically functionalized multiwall carbon nanotubes

Transporting quantum information such as the spin information over micrometric or even millimetric distances is a strong requirement for the next-generation electronic circuits such as low-voltage spin-logic devices. This crucial step of transportation remains delicate in nontopologically protected systems because of the volatile nature of spin states. Here, a beneficial combination of different phenomena is used to approach this sought-after milestone for the beyond-Complementary Metal Oxide Semiconductor (CMOS) technology roadmap. First, a strongly spin-polarized charge current is injected using highly spin-polarized hybridized states emerging at the complex ferromagnetic metal/molecule interfaces. Second, the spin information is brought toward the conducting inner shells of a multiwall carbon nanotube used as a confined nanoguide benefiting from both weak spin-orbit and hyperfine interactions. The spin information is finally electrically converted because of a strong magnetoresistive effect. The experimental results are also supported by calculations qualitatively revealing exceptional spin transport properties of this system.

Charge injection and transport properties of large area organic junctions based on aryl thin films covalently attached to a multilayer graphene electrode

The quantum interaction between molecules and electrode materials at molecule/electrode interfaces is a major ingredient in the electron transport properties of organic junctions. Driven by the coupling strength between the two materials, it results mainly in the broadening and energy shift of the interacting molecular orbitals. Using new electrode materials, such as the recently developed semi-conducting two-dimensional nanomaterials, has become a significant advancement in the field of molecular/organic electronics that opens new possibilities for controlling the interfacial electronic properties and thus the charge injection properties. In this article, we report the use of atomically thin two-dimensional multilayer graphene films as the base electrode in organic junctions with a vertical architecture. The interfacial electronic structure dominated by the covalent bonding between bis-thienyl benzene diazonium-based molecules and the multilayer graphene electrode has been probed by ultraviolet photoelectron spectroscopy and the results are compared with those obtained on junctions with standard Au electrodes. Room temperature injection properties of such interfaces have also been explored by electron transport measurements. We find that, despite strong variations of the density of states, the Fermi energy and the injection barriers, both organic junctions with Au base electrodes and multilayer graphene base electrodes show similar electronic responses. We explain this observation by the strong orbital coupling occurring at the bottom electrode/bis-thienyl benzene molecule interface and by the pinning of the hybridized molecular orbitals.

Self-assembled monolayers based spintronics: from ferromagnetic surface functionalization to spin-dependent transport

Chemically functionalized surfaces are studied for a wide range of applications going from medicine to electronics. Whereas non-magnetic surfaces have been widely studied, functionalization of magnetic surfaces is much less common and has almost never been used for spintronics applications. In this article we present the functionalization of La2/3Sr1/3MnO3, a ferromagnetic oxide, with self-assembled monolayers for spintronics. La2/3Sr1/3MnO3 is the prototypical half-metallic manganite used in spintronics studies. First, we show that La2/3Sr1/3MnO3 can be functionalized by alkylphosphonic acid molecules. We then emphasize the use of these functionalized surfaces in spintronics devices such as magnetic tunnel junctions fabricated using a nano-indentation based lithography technique. The observed exponential increase of tunnel resistance as a function of alkyl chain length is a direct proof of the successful connection of molecules to ferromagnetic electrodes. For all alkyl chains studied we obtain stable and robust tunnel magnetoresistance, with effects ranging from a few tens to 10 000%. These results show that functionalized electrodes can be integrated in spintronics devices and open the door to a molecular engineering of spintronics.

Probing electron-phonon excitations in molecular junctions by quantum interference

Electron-phonon coupling is a fundamental inelastic interaction in condensed matter and in molecules. Here we probe phonon excitations using quantum interference in electron transport occurring in short chains of anthraquinone based molecular junctions. By studying the dependence of molecular junction’s conductance as a function of bias voltage and temperature, we show that inelastic scattering of electrons by phonons can be detected as features in conductance resulting from quenching of quantum interference. Our results are in agreement with density functional theory calculations and are well described by a generic two-site model in the framework of non-equilibrium Green’s functions formalism. The importance of the observed inelastic contribution to the current opens up new ways for exploring coherent electron transport through molecular devices.

Phthalocyanine based molecular spintronic devices

Spin-dependent hybridization and spin excitation induce multiple magnetoresistance effects in phthalocyanine based spintronic devices.

Unidirectional Spin-Dependent Molecule-Ferromagnet Hybridized States Anisotropy in Cobalt Phthalocyanine Based Magnetic Tunnel Junctions

Organic or molecular spintronics is a rising field of research at the frontier between condensed matter physics and chemistry. It aims to mix spin physics and the richness of chemistry towards designing new properties for spin electronics devices through engineering at the molecular scale. Beyond the expectation of a long spin lifetime, molecules can be also used to tailor the spin polarization of the injected current through the spin-dependent hybridization between molecules and ferromagnetic electrodes. In this Letter, we provide direct evidence of a hybrid interface spin polarization reversal due to the differing hybridization between phthalocyanine molecules and each cobalt electrode in Co/CoPc/Co magnetic tunnel junctions. Tunnel magnetoresistance and anisotropic tunnel magnetoresistance experiments show that interfacial hybridized electronic states have a unidirectional anisotropy that can be controlled by an electric field and that spin hybridization at the bottom and top interfaces differ, leading to an inverse tunnel magnetoresistance.

[Vitamin D deficiency rickets complicating Dorfman-Chanarin syndrome]

Vitamin D deficiency rickets remains a public health issue in many parts of the world. In France, this diagnosis has almost disappeared since 1992 with routine vitamin D supplementation for children. Therefore, it is more difficult for doctors to identify risk factors and early signs of this disease. In this article, we report a rickets diagnosis acquired by vitamin D deficiency in a child who presented with the onset of a genu valgum and difficulty walking at the age of 9½ years. This patient was a Comorian child followed up from his birth for Dorfman-Chanarin syndrome. Dorfman-Chanarin syndrome is a rare disease, with about 80 cases reported in the literature. It belongs to the group of neutral lipid storage diseases (NLSD) characterized especially on the skin by ichthyosis. This child presented risk factors for vitamin D deficiency (dark skin color, prolonged and exclusive breastfeeding, premature end of supplementation, and particularly severe ichthyosis) that should have alerted us to the risk of vitamin D deficiency and the need for supplementation. This case highlights the importance of vitamin D, especially if there are risk factors such as ichthyosis, and the need to remain watchful in monitoring all chronic diseases.

Comparative mutagenicity and genotoxicity of particles and aerosols emitted by the combustion of standard vs. rapeseed methyl ester supplemented bio-diesel fuels: impact of after treatment devices: oxidation catalyst and particulate filter

Diesel exhausts are partly responsible for the deleterious effects on human health associated with urban pollution, including cardiovascular diseases, asthma, COPD, and possibly lung cancer. Particulate fraction has been incriminated and thus largely investigated for its genotoxic properties, based on exposure conditions that are, however, not relevant for human risk assessment. In this paper, original and more realistic protocols were used to investigate the hazards induced by exhausts emitted by the combustion of standard (DF0) vs. bio-diesel fuels (DF7 and DF30) and to assess the impact of exhaust treatment devices (DOC and DPF). Mutagenicity and genotoxicity were evaluated for (1) resuspended particles ("off line" exposure that takes into account the bioavailability of adsorbed chemicals) and for (2) the whole aerosols (particles+gas phase components) under continuous flow exposure ("on line" exposure). Native particles displayed mutagenic properties associated with nitroaromatic profiles (YG1041), whereas PAHs did not seem to be involved. After DOC treatment, the mutagenicity of particles was fully abolished. In contrast, the level of particle deposition was low under continuous flow exposure, and the observed mutagenicity in TA98 and TA102 was thus attributable to the gas phase. A bactericidal effect was also observed in TA102 after DOC treatment, and a weak but significant mutagenicity persisted after DPF treatment for bio-diesel fuels. No formation of bulky DNA-adducts was observed on A549 cells exposed to diesel exhaust, even in very drastic conditions (organic extracts corresponding to 500 μg equivalent particule/mL, 48 h exposure). Taken together, these data indicate that the exhausts issued from the bio-diesel fuels supplemented with rapseed methyl ester (RME), and generated by current diesel engines equipped with after treatment devices are less mutagenic than older ones. The residual mutagenicity is linked to the gas phase and could be due to pro-oxydants, mainly for RME-supplemented fuels.

Fabrication and transfer of flexible few-layers MoS2 thin film transistors to any arbitrary substrate

Recently, transition metal dichalcogenides (TMDCs) have attracted interest thanks to their large field effective mobility (>100 cm(2)/V · s), sizable band gap (around 1-2 eV), and mechanical properties, which make them suitable for high performance and flexible electronics. In this paper, we present a process scheme enabling the fabrication and transfer of few-layers MoS2 thin film transistors from a silicon template to any arbitrary organic or inorganic and flexible or rigid substrate or support. The two-dimensional semiconductor is mechanically exfoliated from a bulk crystal on a silicon/polyvinyl alcohol (PVA)/polymethyl methacrylane (PMMA) stack optimized to ensure high contrast for the identification of subnanometer thick flakes. Thin film transistors (TFTs) with structured source/drain and gate electrodes are fabricated following a designed procedure including steps of UV lithography, wet etching, and atomic layer deposited (ALD) dielectric. Successively, after the dissolution of the PVA sacrificial layer in water, the PMMA film, with the devices on top, can be transferred to another substrate of choice. Here, we transferred the devices on a polyimide plastic foil and studied the performance when tensile strain is applied parallel to the TFT channel. We measured an electron field effective mobility of 19 cm(2)/(V s), an I(on)/I(off)ratio greater than 10(6), a gate leakage current as low as 0.3 pA/μm, and a subthreshold swing of about 250 mV/dec. The devices continue to work when bent to a radius of 5 mm and after 10 consecutive bending cycles. The proposed fabrication strategy can be extended to any kind of 2D materials and enable the realization of electronic circuits and optical devices easily transferrable to any other support.

Unveiling self-assembled monolayers' potential for molecular spintronics: spin transport at high voltage

Molecular magnetic tunnel junctions using self-assembled monolayers (SAMs) as tunnel barriers show stable and efficient spin transport properties. Large tunnel magnetoresistance with a flat bias voltage dependence of the magnetoresistance is observed in La(2/3) Sr(1/3) MnO(3) /dodecylphosphonic acid SAM/Co nanocontacts. This opens the door to spintronic tailoring though SAM engineering and could also lead to new venues for spin injection in organic devices.

Self-assembled monolayer-functionalized half-metallic manganite for molecular spintronics

(La,Sr)MnO(3) manganite (LSMO) has emerged as the standard ferromagnetic electrode in organic spintronic devices due to its highly spin-polarized character and air stability. Whereas organic semiconductors and polymers have been mainly envisaged to propagate spin information, self-assembled monolayers (SAMs) have been overlooked and should be considered as promising materials for molecular engineering of spintronic devices. Surprisingly, up to now the first key step of SAM grafting protocols over LSMO surface thin films is still missing. We report the grafting of dodecyl (C12P) and octadecyl (C18P) phosphonic acids over the LSMO half-metallic oxide. Alkylphosphonic acids form ordered self-assembled monolayers, with the phosphonic group coordinated to the surface and alkyl chains tilted from the surface vertical by 43° (C12P) and 27° (C18P). We have electrically characterized these SAMs in nanodevices and found that they act as tunnel barriers, opening the door toward the integration of alkylphosphonic acid//LSMO SAMs into future molecular/organic spintronic devices such as spin OLEDs.

[Long-term outcome of mitral valve repair of dystrophic mitral regurgitation]

Between January 1984 and December 1994, 130 patients underwent mitral valvuloplasty for pure dystrophic mitral regurgitation. There were 94 men and 36 women with a mean age of 61 +/- 9 years: 52 patients were in atrial fibrillation; 91% of patients were in NYHA Classes III or IV. At preoperative echocardiography, the regurgitation was assessed as Grade III or IV and classified using the Carpentier classification according to type I (dilatation of the annulus) or II (mitral valve prolapse); 95% of patients had isolated prolapse of the posterior leaflet, 3% had isolated prolapse of the anterior leaflet and 2% had prolapse of the two leaflets. After valvuloplasty, a prosthetic ring was implanted in 124 patients (95%). The early mortality was 3%; 5.3% of patients had early complications. All patients underwent control transthoracic echocardiography in the first postoperative week. They were reviewed with a second transthoracic echocardiography after a mean follow-up of 5 +/- 0.3 years and a cumulative follow-up of 657 years-patients. At the immediate postoperative echocardiography, 24 minimal residual regurgitations were observed; at long-term, 20 new mitral regurgitations developed, all mild without any clinical symptoms and 98% of patients were in the NYHA Classes I or II. At 10 years, the actuarial survival was 73 +/- 16%; absence of thromboembolic complications 95 +/- 3%, absence of reoperation 95 +/- 5%. This study confirms the efficacy of mitral valvuloplasty and the postoperative stability of repaired valvular lesions. These results suggest that the operative indications should be considered at an earlier stage.