The influence of anastomotic techniques on postoperative anastomotic complications: Results of the Oesophago-Gastric Anastomosis Audit

BACKGROUND

The optimal anastomotic techniques in esophagectomy to minimize rates of anastomotic leakage and conduit necrosis are not known. The aim of this study was to assess whether the anastomotic technique was associated with anastomotic failure after esophagectomy in the international Oesophago-Gastric Anastomosis Audit cohort.

METHODS

This prospective observational multicenter cohort study included patients undergoing esophagectomy for esophageal cancer over 9 months during 2018. The primary exposure was the anastomotic technique, classified as handsewn, linear stapled, or circular stapled. The primary outcome was anastomotic failure, namely a composite of anastomotic leakage and conduit necrosis, as defined by the Esophageal Complications Consensus Group. Multivariable logistic regression modeling was used to identify the association between anastomotic techniques and anastomotic failure, after adjustment for confounders.

RESULTS

Of the 2238 esophagectomies, the anastomosis was handsewn in 27.1%, linear stapled in 21.0%, and circular stapled in 51.9%. Anastomotic techniques differed significantly by the anastomosis sites (P < .001), with the majority of neck anastomoses being handsewn (69.9%), whereas most chest anastomoses were stapled (66.3% circular stapled and 19.3% linear stapled). Rates of anastomotic failure differed significantly among the anastomotic techniques (P < .001), from 19.3% in handsewn anastomoses, to 14.0% in linear stapled anastomoses, and 12.1% in circular stapled anastomoses. This effect remained significant after adjustment for confounding factors on multivariable analysis, with an odds ratio of 0.63 (95% CI, 0.46-0.86; P = .004) for circular stapled versus handsewn anastomosis. However, subgroup analysis by anastomosis site suggested that this effect was predominantly present in neck anastomoses, with anastomotic failure rates of 23.2% versus 14.6% versus 5.9% for handsewn versus linear stapled anastomoses versus circular stapled neck anastomoses, compared with 13.7% versus 13.8% versus 12.2% for chest anastomoses.

CONCLUSIONS

Handsewn anastomoses appear to be independently associated with higher rates of anastomotic failure compared with stapled anastomoses. However, this effect seems to be largely confined to neck anastomoses, with minimal differences between techniques observed for chest anastomoses. Further research into standardization of anastomotic approach and techniques may further improve outcomes.

Textbook outcome following oesophagectomy for cancer: international cohort study

Background

Textbook outcome has been proposed as a tool for the assessment of oncological surgical care. However, an international assessment in patients undergoing oesophagectomy for oesophageal cancer has not been reported. This study aimed to assess textbook outcome in an international setting.

Methods

Patients undergoing curative resection for oesophageal cancer were identified from the international Oesophagogastric Anastomosis Audit (OGAA) from April 2018 to December 2018. Textbook outcome was defined as the percentage of patients who underwent a complete tumour resection with at least 15 lymph nodes in the resected specimen and an uneventful postoperative course, without hospital readmission. A multivariable binary logistic regression model was used to identify factors independently associated with textbook outcome, and results are presented as odds ratio (OR) and 95 per cent confidence intervals (95 per cent c.i.).

Results

Of 2159 patients with oesophageal cancer, 39.7 per cent achieved a textbook outcome. The outcome parameter ‘no major postoperative complication’ had the greatest negative impact on a textbook outcome for patients with oesophageal cancer, compared to other textbook outcome parameters. Multivariable analysis identified male gender and increasing Charlson comorbidity index with a significantly lower likelihood of textbook outcome. Presence of 24-hour on-call rota for oesophageal surgeons (OR 2.05, 95 per cent c.i. 1.30 to 3.22; P = 0.002) and radiology (OR 1.54, 95 per cent c.i. 1.05 to 2.24; P = 0.027), total minimally invasive oesophagectomies (OR 1.63, 95 per cent c.i. 1.27 to 2.08; P &lt; 0.001), and chest anastomosis above azygous (OR 2.17, 95 per cent c.i. 1.58 to 2.98; P &lt; 0.001) were independently associated with a significantly increased likelihood of textbook outcome.

Conclusion

Textbook outcome is achieved in less than 40 per cent of patients having oesophagectomy for cancer. Improvements in centralization, hospital resources, access to minimal access surgery, and adoption of newer techniques for improving lymph node yield could improve textbook outcome.

Textbook outcome following oesophagectomy for cancer: international cohort study

BACKGROUND

Textbook outcome has been proposed as a tool for the assessment of oncological surgical care. However, an international assessment in patients undergoing oesophagectomy for oesophageal cancer has not been reported. This study aimed to assess textbook outcome in an international setting.

METHODS

Patients undergoing curative resection for oesophageal cancer were identified from the international Oesophagogastric Anastomosis Audit (OGAA) from April 2018 to December 2018. Textbook outcome was defined as the percentage of patients who underwent a complete tumour resection with at least 15 lymph nodes in the resected specimen and an uneventful postoperative course, without hospital readmission. A multivariable binary logistic regression model was used to identify factors independently associated with textbook outcome, and results are presented as odds ratio (OR) and 95 per cent confidence intervals (95 per cent c.i.).

RESULTS

Of 2159 patients with oesophageal cancer, 39.7 per cent achieved a textbook outcome. The outcome parameter 'no major postoperative complication' had the greatest negative impact on a textbook outcome for patients with oesophageal cancer, compared to other textbook outcome parameters. Multivariable analysis identified male gender and increasing Charlson comorbidity index with a significantly lower likelihood of textbook outcome. Presence of 24-hour on-call rota for oesophageal surgeons (OR 2.05, 95 per cent c.i. 1.30 to 3.22; P = 0.002) and radiology (OR 1.54, 95 per cent c.i. 1.05 to 2.24; P = 0.027), total minimally invasive oesophagectomies (OR 1.63, 95 per cent c.i. 1.27 to 2.08; P < 0.001), and chest anastomosis above azygous (OR 2.17, 95 per cent c.i. 1.58 to 2.98; P < 0.001) were independently associated with a significantly increased likelihood of textbook outcome.

CONCLUSION

Textbook outcome is achieved in less than 40 per cent of patients having oesophagectomy for cancer. Improvements in centralization, hospital resources, access to minimal access surgery, and adoption of newer techniques for improving lymph node yield could improve textbook outcome.

Influence of loading conditions in finite element analysis assessed by HR-pQCT on ex vivo fracture prediction

Many fractures occur in individuals with normal areal Bone Mineral Density (aBMD) measured by Dual X-ray Absorptiometry (DXA). High Resolution peripheral Quantitative Computed Tomography (HR-pQCT) allows for non-invasive evaluation of bone stiffness and strength through micro finite element (μFE) analysis at the tibia and radius. These μFE outcomes are strongly associated with fragility fractures but do not provide clear enhancement compared with DXA measurements. The objective of this study was to establish whether a change in loading conditions in standard μFE analysis assessed by HR-pQCT enhance the discrimination of low-trauma fractured radii (n = 11) from non-fractured radii (n = 16) obtained experimentally throughout a mechanical test reproducing a forward fall. Micro finite element models were created using HR-pQCT images, and linear analyses were performed using four different types of loading conditions (axial, non-axial with two orientations and torsion). No significant differences were found between the failure load assessed with the axial and non-axial models. The different loading conditions tested presented the same area under the receiver operating characteristic (ROC) curves of 0.79 when classifying radius fractures with an accuracy of 81.5%. In comparison, the area under the curve (AUC) is 0.77 from DXA-derived ultra-distal aBMD of the forearm with an accuracy of 85.2%. These results suggest that the restricted HR-pQCT scanned region seems not sensitive to loading conditions for the prediction of radius fracture risk based on ex vivo experiments (n = 27).

Postoperative outcomes in oesophagectomy with trainee involvement

BACKGROUND

The complexity of oesophageal surgery and the significant risk of morbidity necessitates that oesophagectomy is predominantly performed by a consultant surgeon, or a senior trainee under their supervision. The aim of this study was to determine the impact of trainee involvement in oesophagectomy on postoperative outcomes in an international multicentre setting.

METHODS

Data from the multicentre Oesophago-Gastric Anastomosis Study Group (OGAA) cohort study were analysed, which comprised prospectively collected data from patients undergoing oesophagectomy for oesophageal cancer between April 2018 and December 2018. Procedures were grouped by the level of trainee involvement, and univariable and multivariable analyses were performed to compare patient outcomes across groups.

RESULTS

Of 2232 oesophagectomies from 137 centres in 41 countries, trainees were involved in 29.1 per cent of them (n = 650), performing only the abdominal phase in 230, only the chest and/or neck phases in 130, and all phases in 315 procedures. For procedures with a chest anastomosis, those with trainee involvement had similar 90-day mortality, complication and reoperation rates to consultant-performed oesophagectomies (P = 0.451, P = 0.318, and P = 0.382, respectively), while anastomotic leak rates were significantly lower in the trainee groups (P = 0.030). Procedures with a neck anastomosis had equivalent complication, anastomotic leak, and reoperation rates (P = 0.150, P = 0.430, and P = 0.632, respectively) in trainee-involved versus consultant-performed oesophagectomies, with significantly lower 90-day mortality in the trainee groups (P = 0.005).

CONCLUSION

Trainee involvement was not found to be associated with significantly inferior postoperative outcomes for selected patients undergoing oesophagectomy. The results support continued supervised trainee involvement in oesophageal cancer surgery.

Mortality from esophagectomy for esophageal cancer across low, middle, and high-income countries: An international cohort study

BACKGROUND

No evidence currently exists characterising global outcomes following major cancer surgery, including esophageal cancer. Therefore, this study aimed to characterise impact of high income countries (HIC) versus low and middle income countries (LMIC) on the outcomes following esophagectomy for esophageal cancer.

METHOD

This international multi-center prospective study across 137 hospitals in 41 countries included patients who underwent an esophagectomy for esophageal cancer, with 90-day follow-up. The main explanatory variable was country income, defined according to the World Bank Data classification. The primary outcome was 90-day postoperative mortality, and secondary outcomes were composite leaks (anastomotic leak or conduit necrosis) and major complications (Clavien-Dindo Grade III - V). Multivariable generalized estimating equation models were used to produce adjusted odds ratios (ORs) and 95% confidence intervals (CI95%).

RESULTS

Between April 2018 to December 2018, 2247 patients were included. Patients from HIC were more significantly older, with higher ASA grade, and more advanced tumors. Patients from LMIC had almost three-fold increase in 90-day mortality, compared to HIC (9.4% vs 3.7%, p < 0.001). On adjusted analysis, LMIC were independently associated with higher 90-day mortality (OR: 2.31, CI95%: 1.17-4.55, p = 0.015). However, LMIC were not independently associated with higher rates of anastomotic leaks (OR: 1.06, CI95%: 0.57-1.99, p = 0.9) or major complications (OR: 0.85, CI95%: 0.54-1.32, p = 0.5), compared to HIC.

CONCLUSION

Resections in LMIC were independently associated with higher 90-day postoperative mortality, likely reflecting a failure to rescue of these patients following esophagectomy, despite similar composite anastomotic leaks and major complication rates to HIC. These findings warrant further research, to identify potential issues and solutions to improve global outcomes following esophagectomy for cancer.

Comparison of short-term outcomes from the International Oesophago-Gastric Anastomosis Audit (OGAA), the Esophagectomy Complications Consensus Group (ECCG), and the Dutch Upper Gastrointestinal Cancer Audit (DUCA)

BACKGROUND

The Esophagectomy Complications Consensus Group (ECCG) and the Dutch Upper Gastrointestinal Cancer Audit (DUCA) have set standards in reporting outcomes after oesophagectomy. Reporting outcomes from selected high-volume centres or centralized national cancer programmes may not, however, be reflective of the true global prevalence of complications. This study aimed to compare complication rates after oesophagectomy from these existing sources with those of an unselected international cohort from the Oesophago-Gastric Anastomosis Audit (OGAA).

METHODS

The OGAA was a prospective multicentre cohort study coordinated by the West Midlands Research Collaborative, and included patients undergoing oesophagectomy for oesophageal cancer between April and December 2018, with 90 days of follow-up.

RESULTS

The OGAA study included 2247 oesophagectomies across 137 hospitals in 41 countries. Comparisons with the ECCG and DUCA found differences in baseline demographics between the three cohorts, including age, ASA grade, and rates of chronic pulmonary disease. The OGAA had the lowest rates of neoadjuvant treatment (OGAA 75.1 per cent, ECCG 78.9 per cent, DUCA 93.5 per cent; P < 0.001). DUCA exhibited the highest rates of minimally invasive surgery (OGAA 57.2 per cent, ECCG 47.9 per cent, DUCA 85.8 per cent; P < 0.001). Overall complication rates were similar in the three cohorts (OGAA 63.6 per cent, ECCG 59.0 per cent, DUCA 62.2 per cent), with no statistically significant difference in Clavien-Dindo grades (P = 0.752). However, a significant difference in 30-day mortality was observed, with DUCA reporting the lowest rate (OGAA 3.2 per cent, ECCG 2.4 per cent, DUCA 1.7 per cent; P = 0.013).

CONCLUSION

Despite differences in rates of co-morbidities, oncological treatment strategies, and access to minimal-access surgery, overall complication rates were similar in the three cohorts.

Variabilities in µQCT-based FEA of a tumoral bone mice model

A finite element analysis based on Micro-Quantitative Computed Tomography (µQCT) is a method with high potential to improve fracture risk prediction. However, the segmentation process and model generation are generally not automatized in their entirety. Even with a rigorous protocol, the operator might add uncertainties during the creation of the model. The aim of this study was to evaluate a µQCT-based model of mice tumoral and sham tibias in terms of the variabilities induced by the operator and sensitivity to operator-dependent variables (such as model orientation or length). Two different operators generated finite element (FE) models from µCT images of 8 female Balb/c nude mice tibias aged 10 weeks old with bone tumors induced in the right tibia and with sham injection in the left. From these models, predicted failure load was determined for two different boundary conditions: fixed support and spherical joints. The difference between the predicted and experimental failure load of both operators was large (-122% to 93%). The difference in the predicted failure load between operators was less for the spherical joints boundary conditions (9.8%) than for the fixed support (58.3%), p < 0.001, whereas varying the orientation of bone tibia caused more variability for the fixed support boundary condition (44.7%) than for the spherical joints (9.1%), p < 0.002. Varying tibia length had no significant effect, regardless of boundary conditions (<4%). When using the same mesh and same orientation, the difference between operators is non-significant (<6%) for each model. This study showed that the operator influences the failure load assessed by a µQCT-based finite element model of the tumoral and sham mice tibias. The results suggest that automation is needed for better reproducibility.

Bone cortical thickness and porosity assessment using ultrasound guided waves: An ex vivo validation study

Several studies showed the ability of the cortex of long bones such as the radius and tibia to guide mechanical waves. Such experimental evidence has given rise to the emergence of a category of quantitative ultrasound techniques, referred to as the axial transmission, specifically developed to measure the propagation of ultrasound guided waves in the cortical shell along the axis of long bones. An ultrasound axial transmission technique, with an automated approach to quantify cortical thickness and porosity is described. The guided modes propagating in the cortex are recorded with a 1-MHz custom made linear transducer array. Measurement of the dispersion curves is achieved using a two-dimensional spatio-temporal Fourier transform combined with singular value decomposition. Automatic parameters identification is obtained through the solution of an inverse problem in which the dispersion curves are predicted with a two-dimensional transverse isotropic free plate model. Thirty-one radii and fifteen tibiae harvested from human cadavers underwent axial transmission measurements. Estimates of cortical thickness and porosity were obtained on 40 samples out of 46. The reproducibility, given by the root mean square error of the standard deviation of estimates, was 0.11 mm for thickness and 1.9% for porosity. To assess accuracy, site-matched micro-computed tomography images of the bone specimens imaged at 9 μm voxel size served as the gold standard. Agreement between micro-computed tomography and axial transmission for quantification of thickness and porosity at the radius and tibia ranged from R²=0.63 for porosity (root mean square error RMSE=1.8%) to 0.89 for thickness (RMSE=0.3 mm). Despite an overall good agreement for porosity, the method performs less well for porosities lower than 10%. The heterogeneity and general complexity of cortical bone structure, which are not fully accounted for by our model, are suspected to weaken the model approximation. This study presents the first validation study for assessing cortical thickness and porosity using the axial transmission technique. The automatic signal processing minimizes operator-dependent errors for parameters determination. Recovering the waveguide characteristics, that is to say cortical thickness and porosity, could provide reliable information about skeletal status and future fracture risk.

An ex vivo experiment to reproduce a forward fall leading to fractured and non-fractured radii

Forward falls represent a risk of injury for the elderly. The risk is increased in elderly persons with bone diseases, such as osteoporosis. However, half of the patients with fracture were not considered at risk based on bone density measurement (current clinical technique). We assume that loading conditions are of high importance and should be considered. Real loading conditions in a fall can reach a loading speed of 2m/s on average. The current study aimed to apply more realistic loading conditions that simulate a forward fall on the radius ex vivo. Thirty radii from elderly donors (79y.o.±12y.o., 15 males, 15 females) were loaded at 2m/s using a servo-hydraulic testing machine to mimic impact that corresponds to a fall. Among the 30 radii, 14 had a fracture after the impact, leading to two groups (fractured and non-fractured). Surfacic strain fields were measured using stereovision and allow for visualization of fracture patterns. The average maximum load was 2963±1274N. These experimental data will be useful for assessing the predictive capability of fracture risk prediction methods such as finite element models.

In Vivo Assessment of Elasticity of Child Rib Cortical Bone Using Quantitative Computed Tomography

Elasticity of the child rib cortical bone is poorly known due to the difficulties in obtaining specimens to perform conventional tests. It was shown on the femoral cortical bone that elasticity is strongly correlated with density for both children and adults through a unique relationship. Thus, it is assumed that the relationships between the elasticity and density of adult rib cortical bones could be expanded to include that of children. This study estimated in vivo the elasticity of the child rib cortical bone using quantitative computed tomography (QCT). Twenty-eight children (from 1 to 18 y.o.) were considered. Calibrated QCT images were prescribed for various thoracic pathologies. The Hounsfield units were converted to bone mineral density (BMD). A relationship between the BMD and the elasticity of the rib cortical bone was applied to estimate the elasticity of children's ribs in vivo. The estimated elasticity increases with growth (7.1 ± 2.5 GPa at 1 y.o. up to 11.6 ± 1.9 GPa at 18 y.o.). This data is in agreement with the few previous values obtained using direct measurements. This methodology paves the way for in vivo assessment of the elasticity of the child cortical bone based on calibrated QCT images.

Mechanical response of animal abdominal walls in vitro: evaluation of the influence of a hernia defect and a repair with a mesh implanted intraperitoneally

Better mechanical knowledge of the abdominal wall is requested to further develop and validate numerical models. The aim of this study was to characterize the passive behaviour of the abdominal wall under three configurations: intact, after creating a defect simulating an incisional hernia, and after a repair with a mesh implanted intraperitonally. For each configuration, controlled boundary conditions were applied (air pressure and then contact loading) to the abdominal wall. 3D local strain fields were determined by digital image correlation. Local strains measured on the internal and external surfaces of the intact abdominal wall showed different patterns. The air pressure and the force applied to the abdominal wall during contact loading were measured and used to determine stiffness. The presence of a defect resulted in a significant decrease of the global stiffness compared to the intact abdominal wall (about 25%). In addition, the presence of the mesh enabled to restore the stiffness to values that were not significantly different from those of the intact wall. These results suggest that intraperitoneal mesh seems to restore the global biomechanics of the abdomen.

Young’s modulus repeatability assessment using cycling compression loading on cancellous bone

For various applications, precision of the Young’s modulus of cancellous bone specimens is needed. However, measurement variability is rarely given. The aim of this study was to assess the Young’s modulus repeatability using a uniaxial cyclic compression protocol on embedded specimens of human cancellous bone. Twelve specimens from 12 human calcanei were considered. The specimens were first defatted and then 1 or 2 mm at the ends were embedded in an epoxy resin. The compression experiment consists in applying 20 compressive cycles between 0.2 per cent and 0.6 per cent strain with a 2 Hz loading frequency. The coefficient of variation of the current protocol was found to be 1.2 per cent. This protocol showed variability similar to the end-cap technique (considered as a reference). It can be applied on porous specimen (especially human bone) and requires minimal bone length to limit end-artifact variability. The current method could be applied in association with noninvasive measurements (such as ultrasound) with full compatibility. This possibility opens the way for bone damage follow-up based on Young’s modulus monitoring.

Apparent Young's modulus of vertebral cortico-cancellous bone specimens

Up to now, due to cortical thickness and imaging resolution, it is not possible to derive subject-specific mechanical properties on the 'vertebral shell' from imaging modalities applicable in vivo. As a first step, the goal of this study was to assess the apparent Young's modulus of vertebral cortico-cancellous bone specimens using an inverse method. A total of 22 cortico-cancellous specimens were harvested from 22 vertebral bodies. All specimens were tested in compression until failure. To compute the apparent Young's modulus of the specimen from the inverse method, the boundary conditions of the biomechanical experiments were faithfully reproduced in a finite element model (FEM), and an optimisation routine was used. The results showed a mean of the apparent Young's modulus of 374 ± 208 MPa, ranging from 87 to 791 MPa. By computing an apparent Young's modulus of a cortico-cancellous medium, this study gives mechanical data for an FEM of an entire vertebra including an external shell combining both bone tissues.

In vivo kinematics of the first carpometacarpal joint after trapezectomy

First carpometacarpal osteoarthitis is frequent and surgery may be necessary if medical treatment is not efficient. Trapeziometacarpal arthroplasty, trapeziometacarpal arthrodesis and trapezectomy may be proposed. These surgical solutions may modify the carpometacarpal kinematics of the thumb. However, no clinical tools are currently available to assess these modifications. The goal of our study is to assess the TM kinematics, with an optoelectronic system, in patients after trapezectomy. Ten women, average age 53 (range 45 to 67) underwent trapezectomy with ligamentoplasty for trapeziometacarpal osteoarthritis. An optoelectronic device (Polaris(®)) was used to analyse postoperative range-of-motion of the thumb. Splints were used in order to isolate the trapeziometacarpal joint and retroreflective markers were placed both on the splints and on the thumb. Mean flexion-extension, abduction-adduction, axial rotation and circumduction were calculated.

RESULTS

The mean range-of-motion of trapeziometacarpal joint was 50 degrees for flexion-extension, 47 degrees for abduction-adduction and 11 degrees for axial rotation. The mean angle between rotation axes was 90 degrees and the mean distance d between the axes was 3 millimeters. Comparisons between patients and healthy subjects showed no significant differences in flexion-extension, abduction-adduction and axial rotation. Circumduction in patients was reduced compared to healthy subjects. No significant differences were noted between the operated side and the contralateral side.

DISCUSSION AND CONCLUSION

Our study showed that this protocol can be used in the postoperative follow-up of patients after trapezectomy. We did not find any significant differences compared to the contralateral side. However, circumduction after trapezectomy was reduced compared to healthy subjects.

Monitoring trabecular bone microdamage using a dynamic acousto-elastic testing method

Dynamic acousto-elastic testing (DAET) is based on the coupling of a low-frequency (LF) acoustic wave and high-frequency ultrasound (US) pulses (probing wave). It was developed to measure US viscoelastic and dissipative non-linearity in trabecular bone. It is well known that this complex biphasic medium contains microdamage, even when tissues are healthy. The purpose of the present study was to assess the sensitivity of DAET to monitor microdamage in human calcanei. Three protocols were therefore performed to investigate the regional heterogeneity of the calcaneus, the correlation between DAET measurements and microdamage revealed by histology, and DAET sensitivity to mechanically induced fatigue microdamage. The non-linear elastic parameter beta was computed for all these protocols. The study demonstrated the presence of high viscoelastic and dissipative non-linearity only in the region of the calcaneus close to the anterior talocalcaneal articulation (region of high bone density). Protocols 1 and 2 also showed that most unsorted calcanei did not naturally exhibit high non-linearity, which is correlated with a low level of microcracks. Nevertheless, when microdamage was actually present, high levels of US non-linearity were always found, with characteristic non-linear signatures such as hysteresis and tension/compression asymmetry. Finally, protocol 3 demonstrated the high sensitivity of DAET measurement to fatigue-induced microdamage.

The pharmacokinetics and safety of porfimer after repeated administration 30-45 days apart to patients undergoing photodynamic therapy

BACKGROUND

Porfimer is an intravenous (i.v.) injectable photosensitizing agent used in the photodynamic treatment of tumours and of high-grade dysplasia in Barrett's oesophagus.

AIM

To assess the pharmacokinetics as well as the safety profiles of porfimer after a first and a second dose administered 30-45 days apart in patients undergoing photodynamic therapy.

METHODS

Nineteen patients (16 with cholangiocarcinoma) were enrolled. Porfimer sodium was administered by i.v. injection over 3-5 min. Blood samples were collected prior to starting i.v. drug injection and postdose at different time points after the first and second administrations.

RESULTS

Porfimer exposure values after the second administration were statistically higher than those observed after the first administration, suggesting a slight accumulation of porfimer following repeated administration. The apparent mean elimination half-life of porfimer increased from 410 h after the first administration to 725 h after the second administration. The safety profiles of porfimer after a first and a second administration were similar and did not raise additional concern. Eight patients experienced nine serious adverse events. Only photosensitivity was deemed study-drug related.

CONCLUSION

Porfimer appears to display a safe and tolerable profile when used in patients requiring a second photodynamic therapy within 45 days.

The effect of argon plasma coagulation ablation on esophageal motility and chemoreceptor sensitivity in Barrett's esophagus patients

Patients with Barrett's esophagus usually demonstrate impaired esophageal motility, which affects acid clearance, together with reduced chemo-receptor sensitivity and symptom severity. Ablative endoscopic techniques are now used to eliminate Barrett's cells. The hypothesis for this study was that ablation with argon plasma coagulation (APC) may affect esophageal sensitivity and motility in patients with Barrett's esophagus, and the aim of this study was to assess differences in these parameters before and after APC treatment. Twenty patients with Barrett's esophagus were investigated before and after APC therapy. After standard pull through manometry, water bolus aliquots were given to assess primary peristalsis and rapid water and air bolus injections to assess secondary peristalsis. Sensitivity studies were carried out using weak solutions of either hydrochloric acid or sodium hydroxide, together with saline washouts. Onset time for typical symptoms (t), sensory intensity rating (I), and a sensory score (SS) = (t) x (I)/100 was observed. There were no significant differences in the lower esophageal sphincter pressures (13.6 mm Hg versus 12.6 mm Hg, P= 0.8) and successful test swallows (3 mm Hg versus 5 mm Hg, P= 0.5) before and after treatment, but there was a trend for secondary peristalsis to improve (air bolus 0 versus 2, P= 0.05, water bolus 0 versus 1, P= 0.07). Sensitivity studies showed a smaller sensitivity intensity rating to both acid (61 versus 31, P= 0.02) and alkaline (91 versus 64, P= 0.03) after treatment. In conclusion, we have shown no substantive changes in esophageal motility after ablation of Barrett's esophagus cells, but have demonstrated reduced sensitivity to reflux type solutions.

3D reconstruction of the proximal femur with low-dose digital stereoradiography

OBJECTIVE

Accurate three-dimensional (3D) geometry of the proximal femur may be helpful for fracture risk evaluation, as well as for planning and assisting surgical procedures. The purpose of this study was to apply and validate a stereoradiographic 3D reconstruction method on the proximal femur from radiographic contours identified on bi-planar radiographs.

MATERIALS AND METHODS

Twenty-five excised non-pathologic proximal femurs were investigated using a low-dose digital radiographic device. Three-dimensional personalized models were reconstructed using the Non-Stereo Corresponding Contours (NSCC) algorithm. Three-dimensional CT-scan reconstructions were defined as geometric references for the comparison protocol, in order to assess the accuracy and reproducibility of the personalized 3D stereoradiographic reconstructions. In addition, the reliability of a set of 3D parameters obtained from stereoradiographic models was evaluated.

RESULTS

This study demonstrated the validity of the NSCC method when applied to the proximal femur, with good results for accuracy (mean error = 0.7 mm) and reproducibility (Wilcoxon test: p > 0.28). Moreover, a precision study for the set of 3D parameters yielded a coefficient of variation lower than 5%.

CONCLUSIONS

Once this approach has been validated in vivo, it should find multiple applications in therapeutic fields (e.g., for surgical planning, computer assisted surgery, etc.), as well as in diagnostic contexts (e.g., equilibrium studies or osteoporosis fracture risk assessment).

Comparative ultrasound evaluation of human trabecular bone graft properties after treatment with different sterilization procedures

New sterilization methods for human bone are likely to affect the mechanical properties of human cancellous grafts. These mechanical properties dictate the short- and mid-term results of the orthopedic procedure. The aim of this study was to compare the effects on bone mechanical properties, as assessed by ultrasound velocity, of different sterilization methods used under similar conditions: bleach and sublimation, humid heat, successive baths of physiological saline with osmotic detersion, and CO(2) in the supercritical phase. Alterations in mechanical properties were small with CO(2) (velocity change: -2%) and humid heat (-2.5%). Osmotic detersion had a significant but moderate effect (-4.7%). The -9% change with the protocol involving bleach suggested a greater than 30% decrease in load to failure, based on earlier studies. Gamma irradiation of defatted trabecular allografts, in a dose of 10 or 25 KGy, produced no significant changes in ultrasound velocity. Powerful protein denaturants used in sterilization protocols substantially alter the mechanical resistance of the grafts, which may jeopardize the orthopedic procedure.

Bone mineral density assessment using the EOS low-dose X-ray device: a feasibility study

To predict bone strength in the case of osteoporosis, it could be a real benefit to assess the three-dimensional (3D) geometry and the bone mineral density (BMD) with a single low-dose X-ray device, such as the EOS system (Biospace Med, Paris, France). EOS 3D reconstructions of the spine have already been validated. Thus, this study aims at evaluating the accuracy of this low-dose system as a densitometer first ex vivo. The European Spine Phantom (ESP) (number 129) was scanned ten times using both the EOS and a Hologic device (Hologic, Inc., Massachusetts, USA). Accuracy was given by the sum of the systematic error (difference between BMDs assessed and true values given by the phantom manufacturer) and the random error (coefficient of variation). EOS BMDs and Hologic BMDs of 41 ex-vivo vertebrae were calculated and compared. The reproducibility of the method evaluating the EOS BMD was assessed giving the coefficient of variation of three measurements of the 41 vertebrae. The accuracy of the EOS system is below 5.2 per cent, versus 7.2 per cent for the Hologic system in the same conditions. EOS BMDs are significantly higher than Hologic BMDs, but they are strongly correlated. The reproducibility of the method of assessment is equal to 0.95 per cent. The EOS system is accurate for ex-vivo BMD assessments, which is promising regarding the use of this new system to predict vertebral strength.