Diagnostic performance of MRI perfusion and spectroscopy for brainstem glioma grading

OBJECTIVE

This study investigated the roles of dynamic susceptibility contrast (DSC) perfusion and multivoxel magnetic resonance spectroscopy (MRS) in grading brainstem glioma (BSG).

PATIENTS AND METHODS

Our retrospective study comprised 12 patients, including 6 with pathology verified low-grade BSGs and 6 with high-grade BSGs. We examined differences in age, relative cerebral blood volume (rCBV), regional cerebral blood flow (rCBF), and the metabolite ratios of choline (Cho)/N-acetyl aspartate (NAA) and Cho/creatine (Cr) between these two groups using the Mann-Whitney U test and Chi-square test. Receiver operating characteristic (ROC) curve analysis was used to establish cutoff values and assess their usefulness in grading BSG.

RESULTS

The Cho/NAA metabolite ratio had the strongest preoperative predictive performance for identifying the correct histological grade among BSGs, with an area under the ROC curve (AUC) value of 0.944 (cutoff: 3.88, sensitivity [Se]: 83.3%; specificity [Sp]: 100%), followed by the Cho/Cr ratio (cutoff: 3.08; AUC: 0.917; Se: 83.3%; Sp: 100%), rCBF (cutoff: 3.56, AUC: 0.917; Se: 83.3%; Sp: 100%), rCBV (cutoff: 3.16, AUC: 0.889; Se: 100%; Sp: 66.7%), and age (cutoff: 9.5 years, AUC: 0.889; Se: 100%; Sp: 83.3%).

CONCLUSIONS

rCBF and rCBV values comparing solid tumors with the normal brain parenchyma and the metabolite ratios for Cho/NAA and Cho/Cre may serve as useful indices for establishing BSG grading and provide important information when determining treatment planning and prognosis in patients with BSG.

Superconductivity in an extreme strange metal

Some of the highest-transition-temperature superconductors across various materials classes exhibit linear-in-temperature 'strange metal' or 'Planckian' electrical resistivities in their normal state. It is thus believed by many that this behavior holds the key to unlock the secrets of high-temperature superconductivity. However, these materials typically display complex phase diagrams governed by various competing energy scales, making an unambiguous identification of the physics at play difficult. Here we use electrical resistivity measurements into the micro-Kelvin regime to discover superconductivity condensing out of an extreme strange metal state-with linear resistivity over 3.5 orders of magnitude in temperature. We propose that the Cooper pairing is mediated by the modes associated with a recently evidenced dynamical charge localization-delocalization transition, a mechanism that may well be pertinent also in other strange metal superconductors.

Intercellular bridges coordinate the transition from pluripotency to meiosis in mouse fetal oocytes

Meiosis is critical to generating oocytes and ensuring female fertility; however, the mechanisms regulating the switch from mitotic primordial germ cells to meiotic germ cells are poorly understood. Here, we implicate intercellular bridges (ICBs) in this state transition. We used three-dimensional in toto imaging to map meiotic initiation in the mouse fetal ovary and revealed a radial geometry of this transition that precedes the established anterior-posterior wave. Our studies reveal that appropriate timing of meiotic entry across the ovary and coordination of mitotic-meiotic transition within a cyst depend on the ICB component Tex14, which we show is required for functional cytoplasmic sharing. We find that Tex14 mutants more rapidly attenuate the pluripotency transcript Dppa3 upon meiotic initiation, and Dppa3 mutants undergo premature meiosis similar to Tex14 Together, these results lead to a model that ICBs coordinate and buffer the transition from pluripotency to meiosis through dilution of regulatory factors.

Effect of Magnetic Magnetite (Fe₃O₄) Nanoparticle Size on Arsenic (V) Removal from Water

Magnetic magnetite (Fe₃O₄) nanoparticles with average sizes of 5.11, 10.53, and 14.76 nm were synthesized by the chemical co-precipitation method. The surface area of Fe₃O₄ nanoparticles (average size of 5.11 nm) had the largest value of 167 m²/g. The adsorption capacity for removing arsenic (As(V)) from water at 3 ppm concentration was investigated by atomic absorption spectroscopy. Results showed that the As(V) adsorption capacity of Fe₃O₄ was dependent on particle size. The maximum absorption efficiency (H_max) reached 99.02%, the equilibrium time was 30 min; the maximum Langmuir isotherm adsorption capacity was 14.46 mg/g with Fe₃O₄ nanoparticle an average size of 5 nm. The results indicate that reducing the size of Fe₃O₄ nanoparticles is a promised way for As(V) ion removal from water and wastewater treatment.

Dynamical aspects of nanoparticle formation by wire explosion process

Copper nanoparticles (NPs) were produced by wire explosion process (WEP) and it was noted that the amount of energy (E) deposited on the wire and the ambient pressure play a major role on the size of particles formed. Dynamic diffusion and condensation processes of NPs formation by WEP were modelled. Calculations of critical size of embryo, activation energy and nucleation rate of the formation of NPs in WEP were made considering classical homogeneous nucleation theory. Decrease in critical size of nuclei and activation energy, increase in nucleation rate with high E (540 J) and low operating pressure (10 kPa) confirm the formation of small size NPs (26 nm). Different cooling rates due to unsymmetrical shape of the vapour cloud has been identified as the cause for generating mixed particle sizes. The qualitative analysis conducted in this work validates the obtained experimental results and can be used as a design tool for industrial apparatus to produce NPs in bulk.

Evaluation of the blend of organic acids and medium-chain fatty acids in matrix coating as antibiotic growth promoter alternative on growth performance, nutrient digestibility, blood profiles, excreta microflora, and carcass quality in broilers

This study was conducted to evaluate the effects of the blend of organic acids (OAs) and medium-chain fatty acids (MCFAs) in broiler chickens. A total of 816 1-d-old male Ross 308 broiler chickens (35 ± 0.44 g) were randomly allocated into 1 of the following 6 dietary treatments (17 broilers per pen with 8 pens per treatment): dietary treatments consisted of corn-soybean meal-based basal diet and the basal diet supplemented with 0.02, 0.03, 0.04, 0.05, and 0.06% blend of OAs and MCFAs. The study lasted 5 wk during which growth performance was determined. In the current study, the inclusion of 0.02, 0.03, 0.04, 0.05, and 0.06% blend of OAs and MCFAs in the basal diet linearly increased (P < 0.05) body weight gain and improved feed conversion ratio (P < 0.0001) on day 7 to 14, day 14 to 35, as well as overall. Increasing inclusion of the blend of OAs and MCFAs levels in the diets also linearly increased (P = 0.001) the digestibility of dry matter on day 35. Broilers fed with different levels of the blend of OAs and MCFAs showed a linear increment (P = 0.042) in Lactobacillus concentration and decrease (P = 0.002) in Escherichia coli concentration. With regard to relative organ weight, a trend of linear reduction (P = 0.052) in bursa of Fabricius weight of broilers fed the blend of OAs and MCFAs was observed. There was a significant linear improvement (P = 0.011) in the IgG concentration associated with the inclusion of the blend of OAs and MCFAs levels in the diets. In conclusion, the blend of OAs and MCFAs supplementation positively influenced growth performance, nutrient digestibility, and excreta microflora in broiler chickens.

Effect of dietary fermented oats in different nutrient-density diets on growth performance, nutrient digestibility and ileal microorganisms of weanling pigs

A total of 160 crossbred weanling pigs [(Landrace × Yorkshire) × Duroc, 28 days old] with an initial bodyweight of 8.01 ± 0.74 kg were used in a 42-day trial (Phase 1: Days 1–14, Phase 2: Days 14–42). The experiment was conducted to evaluate the effects of the inclusion of fermented oats (FO) to a corn and soybean meal-based diet on the performance of weanling pigs fed with high nutrient-density (HD) and low nutrient-density (LD) diets. Pigs were randomly distributed into one of four dietary treatments in a 2 × 2 factorial arrangement. Two levels of nutrient density [LD = 3323 (Phase 1: 1–14 days) and 3269 kcal/kg (Phase 2: 14–42 days); HD = 3446 (Phase 1: 1–14 days) and 3325 kcal/kg (Phase 2: 14–42 days), the differences in dietary energy were based on differences in the content of fish meal, animal fat, corn and FO [0%, 5% (Phase 1) or 2.5% (Phase 2)] were used according to the bodyweight and sex of pigs [8 replicate pens per treatment with 5 pigs in a pen (3 gilts and 2 barrows)]. During the overall trial period (Days 1–42), the average daily gain and gain:feed ratio of pigs fed HD and FO diets were significantly higher (P ≤ 0.05) than those of pigs fed with LD and non-fermented oats diets respectively. On Day 14, the apparent total tract digestibility of dry matter and nitrogen of the HD groups were significantly greater (P ≤ 0.05) than those of the LD groups. The apparent total tract digestibility of energy of the FO groups was significantly greater (P ≤ 0.05) than that of the non-fermented oats diet groups during the whole experimental period. Pigs fed with FO showed higher (P ≤ 0.05) ileal Lactobacillus and lower (P ≤ 0.05) Escherichia coli counts compared with those fed with the non-fermented oats diet. In conclusion, administration of FO to a LD diet demonstrated beneficial effects on the growth performance, nutrient digestibility and ileal microorganisms balance of weanling pigs.

Operation and performance of the ATLAS Tile Calorimeter in Run 1

The Tile Calorimeter is the hadron calorimeter covering the central region of the ATLAS experiment at the Large Hadron Collider. Approximately 10,000 photomultipliers collect light from scintillating tiles acting as the active material sandwiched between slabs of steel absorber. This paper gives an overview of the calorimeter's performance during the years 2008-2012 using cosmic-ray muon events and proton-proton collision data at centre-of-mass energies of 7 and 8 TeV with a total integrated luminosity of nearly 30 fb - 1 . The signal reconstruction methods, calibration systems as well as the detector operation status are presented. The energy and time calibration methods performed excellently, resulting in good stability of the calorimeter response under varying conditions during the LHC Run 1. Finally, the Tile Calorimeter response to isolated muons and hadrons as well as to jets from proton-proton collisions is presented. The results demonstrate excellent performance in accord with specifications mentioned in the Technical Design Report.

Effects of market type and time of purchase on oxidative status and descriptive off-odors and off-flavors of beef in Vietnam

The objective of the current study was to determine the effects of market type (super market - SM, indoor market - IM, open market - OM) and sampling time (at the opening - T0 and 4 h after the opening - T4) on antioxidant capacity, lipid oxidation, and descriptive sensory attributes of beef in Vietnam. Values of FC and TEAC were greater in OM beef than IM and SM (P < 0.001) and FC value was also greater at T4 than T0 (P = 0.038). The beef from SM had 7% greater TBARS than IM and OM (P = 0.003). Livery odor was less intense in raw beef from OM when compared to SM and IM (P ≤ 0.047). Sour odor in raw beef, and livery flavor in cooked beef was increased from T0 to T4 (P ≤ 0.035). Principal component analysis of descriptive sensory attributes indicated that FC and TEAC could predict partial livery flavor in cooked beef, but not off-odors in raw beef.

Fiducial, total and differential cross-section measurements of t-channel single top-quark production in pp collisions at 8 TeV using data collected by the ATLAS detector

Detailed measurements of t-channel single top-quark production are presented. They use 20.2 fb[Formula: see text] of data collected by the ATLAS experiment in proton-proton collisions at a centre-of-mass energy of 8 TeV at the LHC. Total, fiducial and differential cross-sections are measured for both top-quark and top-antiquark production. The fiducial cross-section is measured with a precision of 5.8% (top quark) and 7.8% (top antiquark), respectively. The total cross-sections are measured to be [Formula: see text] for top-quark production and [Formula: see text] for top-antiquark production, in agreement with the Standard Model prediction. In addition, the ratio of top-quark to top-antiquark production cross-sections is determined to be [Formula: see text]. The differential cross-sections as a function of the transverse momentum and rapidity of both the top quark and the top antiquark are measured at both the parton and particle levels. The transverse momentum and rapidity differential cross-sections of the accompanying jet from the t-channel scattering are measured at particle level. All measurements are compared to various Monte Carlo predictions as well as to fixed-order QCD calculations where available.

Topological cell clustering in the ATLAS calorimeters and its performance in LHC Run 1

The reconstruction of the signal from hadrons and jets emerging from the proton-proton collisions at the Large Hadron Collider (LHC) and entering the ATLAS calorimeters is based on a three-dimensional topological clustering of individual calorimeter cell signals. The cluster formation follows cell signal-significance patterns generated by electromagnetic and hadronic showers. In this, the clustering algorithm implicitly performs a topological noise suppression by removing cells with insignificant signals which are not in close proximity to cells with significant signals. The resulting topological cell clusters have shape and location information, which is exploited to apply a local energy calibration and corrections depending on the nature of the cluster. Topological cell clustering is established as a well-performing calorimeter signal definition for jet and missing transverse momentum reconstruction in ATLAS.

Measurements of the production cross section of a [Formula: see text] boson in association with jets in pp collisions at [Formula: see text] TeV with the ATLAS detector

Measurements of the production cross section of a [Formula: see text] boson in association with jets in proton-proton collisions at [Formula: see text] TeV are presented, using data corresponding to an integrated luminosity of 3.16 fb[Formula: see text] collected by the ATLAS experiment at the CERN Large Hadron Collider in 2015. Inclusive and differential cross sections are measured for events containing a [Formula: see text] boson decaying to electrons or muons and produced in association with up to seven jets with [Formula: see text] GeV and [Formula: see text]. Predictions from different Monte Carlo generators based on leading-order and next-to-leading-order matrix elements for up to two additional partons interfaced with parton shower and fixed-order predictions at next-to-leading order and next-to-next-to-leading order are compared with the measured cross sections. Good agreement within the uncertainties is observed for most of the modelled quantities, in particular with the generators which use next-to-leading-order matrix elements and the more recent next-to-next-to-leading-order fixed-order predictions.

Reconstruction of primary vertices at the ATLAS experiment in Run 1 proton-proton collisions at the LHC

This paper presents the method and performance of primary vertex reconstruction in proton-proton collision data recorded by the ATLAS experiment during Run 1 of the LHC. The studies presented focus on data taken during 2012 at a centre-of-mass energy of [Formula: see text] TeV. The performance has been measured as a function of the number of interactions per bunch crossing over a wide range, from one to seventy. The measurement of the position and size of the luminous region and its use as a constraint to improve the primary vertex resolution are discussed. A longitudinal vertex position resolution of about [Formula: see text] is achieved for events with high multiplicity of reconstructed tracks. The transverse position resolution is better than [Formula: see text] and is dominated by the precision on the size of the luminous region. An analytical model is proposed to describe the primary vertex reconstruction efficiency as a function of the number of interactions per bunch crossing and of the longitudinal size of the luminous region. Agreement between the data and the predictions of this model is better than 3% up to seventy interactions per bunch crossing.

Performance of the ATLAS trigger system in 2015

During 2015 the ATLAS experiment recorded [Formula: see text] of proton-proton collision data at a centre-of-mass energy of [Formula: see text]. The ATLAS trigger system is a crucial component of the experiment, responsible for selecting events of interest at a recording rate of approximately 1 kHz from up to 40 MHz of collisions. This paper presents a short overview of the changes to the trigger and data acquisition systems during the first long shutdown of the LHC and shows the performance of the trigger system and its components based on the 2015 proton-proton collision data.

Measurements of top-quark pair differential cross-sections in the [Formula: see text] channel in pp collisions at [Formula: see text] TeV using the ATLAS detector

This article presents measurements of [Formula: see text] differential cross-sections in a fiducial phase-space region, using an integrated luminosity of 3.2 fb[Formula: see text] of proton-proton data at a centre-of-mass energy of [Formula: see text] TeV recorded by the ATLAS experiment at the LHC in 2015. Differential cross-sections are measured as a function of the transverse momentum and absolute rapidity of the top quark, and of the transverse momentum, absolute rapidity and invariant mass of the [Formula: see text] system. The [Formula: see text] events are selected by requiring one electron and one muon of opposite electric charge, and at least two jets, one of which must be tagged as containing a b-hadron. The measured differential cross-sections are compared to predictions of next-to-leading order generators matched to parton showers and the measurements are found to be consistent with all models within the experimental uncertainties with the exception of the Powheg-Box [Formula: see text] Herwig++ predictions, which differ significantly from the data in both the transverse momentum of the top quark and the mass of the [Formula: see text] system.

Performance of algorithms that reconstruct missing transverse momentum in [Formula: see text]= 8 TeV proton-proton collisions in the ATLAS detector

The reconstruction and calibration algorithms used to calculate missing transverse momentum ([Formula: see text] ) with the ATLAS detector exploit energy deposits in the calorimeter and tracks reconstructed in the inner detector as well as the muon spectrometer. Various strategies are used to suppress effects arising from additional proton-proton interactions, called pileup, concurrent with the hard-scatter processes. Tracking information is used to distinguish contributions from the pileup interactions using their vertex separation along the beam axis. The performance of the [Formula: see text] reconstruction algorithms, especially with respect to the amount of pileup, is evaluated using data collected in proton-proton collisions at a centre-of-mass energy of 8 [Formula: see text] during 2012, and results are shown for a data sample corresponding to an integrated luminosity of [Formula: see text]. The simulation and modelling of [Formula: see text]  in events containing a Z boson decaying to two charged leptons (electrons or muons) or a W boson decaying to a charged lepton and a neutrino are compared to data. The acceptance for different event topologies, with and without high transverse momentum neutrinos, is shown for a range of threshold criteria for [Formula: see text] , and estimates of the systematic uncertainties in the [Formula: see text]  measurements are presented.

Measurement of jet activity produced in top-quark events with an electron, a muon and two b-tagged jets in the final state in pp collisions at [Formula: see text] TeV with the ATLAS detector

Measurements of jet activity in top-quark pair events produced in proton-proton collisions are presented, using 3.2 fb[Formula: see text] of pp collision data at a centre-of-mass energy of 13 TeV collected by the ATLAS experiment at the Large Hadron Collider. Events are chosen by requiring an opposite-charge [Formula: see text] pair and two b-tagged jets in the final state. The normalised differential cross-sections of top-quark pair production are presented as functions of additional-jet multiplicity and transverse momentum, [Formula: see text]. The fraction of signal events that do not contain additional jet activity in a given rapidity region, the gap fraction, is measured as a function of the [Formula: see text] threshold for additional jets, and is also presented for different invariant mass regions of the [Formula: see text] system. All measurements are corrected for detector effects and presented as particle-level distributions compared to predictions with different theoretical approaches for QCD radiation. While the kinematics of the jets from top-quark decays are described well, the generators show differing levels of agreement with the measurements of observables that depend on the production of additional jets.

Electron efficiency measurements with the ATLAS detector using 2012 LHC proton-proton collision data

This paper describes the algorithms for the reconstruction and identification of electrons in the central region of the ATLAS detector at the Large Hadron Collider (LHC). These algorithms were used for all ATLAS results with electrons in the final state that are based on the 2012 pp collision data produced by the LHC at [Formula: see text] = 8 [Formula: see text]. The efficiency of these algorithms, together with the charge misidentification rate, is measured in data and evaluated in simulated samples using electrons from [Formula: see text], [Formula: see text] and [Formula: see text] decays. For these efficiency measurements, the full recorded data set, corresponding to an integrated luminosity of 20.3 fb[Formula: see text], is used. Based on a new reconstruction algorithm used in 2012, the electron reconstruction efficiency is 97% for electrons with [Formula: see text] [Formula: see text] and 99% at [Formula: see text] [Formula: see text]. Combining this with the efficiency of additional selection criteria to reject electrons from background processes or misidentified hadrons, the efficiency to reconstruct and identify electrons at the ATLAS experiment varies from 65 to 95%, depending on the transverse momentum of the electron and background rejection.

Search for triboson [Formula: see text] production in pp collisions at [Formula: see text] [Formula: see text] with the ATLAS detector

This paper reports a search for triboson [Formula: see text] production in two decay channels ([Formula: see text] and [Formula: see text] with [Formula: see text]) in proton-proton collision data corresponding to an integrated luminosity of 20.3 [Formula: see text] at a centre-of-mass energy of 8 [Formula: see text] with the ATLAS detector at the Large Hadron Collider. Events with exactly three charged leptons, or two leptons with the same electric charge in association with two jets, are selected. The total number of events observed in data is consistent with the Standard Model (SM) predictions. The observed 95% confidence level upper limit on the SM [Formula: see text] production cross section is found to be 730 fb with an expected limit of 560 fb in the absence of SM [Formula: see text] production. Limits are also set on WWWW anomalous quartic gauge couplings.

Measurement of the prompt J/[Formula: see text] pair production cross-section in pp collisions at [Formula: see text] TeV with the ATLAS detector

The production of two prompt [Formula: see text] mesons, each with transverse momenta [Formula: see text] GeV and rapidity [Formula: see text], is studied using a sample of proton-proton collisions at [Formula: see text] TeV, corresponding to an integrated luminosity of 11.4 fb[Formula: see text] collected in 2012 with the ATLAS detector at the LHC. The differential cross-section, assuming unpolarised [Formula: see text] production, is measured as a function of the transverse momentum of the lower-[Formula: see text] [Formula: see text] meson, di-[Formula: see text] [Formula: see text] and mass, the difference in rapidity between the two [Formula: see text] mesons, and the azimuthal angle between the two [Formula: see text] mesons. The fraction of prompt pair events due to double parton scattering is determined by studying kinematic correlations between the two [Formula: see text] mesons. The total and double parton scattering cross-sections are compared with predictions. The effective cross-section of double parton scattering is measured to be [Formula: see text] mb.

Search for lepton-flavour-violating decays of the Higgs and Z bosons with the ATLAS detector

Direct searches for lepton flavour violation in decays of the Higgs and Z bosons with the ATLAS detector at the LHC are presented. The following three decays are considered: [Formula: see text], [Formula: see text], and [Formula: see text]. The searches are based on the data sample of proton-proton collisions collected by the ATLAS detector corresponding to an integrated luminosity of 20.3 [Formula: see text] at a centre-of-mass energy of [Formula: see text] TeV. No significant excess is observed, and upper limits on the lepton-flavour-violating branching ratios are set at the 95[Formula: see text] confidence level: Br[Formula: see text], Br[Formula: see text], and Br[Formula: see text].

Measurement of the [Formula: see text] and [Formula: see text] production cross sections in multilepton final states using 3.2 fb[Formula: see text] of [Formula: see text] collisions at [Formula: see text] = 13 TeV with the ATLAS detector

A measurement of the [Formula: see text] and [Formula: see text] production cross sections in final states with either two same-charge muons, or three or four leptons (electrons or muons) is presented. The analysis uses a data sample of proton-proton collisions at [Formula: see text] TeV recorded with the ATLAS detector at the Large Hadron Collider in 2015, corresponding to a total integrated luminosity of 3.2 fb[Formula: see text]. The inclusive cross sections are extracted using likelihood fits to signal and control regions, resulting in [Formula: see text] pb and [Formula: see text] pb, in agreement with the Standard Model predictions.

A measurement of the calorimeter response to single hadrons and determination of the jet energy scale uncertainty using LHC Run-1 pp-collision data with the ATLAS detector

A measurement of the calorimeter response to isolated charged hadrons in the ATLAS detector at the LHC is presented. This measurement is performed with 3.2 nb[Formula: see text] of proton-proton collision data at [Formula: see text] [Formula: see text] from 2010 and 0.1 nb[Formula: see text] of data at [Formula: see text] [Formula: see text] from 2012. A number of aspects of the calorimeter response to isolated hadrons are explored. After accounting for energy deposited by neutral particles, there is a 5% discrepancy in the modelling, using various sets of Geant4 hadronic physics models, of the calorimeter response to isolated charged hadrons in the central calorimeter region. The description of the response to anti-protons at low momenta is found to be improved with respect to previous analyses. The electromagnetic and hadronic calorimeters are also examined separately, and the detector simulation is found to describe the response in the hadronic calorimeter well. The jet energy scale uncertainty and correlations in scale between jets of different momenta and pseudorapidity are derived based on these studies. The uncertainty is 2-5% for jets with transverse momenta above 2 [Formula: see text], where this method provides the jet energy scale uncertainty for ATLAS.

Search for triboson [Formula: see text] production in pp collisions at [Formula: see text] [Formula: see text] with the ATLAS detector

This paper reports a search for triboson [Formula: see text] production in two decay channels ([Formula: see text] and [Formula: see text] with [Formula: see text]) in proton-proton collision data corresponding to an integrated luminosity of 20.3 [Formula: see text] at a centre-of-mass energy of 8 [Formula: see text] with the ATLAS detector at the Large Hadron Collider. Events with exactly three charged leptons, or two leptons with the same electric charge in association with two jets, are selected. The total number of events observed in data is consistent with the Standard Model (SM) predictions. The observed 95% confidence level upper limit on the SM [Formula: see text] production cross section is found to be 730 fb with an expected limit of 560 fb in the absence of SM [Formula: see text] production. Limits are also set on WWWW anomalous quartic gauge couplings.

Search for squarks and gluinos in events with hadronically decaying tau leptons, jets and missing transverse momentum in proton-proton collisions at [Formula: see text] TeV recorded with the ATLAS detector

A search for supersymmetry in events with large missing transverse momentum, jets, and at least one hadronically decaying tau lepton has been performed using 3.2 fb[Formula: see text] of proton-proton collision data at [Formula: see text] recorded by the ATLAS detector at the Large Hadron Collider in 2015. Two exclusive final states are considered, with either exactly one or at least two tau leptons. No excess over the Standard Model prediction is observed in the data. Results are interpreted in the context of gauge-mediated supersymmetry breaking and a simplified model of gluino pair production with tau-rich cascade decays, substantially improving on previous limits. In the GMSB model considered, supersymmetry-breaking scale ([Formula: see text]) values below [Formula: see text] are excluded at the 95% confidence level, corresponding to gluino masses below [Formula: see text]. For large values of [Formula: see text], values of [Formula: see text] up to [Formula: see text] and gluino masses up to [Formula: see text] are excluded. In the simplified model, gluino masses are excluded up to [Formula: see text] for neutralino masses around [Formula: see text]. Neutralino masses below [Formula: see text] are excluded for all gluino masses between 800 and [Formula: see text], while the strongest exclusion of [Formula: see text] is achieved for gluino masses around [Formula: see text].

Measurement of the [Formula: see text] dijet cross section in pp collisions at [Formula: see text] TeV with the ATLAS detector

The dijet production cross section for jets containing a b-hadron (b-jets) has been measured in proton-proton collisions with a centre-of-mass energy of [Formula: see text] TeV, using the ATLAS detector at the LHC. The data used correspond to an integrated luminosity of [Formula: see text]. The cross section is measured for events with two identified b-jets with a transverse momentum [Formula: see text] GeV and a minimum separation in the [Formula: see text]-[Formula: see text] plane of [Formula: see text]. At least one of the jets in the event is required to have [Formula: see text] GeV. The cross section is measured differentially as a function of dijet invariant mass, dijet transverse momentum, boost of the dijet system, and the rapidity difference, azimuthal angle and angular distance between the b-jets. The results are compared to different predictions of leading order and next-to-leading order perturbative quantum chromodynamics matrix elements supplemented with models for parton-showers and hadronization.

Measurement of the photon identification efficiencies with the ATLAS detector using LHC Run-1 data

The algorithms used by the ATLAS Collaboration to reconstruct and identify prompt photons are described. Measurements of the photon identification efficiencies are reported, using 4.9 fb[Formula: see text] of pp collision data collected at the LHC at [Formula: see text] [Formula: see text] and 20.3 fb[Formula: see text] at [Formula: see text] [Formula: see text]. The efficiencies are measured separately for converted and unconverted photons, in four different pseudorapidity regions, for transverse momenta between 10 [Formula: see text] and 1.5 [Formula: see text]. The results from the combination of three data-driven techniques are compared to the predictions from a simulation of the detector response, after correcting the electromagnetic shower momenta in the simulation for the average differences observed with respect to data. Data-to-simulation efficiency ratios used as correction factors in physics measurements are determined to account for the small residual efficiency differences. These factors are measured with uncertainties between 0.5% and 10% in 7 [Formula: see text] data and between 0.5% and 5.6% in 8 [Formula: see text] data, depending on the photon transverse momentum and pseudorapidity.

Test of CP invariance in vector-boson fusion production of the Higgs boson using the Optimal Observable method in the ditau decay channel with the ATLAS detector

A test of CP invariance in Higgs boson production via vector-boson fusion using the method of the Optimal Observable is presented. The analysis exploits the decay mode of the Higgs boson into a pair of [Formula: see text] leptons and is based on 20.3 [Formula: see text] of proton-proton collision data at [Formula: see text] = 8 [Formula: see text] collected by the ATLAS experiment at the LHC. Contributions from CP-violating interactions between the Higgs boson and electroweak gauge bosons are described in an effective field theory framework, in which the strength of CP violation is governed by a single parameter [Formula: see text]. The mean values and distributions of CP-odd observables agree with the expectation in the Standard Model and show no sign of CP violation. The CP-mixing parameter [Formula: see text] is constrained to the interval [Formula: see text] at 68% confidence level, consistent with the Standard Model expectation of [Formula: see text].

Search for the Higgs boson produced in association with a W boson and decaying to four b-quarks via two spin-zero particles in pp collisions at 13 TeV with the ATLAS detector

This paper presents a dedicated search for exotic decays of the Higgs boson to a pair of new spin-zero particles, [Formula: see text], where the particle a decays to b-quarks and has a mass in the range of 20-60 GeV. The search is performed in events where the Higgs boson is produced in association with a [Formula: see text] boson, giving rise to a signature of a lepton (electron or muon), missing transverse momentum, and multiple jets from b-quark decays. The analysis is based on the full dataset of pp collisions at [Formula: see text] recorded in 2015 by the ATLAS detector at the CERN Large Hadron Collider, corresponding to an integrated luminosity of 3.2 [Formula: see text]. No significant excess of events above the Standard Model prediction is observed, and a [Formula: see text] confidence-level upper limit is derived for the product of the production cross section for [Formula: see text] times the branching ratio for the decay [Formula: see text]. The upper limit ranges from 6.2 pb for an a-boson mass [Formula: see text] to 1.5 pb for [Formula: see text].

Measurement of the Inelastic Proton-Proton Cross Section at sqrt[s]=13 TeV with the ATLAS Detector at the LHC

This Letter presents a measurement of the inelastic proton-proton cross section using 60  μb^{-1} of pp collisions at a center-of-mass energy sqrt[s] of 13 TeV with the ATLAS detector at the LHC. Inelastic interactions are selected using rings of plastic scintillators in the forward region (2.07<|η|<3.86) of the detector. A cross section of 68.1±1.4  mb is measured in the fiducial region ξ=M_{X}^{2}/s>10^{-6}, where M_{X} is the larger invariant mass of the two hadronic systems separated by the largest rapidity gap in the event. In this ξ range the scintillators are highly efficient. For diffractive events this corresponds to cases where at least one proton dissociates to a system with M_{X}>13  GeV. The measured cross section is compared with a range of theoretical predictions. When extrapolated to the full phase space, a cross section of 78.1±2.9  mb is measured, consistent with the inelastic cross section increasing with center-of-mass energy.

Search for minimal supersymmetric standard model Higgs Bosons H / A and for a [Formula: see text] boson in the [Formula: see text] final state produced in pp collisions at [Formula: see text] TeV with the ATLAS detector

A search for neutral Higgs bosons of the minimal supersymmetric standard model (MSSM) and for a heavneutral [Formula: see text] boson is performed using a data sample corresponding to an integrated luminosity of 3.2 fb[Formula: see text] from proton-proton collisions at [Formula: see text]  [Formula: see text] recorded by the ATLAS detector at the LHC. The heavy resonance is assumed to decay to a [Formula: see text] pair with at least one [Formula: see text] lepton decaying to final states with hadrons and a neutrino. The search is performed in the mass range of 0.2-1.2  [Formula: see text] for the MSSM neutral Higgs bosons and 0.5-2.5  [Formula: see text] for the heavy neutral [Formula: see text] boson. The data are in good agreement with the background predicted by the Standard Model. The results are interpreted in MSSM and [Formula: see text] benchmark scenarios. The most stringent constraints on the MSSM [Formula: see text]-[Formula: see text] space exclude at 95 % confidence level (CL) [Formula: see text] for [Formula: see text] [Formula: see text] in the [Formula: see text] MSSM scenario. For the Sequential Standard Model, a [Formula: see text] mass up to 1.90  [Formula: see text] is excluded at 95 % CL and masses up to 1.82-2.17  [Formula: see text] are excluded for a [Formula: see text] of the strong flavour model.

Performance of pile-up mitigation techniques for jets in [Formula: see text] collisions at [Formula: see text] TeV using the ATLAS detector

The large rate of multiple simultaneous proton-proton interactions, or pile-up, generated by the Large Hadron Collider in Run 1 required the development of many new techniques to mitigate the adverse effects of these conditions. This paper describes the methods employed in the ATLAS experiment to correct for the impact of pile-up on jet energy and jet shapes, and for the presence of spurious additional jets, with a primary focus on the large 20.3 [Formula: see text] data sample collected at a centre-of-mass energy of [Formula: see text]. The energy correction techniques that incorporate sophisticated estimates of the average pile-up energy density and tracking information are presented. Jet-to-vertex association techniques are discussed and projections of performance for the future are considered. Lastly, the extension of these techniques to mitigate the effect of pile-up on jet shapes using subtraction and grooming procedures is presented.

Search for gluinos in events with an isolated lepton, jets and missing transverse momentum at [Formula: see text] = 13 Te V with the ATLAS detector

The results of a search for gluinos in final states with an isolated electron or muon, multiple jets and large missing transverse momentum using proton-proton collision data at a centre-of-mass energy of [Formula: see text] are presented. The dataset used was recorded in 2015 by the ATLAS experiment at the Large Hadron Collider and corresponds to an integrated luminosity of 3.2 fb[Formula: see text]. Six signal selections are defined that best exploit the signal characteristics. The data agree with the Standard Model background expectation in all six signal selections, and the largest deviation is a 2.1 standard deviation excess. The results are interpreted in a simplified model where pair-produced gluinos decay via the lightest chargino to the lightest neutralino. In this model, gluinos are excluded up to masses of approximately 1.6 Te V depending on the mass spectrum of the simplified model, thus surpassing the limits of previous searches.

Search for bottom squark pair production in proton-proton collisions at [Formula: see text] TeV with the ATLAS detector

The result of a search for pair production of the supersymmetric partner of the Standard Model bottom quark ([Formula: see text]) is reported. The search uses 3.2 fb[Formula: see text]  of pp collisions at [Formula: see text] TeV collected by the ATLAS experiment at the Large Hadron Collider in 2015. Bottom squarks are searched for in events containing large missing transverse momentum and exactly two jets identified as originating from b-quarks. No excess above the expected Standard Model background yield is observed. Exclusion limits at 95 % confidence level on the mass of the bottom squark are derived in phenomenological supersymmetric R-parity-conserving models in which the [Formula: see text] is the lightest squark and is assumed to decay exclusively via [Formula: see text], where [Formula: see text] is the lightest neutralino. The limits significantly extend previous results; bottom squark masses up to 800 (840) GeV are excluded for the [Formula: see text] mass below 360 (100) GeV whilst differences in mass above 100 GeV between the [Formula: see text] and the [Formula: see text] are excluded up to a [Formula: see text] mass of 500 GeV.

Search for new phenomena in different-flavour high-mass dilepton final states in pp collisions at [Formula: see text] Tev with the ATLAS detector

A search is performed for a heavy particle decaying into different flavour dilepton pairs ([Formula: see text], [Formula: see text] or [Formula: see text]), using 3.2 fb[Formula: see text] of proton-proton collision data at [Formula: see text] TeV collected in 2015 by the ATLAS detector at the Large Hadron Collider. No excess over the Standard Model prediction is observed. Limits at the 95 % credibility level are set on the mass of a [Formula: see text] boson with lepton-flavour-violating couplings at 3.0, 2.7 and 2.6 TeV, and on the mass of a supersymmetric [Formula: see text] sneutrino with R-parity-violating couplings at 2.3, 2.2 and 1.9 TeV, for [Formula: see text], [Formula: see text] and [Formula: see text] final states, respectively. The results are also interpreted as limits on the threshold mass for quantum black hole production.

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton-proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon-nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction.

Search for supersymmetry in a final state containing two photons and missing transverse momentum in [Formula: see text] = 13 TeV [Formula: see text] collisions at the LHC using the ATLAS detector

A search has been made for supersymmetry in a final state containing two photons and missing transverse momentum using the ATLAS detector at the Large Hadron Collider. The search makes use of [Formula: see text] of proton-proton collision data collected at a centre-of-mass energy of 13 TeV in 2015. Using a combination of data-driven and Monte-Carlo-based approaches, the Standard Model background is estimated to be [Formula: see text] events. No events are observed in the signal region; considering the expected background and its uncertainty, this observation implies a model-independent 95 % CL upper limit of 0.93 fb (3.0 events) on the visible cross section due to physics beyond the Standard Model. In the context of a generalized model of gauge-mediated supersymmetry breaking with a bino-like next-to-lightest supersymmetric particle, this leads to a lower limit of 1650 GeV on the mass of a degenerate octet of gluino states, independent of the mass of the lighter bino-like neutralino.

Study of the rare decays of [Formula: see text] and [Formula: see text] into muon pairs from data collected during the LHC Run 1 with the ATLAS detector

A study of the decays [Formula: see text] and [Formula: see text] has been performed using data corresponding to an integrated luminosity of 25 fb[Formula: see text] of 7 and 8 TeV proton-proton collisions collected with the ATLAS detector during the LHC Run 1. For the [Formula: see text] dimuon decay, an upper limit on the branching fraction is set at [Formula: see text] at 95 % confidence level. For [Formula: see text], the branching fraction [Formula: see text] is measured. The results are consistent with the Standard Model expectation with a p value of 4.8 %, corresponding to 2.0 standard deviations.

Charged-particle distributions at low transverse momentum in [Formula: see text] TeV pp interactions measured with the ATLAS detector at the LHC

Measurements of distributions of charged particles produced in proton-proton collisions with a centre-of-mass energy of 13 TeV are presented. The data were recorded by the ATLAS detector at the LHC and correspond to an integrated luminosity of 151 [Formula: see text]. The particles are required to have a transverse momentum greater than 100 MeV and an absolute pseudorapidity less than 2.5. The charged-particle multiplicity, its dependence on transverse momentum and pseudorapidity and the dependence of the mean transverse momentum on multiplicity are measured in events containing at least two charged particles satisfying the above kinematic criteria. The results are corrected for detector effects and compared to the predictions from several Monte Carlo event generators.

Search for Higgs and Z Boson Decays to ϕγ with the ATLAS Detector

A search for the decays of the Higgs and Z bosons to a ϕ meson and a photon is performed with a pp collision data sample corresponding to an integrated luminosity of 2.7  fb^{-1} collected at sqrt[s]=13  TeV with the ATLAS detector at the LHC. No significant excess of events is observed above the background, and 95% confidence level upper limits on the branching fractions of the Higgs and Z boson decays to ϕγ of 1.4×10^{-3} and 8.3×10^{-6}, respectively, are obtained.

Search for single production of vector-like quarks decaying into Wb in pp collisions at [Formula: see text] TeV with the ATLAS detector

A search for singly produced vector-like Q quarks, where Q can be either a T quark with charge [Formula: see text] or a Y quark with charge [Formula: see text], is performed in proton-proton collisions recorded with the ATLAS detector at the LHC. The dataset corresponds to an integrated luminosity of 20.3 fb[Formula: see text] and was produced with a centre-of-mass energy of [Formula: see text] TeV. This analysis targets [Formula: see text] decays where the W boson decays leptonically. A veto on massive large-radius jets is used to reject the dominant [Formula: see text] background. The reconstructed Q-candidate mass, ranging from 0.4 to 1.2 TeV, is used in the search to discriminate signal from background processes. No significant deviation from the Standard Model expectation is observed, and limits are set on the [Formula: see text] cross-section times branching ratio. The results are also interpreted as limits on the QWb coupling and the mixing with the Standard Model sector for a singlet T quark or a Y quark from a doublet. T quarks with masses below 0.95 TeV are excluded at 95 % confidence level, assuming a unit coupling and a BR[Formula: see text], whereas the expected limit is 1.10 TeV.