Porous Organic Polymers for Efficient and Selective SO2 Capture from CO2-rich Flue Gas

The quest for effective technologies to reduce SO2 pollution is crucial due to its adverse effects on the environment and human health. Markedly, removing a ppm level of SO2 from CO2-containing waste gas is a persistent challenge, and current technologies suffer from low SO2/CO2 selectivity and energy-intensive regeneration processes. Here using the molecular building blocks approach and theoretical calculation, we constructed two porous organic polymers (POPs) encompassing pocket-like structures with exposed imidazole groups, promoting preferential interactions with SO2 from CO2-containing streams. Markedly, the evaluated POPs offer outstanding SO2/CO2 selectivity, high SO2 capacity, and an easy regeneration process, making it one of the best materials for SO2 capture. To gain better structural insights into the notable SO2 selectivity of the POPs, we used dynamic nuclear polarization NMR spectroscopy (DNP) and molecular modelling to probe the interactions between SO2 and POP adsorbents. The newly developed materials are poised to offer an energy-efficient and environment-friendly SO2 separation process while we are obliged to use fossil fuels for our energy needs.

Tracking the Impact of Koch-Carbonylated Organics During the Zeolite ZSM-5 Catalyzed Methanol-to-Hydrocarbons Process

A methanol-based economy offers an efficient solution to current energy transition challenges, where the zeolite-catalyzed methanol-to-hydrocarbons (MTH) process would be a key enabler in yielding synthetic fuels/chemicals from renewable sources. Despite its original discovery over half a century ago over the zeolite ZSM-5, the practical application of this process in a CO2 -neutral scenario has faced several obstacles. One prominent challenge has been the intricate mechanistic complexities inherent in the MTH process over the zeolite ZSM-5, impeding its widespread adoption. This work takes a significant step forward by providing critical insights that bridge the gap in our understanding of the MTH process. It accomplishes this by connecting the (Koch-carbonylation-led) direct and dual cycle mechanisms, which operate during the early and steady-state phases of MTH catalysis, respectively. To unravel these mechanistic intricacies, we have performed catalytic and operando (i.e., UV/Vis coupled with an online mass spectrometer) and solid-state NMR spectroscopic-based investigations on the MTH process, involving co-feeding methanol and acetone (cf. a key Koch-carbonylated species), including selective isotope-labeling studies. Our iterative research approach revealed that (Koch-)carbonyl group selectively promotes the side-chain mechanism within the arene cycle of the dual cycle mechanism, impacting the preferential formation of BTX fraction (i.e., benzene-toluene-xylene) primarily.

Catalyst switch strategy enabled a single polymer with five different crystalline phases

Well-defined multicrystalline multiblock polymers are essential model polymers for advancing crystallization physics, phase separation, self-assembly, and improving the mechanical properties of materials. However, due to different chain properties and incompatible synthetic methodologies, multicrystalline multiblock polymers with more than two crystallites are rarely reported. Herein, by combining polyhomologation, ring-opening polymerization, and catalyst switch strategy, we synthesized a pentacrystalline pentablock quintopolymer, polyethylene-b-poly(ethylene oxide)-b-poly(ε-caprolactone)-b-poly(L-lactide)-b-polyglycolide (PE-b-PEO-b-PCL-b-PLLA-b-PGA). The fluoroalcohol-assisted catalyst switch enables the successful incorporation of a high melting point polyglycolide block into the complex multiblock structure. Solid-state nuclear magnetic resonance spectroscopy, X-ray diffraction, and differential scanning calorimetry revealed the existence of five different crystalline phases.

A strategy for high ethylene polymerization performance using titanium single-site catalysts

The synthesis of heterogeneous Ti(IV)-based catalysts for ethylene polymerization following surface organometallic chemistry concepts is described. The unique feature of this catalyst arises from the silica support, KCC-1700. It has (i) a 3D fibrous morphology that is essential to improve the diffusion of the reactants, and (ii) an aluminum-bound hydroxyl group, [(Si-O-Si)(Si-O-)2Al-OH] 2, used as an anchoring site. The [(Si-O-Si)(Si-O-)(Al-O-)TiNp3] 3 catalyst was obtained by reacting 2 with a tetrakis-(neopentyl) titanium TiNp4. The structure of 3 was fully characterized by FT-IR, advanced solid-state NMR spectroscopy [1H, 13C], elemental and gas-phase analysis (ICP-OES and CHNS analysis), and XPS. The benefits of combining these morphological (3D structure) and electronic properties of the support (aluminum plus titanium) were evidenced in ethylene polymerization. The results show a remarkable enhancement in the catalytic performance with the formation of HDPE. Notably, the resulting HDPE displays a molecular weight of 3 200 000 g mol-1 associated with a polydispersity index (PD) of 2.3. Moreover, the effect of the mesostructure (2D vs. 3D) was demonstrated in the catalytic activity for ethylene polymerization.

Mapping Methanol-to-Gasoline Process Over Zeolite Beta

Decarbonizing the transportation sector is among the biggest challenges in the fight against climate change. CO2-neutral fuels, such as those obtained from renewable methanol, have the potential to account for a large share of the solution, since these could be directly compatible with existing power trains. Although discovered in 1977, the zeolite-catalyzed methanol-to-gasoline (MTG) process has hardly reached industrial maturity, among other reasons, because maximizing the production of gasoline range hydrocarbons from methanol has proved complicated. In this work, we apply multimodal operando UV-Vis diffuse reflectance spectroscopy coupled with an online mass spectrometer and "mobility-dependent" solid-state NMR spectroscopy to better understand the reaction mechanism over zeolites H-Beta and Zn-Beta. Significantly, the influential co-catalytic role of oxymethylene species is linked to gasoline formation, which impacts the MTG process more than carbonylated species.

Polytriazole membranes with ultrathin tunable selective layer for crude oil fractionation

The design of materials and their manufacture into membranes that can handle industrial conditions and separate complex nonaqueous mixtures are challenging. We report a versatile strategy to fabricate polytriazole membranes with 10-nanometer-thin selective layers containing subnanometer channels for the separation of hydrocarbons. The process involves the use of the classical nonsolvent-induced phase separation method and thermal cross-linking. The membrane selectivity can be tuned to the lower end of the typical nanofiltration range (200 to 1000 gram mole^-1). The polytriazole membrane can enrich up to 80 to 95% of the hydrocarbon content with less than 10 carbon atoms (140 gram mole^-1). These membranes preferentially separate paraffin over aromatic components, making them suitable for integration in hybrid distillation systems for crude oil fractionation.

Asymmetric pore windows in MOF membranes for natural gas valorization

To use natural gas as a feedstock alternative to coal and oil, its main constituent, methane, needs to be isolated with high purity¹. In particular, nitrogen dilutes the heating value of natural gas and is, therefore, of prime importance for removal². However, the inertness of nitrogen and its similarities to methane in terms of kinetic size, polarizability and boiling point pose particular challenges for the development of energy-efficient nitrogen-removing processes³. Here we report a mixed-linker metal-organic framework (MOF) membrane based on fumarate (fum) and mesaconate (mes) linkers, Zr-fum₆₇-mes₃₃-fcu-MOF, with a pore aperture shape specific for effective nitrogen removal from natural gas. The deliberate introduction of asymmetry in the parent trefoil-shaped pore aperture induces a shape irregularity, blocking the transport of tetrahedral methane while allowing linear nitrogen to permeate. Zr-fum₆₇-mes₃₃-fcu-MOF membranes exhibit record-high nitrogen/methane selectivity and nitrogen permeance under practical pressures up to 50 bar, removing both carbon dioxide and nitrogen from natural gas. Techno-economic analysis shows that our membranes offer the potential to reduce methane purification costs by about 66% for nitrogen rejection and about 73% for simultaneous removal of carbon dioxide and nitrogen, relative to cryogenic distillation and amine-based carbon dioxide capture.

Foldable Solid-State Batteries Enabled by Electrolyte Mediation in Covalent Organic Frameworks

Solid-state electrolytes with high Li⁺ conductivity, flexibility, durability, and stability offer an attractive solution to enhance safety and energy density. However, meeting these stringent requirements poses challenges to the existing solid polymeric or ceramic electrolytes. Here, an electrolyte-mediated single-Li⁺ -conductive covalent organic framework (COF) is presented, which represents a new category of quality solid-state Li⁺ conductors. In situ solidification of a tailored liquid electrolyte boosts the charge-carrier concentration in the COF channels, decouples Li⁺ cations from both COF walls and molecular chains, and eliminates defects by crystal soldering. Such an altered microenvironment activates the motion of Li⁺ ions in a directional manner, which leads to an increase in Li⁺ conductivity by 100 times with a transference number of 0.85 achieved at room temperature. Moreover, the electrolyte conversion cements the ultrathin COF membrane with fortified mechanical toughness. With the COF membrane, foldable solid-state pouch cells are demonstrated.

Selectivity descriptors for the direct hydrogenation of CO2 to hydrocarbons during zeolite-mediated bifunctional catalysis

Cascade processes are gaining momentum in heterogeneous catalysis. The combination of several catalytic solids within one reactor has shown great promise for the one-step valorization of C1-feedstocks. The combination of metal-based catalysts and zeolites in the gas phase hydrogenation of CO2 leads to a large degree of product selectivity control, defined mainly by zeolites. However, a great deal of mechanistic understanding remains unclear: metal-based catalysts usually lead to complex product compositions that may result in unexpected zeolite reactivity. Here we present an in-depth multivariate analysis of the chemistry involved in eight different zeolite topologies when combined with a highly active Fe-based catalyst in the hydrogenation of CO2 to olefins, aromatics, and paraffins. Solid-state NMR spectroscopy and computational analysis demonstrate that the hybrid nature of the active zeolite catalyst and its preferred CO2-derived reaction intermediates (CO/ester/ketone/hydrocarbons, i.e., inorganic-organic supramolecular reactive centers), along with 10 MR-zeolite topology, act as descriptors governing the ultimate product selectivity.

Highly Active Heterogeneous Catalyst for Ethylene Dimerization Prepared by Selectively Doping Ni on the Surface of a Zeolitic Imidazolate Framework

The production of 1-butene by ethylene dimerization is an important chemical industrial process currently implemented using homogeneous catalysts. Here, we describe a highly active heterogeneous catalyst (Ni-ZIF-8) for ethylene dimerization, which consists of isolating Ni-active sites selectively located on the crystal surface of a zeolitic imidazolate framework. Ni-ZIF-8 can be easily prepared by a simple one-pot synthesis method in which site-specific anchoring of Ni is achieved spontaneously because of the incompatibility between the d⁸ electronic configuration of Ni²⁺ and the three-dimensional framework of ZIF-8. The full exposure and square-planar coordination of the Ni sites accounts for the high catalytic activity of Ni-ZIF-8. It exhibits an average ethylene turnover frequency greater than 1 000 000 h^-1 (1-butene selectivity >85%) at 35 °C and 50 bar, far exceeding the activities of previously reported heterogeneous catalysts and many homogeneous catalysts under similar conditions. Moreover, compared to molecular Ni complexes used as homogeneous catalysts for ethylene dimerization, Ni-ZIF-8 has significantly higher stability and shows constant activity during 4 h of continuous reaction. Isotopic labeling experiments indicate that ethylene dimerization over Ni-ZIF-8 follows the Cossee-Arlman mechanism, and detailed characterizations combined with density functional theory calculations rationalize this observed high activity.

The Importance of Thermal Treatment on Wet-Kneaded Silica-Magnesia Catalyst and Lebedev Ethanol-to-Butadiene Process

The Lebedev process, in which ethanol is catalytically converted into 1,3-butadiene, is an alternative process for the production of this commodity chemical. Silica-magnesia (SiO2-MgO) is a benchmark catalyst for the Lebedev process. Among the different preparation methods, the SiO2-MgO catalysts prepared by wet-kneading typically perform best owing to the surface magnesium silicates formed during wet-kneading. Although the thermal treatment is of pivotal importance as a last step in the catalyst preparation, the effect of the calcination temperature of the wet-kneaded SiO2-MgO on the Lebedev process has not been clarified yet. Here, we prepared and characterized in detail a series of wet-kneaded SiO2-MgO catalysts using varying calcination temperatures. We find that the thermal treatment largely influences the type of magnesium silicates, which have different catalytic properties. Our results suggest that the structurally ill-defined amorphous magnesium silicates and lizardite are responsible for the production of ethylene. Further, we argue that forsterite, which has been conventionally considered detrimental for the formation of ethylene, favors the formation of butadiene, especially when combined with stevensite.

Titanium methyl tamed on silica: synthesis of a well-defined pre-catalyst for hydrogenolysis of n-alkane

Alkylation of Ti(CH₃)₂Cl₂1 by MeLi gives the homoleptic Ti(CH₃)₄2 for the first time in the absence of any coordinating solvent. The reaction of 2 with silica pretreated at 700 °C (SiO_2-700) gives two inequivalent silica-supported Ti-methyl species 3. Complex 3 was characterized by IR, microanalysis (ICP-OES, CHNS, and gas quantification), and advanced solid-state NMR spectroscopy (¹H, ¹³C, DQ, TQ, and HETCOR). The catalytic activity of the pre-catalyst 3 is investigated in low-temperature hydrogenolysis of propane and n-butane with TONs of 419 and 578, respectively.

Smart covalent organic networks (CONs) with "on-off-on" light-switchable pores for molecular separation

Development of the new-generation membranes for tunable molecular separation requires materials with abilities beyond strict separation. Stimuli response could remotely adjust the membrane selectivity. Azobenzene derivatives can be photo-switched between trans and cis isomers under ultraviolet or visible light. Here, the azobenzenes were implanted as light switches to bridge the flexible cyclen building blocks. The smart covalent organic network membranes fold and unfold as origami that can be photo-switched between on-state (large) and off-state (small) pores. The cis membranes with off state under ultraviolet (UV) light have higher dye rejection than trans membranes with on-state channels. By controlling the trans-to-cis azobenzene isomerization via UV/Vis light, the pore size can be remotely controlled at the molecular level and the solvent permeance and dye rejection can be dynamically tuned.

Highly Stable Phosphonate-Based MOFs with Engineered Bandgaps for Efficient Photocatalytic Hydrogen Production

Photoactive metal-organic frameworks (MOFs) represent one of the most promising materials for photocatalytic hydrogen production, but phosphonate-based MOFs have remained largely underdeveloped compared to other conventional MOFs. Herein, a photocatalyst of 1D titanium phosphonate MOF is designed through an easy and scalable stirring hydrothermal method. Homogeneous incorporation of organophosphonic linkers can narrow the bandgap, which is due to the strong electron-donating ability of the OH functional group that can efficiently shift the top of the valence band, moving the light absorption to the visible portion of the spectrum. In addition, the unique 1D nanowire topology enhances the photoinduced charge carrier transport and separation. Accordingly, the titanium phosphonate nanowires deliver remarkably enhanced photocatalytic hydrogen evolution activity under irradiation of both visible light and a full-spectrum simulator. Such concepts of engineering both nanostructures and electronic states herald a new paradigm for designing MOF-based photocatalysts.

Docking of tetra-methyl zirconium to the surface of silica: a well-defined pre-catalyst for conversion of CO2 to cyclic carbonates

The metal complex (Zr(CH3)4(THF)2) has been fully synthesized, characterized and grafted onto partially dehydroxylated silica to give two surface species [([triple bond, length as m-dash]Si-O-)Zr(CH3)3(THF)2] (minor) and [([triple bond, length as m-dash]Si-O-)2Zr(CH3)2(THF)2] (major) which have been characterized by SS NMR, IR, and elemental analysis. These supported pre-catalysts exhibit the best conversion of CO2 to cyclic carbonates, as compared to the previously reported SOMC catalysts.

Impact of small promoter amounts on coke structure in dry reforming of methane over Ni/ZrO2

Choosing the correct alkali metal as a promoter not only reduces coke formation in dry reforming of methane but also removes coke via gasification.

Non-oxidative dehydrogenation of isobutane over supported vanadium oxide: nature of the active sites and coke formation

We combine Raman spectroscopy, EPR, XPS, temperature programmed reduction, XRD, ⁵¹V MAS ssNMR, TEM and N₂-physisorption to unravel structure–activity relationships during the non-oxidative dehydrogenation of isobutane over a V based catalyst.

Coated sulfated zirconia/SAPO-34 for the direct conversion of CO2 to light olefins

The conversion of CO₂ to light olefins via bifunctional catalysts (i.e. metal oxides/zeolites) is a promising approach to tackle CO₂ emissions and, at the same time, reduce fossil-fuel dependence by closing the carbon cycle.

Chemical and Structural Analysis of Carbon Materials Subjected to Alkaline Oxidation

Redox species such as transition metals may, unknowingly, integrate carbon materials that are produced (or supplied) for the assembling of electrodes in batteries, supercapacitors, and fuel cells. The extent to which these species alter the electrochemical profile of carbons and affect the performance and/or degradation of energy storage systems is still not fully appreciated. Alkaline oxidation (or fusion) is a promising approach to disintegrate nanocarbons for the subsequent study of their chemical composition by routine analytical tools. In this work, three commercial carbon powders, relevant for electrochemical applications and bearing varied textural orientation (point, radial, and planar), were selected to evaluate the versatility of fusion as a pretreatment process for elemental analysis. Additionally, the interaction of the flux, a lithium borate salt, with the carbons was elucidated by examining their post-fusion residues. The degree of structural degradation varied and, generally, the doping with Li and/or B (whether substitutional or interstitial) was low to nonexistent. With future developments, fusion could become a relevant pretreatment method to analyze the composition of carbon materials, even when complex mixtures (e.g., cycled battery electrodes) and larger batch scales are considered.

Tetracrystalline Tetrablock Quarterpolymers: Four Different Crystallites under the Same Roof

Multicrystalline block polymers having three or more crystalline segments are essential materials for the advancement of physics in the field of crystallinity. The challenging synthesis of multicrystalline polymers has resulted in only a limited number of tricrystalline terpolymers having been reported to date. We report, for the first time, the synthesis of polyethylene-b-poly(ethylene oxide)-b-poly(ϵ-caprolactone)-b-poly(l-lactide) (PE-b-PEO-b-PCL-b-PLLA), a tetracrystalline tetrablock quarterpolymer, by combining polyhomologation, ring-opening polymerization, and an organic/metal "catalyst switch" strategy. ¹ H NMR spectroscopy and gel-permeation chromatography confirmed the formation of the tetrablock quarterpolymer, while differential scanning calorimetry, X-ray diffraction, and wide-line separation solid-state NMR spectroscopy revealed the existence of four different crystalline domains.

Surface enhanced dynamic nuclear polarization solid-state NMR spectroscopy sheds light on Brønsted-Lewis acid synergy during the zeolite catalyzed methanol-to-hydrocarbon process

After a prolonged effort over two decades, the reaction mechanism of the zeolite-catalyzed methanol-to-hydrocarbon (MTH) process is now well-understood: the so-called 'direct mechanism' (via direct coupling of two methanol molecules) is responsible for the formation of the initial carbon-carbon bonds, while the hydrocarbon pool (HCP)-based dual cycle mechanism is responsible for the formation of reaction products. While most of the reaction events occur at zeolite Brønsted acid sites, the addition of Lewis acid sites (i.e., via the introduction of alkaline earth cations like calcium) has been shown to inhibit the formation of deactivating coke species and hence increase the catalyst lifetime. With the aim to have an in-depth mechanistic understanding, herein, we employ magic angle spinning surface-enhanced dynamic nuclear polarization solid-state NMR spectroscopy to illustrate that the inclusion of Lewis acidity prevents the formation of carbene/ylide species on the zeolite, directly affecting the equilibrium between arene and olefin cycles of the HCP mechanism and hence regulating the ultimate product selectivity and catalyst lifetime.

A Supramolecular View on the Cooperative Role of Brønsted and Lewis Acid Sites in Zeolites for Methanol Conversion

A systematic molecular level and spectroscopic investigation is presented to show the cooperative role of Brønsted acid and Lewis acid sites in zeolites for the conversion of methanol. Extra-framework alkaline-earth metal containing species and aluminum species decrease the number of Brønsted acid sites, as protonated metal clusters are formed. A combined experimental and theoretical effort shows that postsynthetically modified ZSM-5 zeolites, by incorporation of extra-framework alkaline-earth metals or by demetalation with dealuminating agents, contain both mononuclear [MOH]⁺ and double protonated binuclear metal clusters [M(μ-OH)₂M]²⁺ (M = Mg, Ca, Sr, Ba, and HOAl). The metal in the extra-framework clusters has a Lewis acid character, which is confirmed experimentally and theoretically by IR spectra of adsorbed pyridine. The strength of the Lewis acid sites (Mg > Ca > Sr > Ba) was characterized by a blue shift of characteristic IR peaks, thus offering a tool to sample Lewis acidity experimentally. The incorporation of extra-framework Lewis acid sites has a substantial influence on the reactivity of propene and benzene methylations. Alkaline-earth Lewis acid sites yield increased benzene methylation barriers and destabilization of typical aromatic intermediates, whereas propene methylation routes are less affected. The effect on the catalytic function is especially induced by the double protonated binuclear species. Overall, the extra-framework metal clusters have a dual effect on the catalytic function. By reducing the number of Brønsted acid sites and suppressing typical catalytic reactions in which aromatics are involved, an optimal propene selectivity and increased lifetime for methanol conversion over zeolites is obtained. The combined experimental and theoretical approach gives a unique insight into the nature of the supramolecular zeolite catalyst for methanol conversion which can be meticulously tuned by subtle interplay of Brønsted and Lewis acid sites.

A strategy to convert propane to aromatics (BTX) using TiNp4 grafted at the periphery of ZSM-5 by surface organometallic chemistry

The direct conversion of propane into aromatics (BTX) using modified ZSM-5 was achieved with a strategy of "catalysis by design". In contrast to the classical mode of action of classical aromatization catalysts which are purely based on acidity, we have designed the catalyst associating two functions: One function (Ti-hydride) was selected to activate the C-H bond of propane by σ-bond metathesis to further obtain olefin by β-H elimination and the other function (Brønsted acid) being responsible for the oligomerization, cyclization, and aromatization. This bifunctional catalyst was obtained by selectively grafting a bulky organometallic complex of tetrakis(neopentyl)titanium (TiNp4) at the external surface (external silanol ([triple bond, length as m-dash]Si-OH) group) of [H-ZSM-5300] to obtain [Ti/ZSM-5] catalyst 1. This metal was chosen to activate the C-H bond of paraffin at the periphery of the ZSM-5 while maintaining the Brønsted acid properties of the internal [H-ZSM-5] for oligomerization, cyclization, and aromatization. Catalyst 2 [Ti-H/ZSM-5] was obtained after treatment under H2 at 550 °C of freshly prepared catalyst 1 ([Ti/ZSM-5]) and catalyst 1 was thoroughly characterized by ICP analysis, DRIFT, XRD, N2-physisorption, multinuclear solid-state NMR, XPS and HR-TEM analysis including STEM imaging. The conversion of propane to aromatics was studied in a dynamic flow reactor. With the pristine [H-ZSM-5300] catalyst, the conversion of propane is very low. However, with [Ti-H/ZSM-5] catalyst 2 under the same reaction conditions, the conversion of propane remains significant during 60 h of the reaction (ca. 22%). Furthermore, the [Ti-H/ZSM-5] catalyst shows a good and stable selectivity (55%) for aromatics (BTX) of time on stream. With 2, it was found that the Ti remains at the periphery of the [H-ZSM-5] even after reaction time.

TiO2-supported Pt single atoms by surface organometallic chemistry for photocatalytic hydrogen evolution

Platinum single atoms are grafted by SOMC on morphology-controlled TiO₂. Their structure is characterized by EXAFS and other techniques, and their activity and stability in HER and backwards reaction are studied and compared to Pt nanoparticles.

Publisher Correction: Structure-performance descriptors and the role of Lewis acidity in the methanol-to-propylene process

In the version of this Article originally published, on the right side of Fig. 4b, the 'Aromatic cycle' label was erroneously shifted outside of the central circular arrow into a position on part of the reaction cycle. This has been corrected in the online versions of the Article.

Predicting the DNP-SENS efficiency in reactive heterogeneous catalysts from hydrophilicity

Identification of surfaces at the molecular level has benefited from progress in dynamic nuclear polarization surface enhanced NMR spectroscopy (DNP SENS).

Identification of surfaces at the molecular level has benefited from progress in dynamic nuclear polarization surface enhanced NMR spectroscopy (DNP SENS). However, the technique is limited when using highly sensitive heterogeneous catalysts due to secondary reaction of surface organometallic fragments (SOMFs) with stable radical polarization agents. Here, we observe that in non-porous silica nanoparticles (NPs) (d_particle = 15 nm) some DNP enhanced NMR or SENS characterizations are possible, depending on the metal-loading of the SOMF and the type of SOMF substituents (methyl, isobutyl, neopentyl). This unexpected observation suggests that aggregation of the nanoparticles occurs in non-polar solvents (such as ortho-dichlorobenzene) leading to (partial) protection of the SOMF inside the interparticle space, thereby preventing reaction with bulky polarization agents. We discover that the DNP SENS efficiency is correlated with the hydrophilicity of the SOMF/support, which depends on the carbon and SOMF concentration. Nitrogen sorption measurements to determine the BET constant (C_BET) were performed. This constant allows us to predict the aggregation of silica nanoparticles and consequently the efficiency of DNP SENS. Under optimal conditions, C_BET > 60, we found signal enhancement factors of up to 30.

On the dynamic nature of Mo sites for methane dehydroaromatization

The dynamic catalytic site on Mo/HZSM-5 for methane dehydroaromatization is formed during the initial phases of the reaction. Labelling experiments show that carbon from the carbidic active site is incorporated into the final products.

The mechanism of methane activation on Mo/HZSM-5 is not yet fully understood, despite the great interest in methane dehydroaromatization (MDA) to replace aromatics production in oil refineries. It is difficult to assess the exact nature of the active site due to fast coking. By pre-carburizing Mo/HZSM-5 with carbon monoxide (CO), the MDA active site formation was isolated from coke formation. With this a clear ¹³C NMR signal solely from the active site and not obscured by coke was obtained, and it revealed two types of likely molecular Mo (oxy-)carbidic species in addition to the β-Mo₂C nanoparticles often mentioned in the literature. Furthermore, separating the active site formation from coking by pre-carburization helped us examine how methane is activated on the catalytic site by carrying out MDA using isotopically labelled methane (¹³CH₄). Carbon originating from the pre-formed carbide was incorporated into the main products of the reaction, ethylene and benzene, demonstrating the dynamic behavior of the (oxy-)carbidic active sites.

Exploiting the interactions between the ruthenium Hoveyda-Grubbs catalyst and Al-modified mesoporous silica: the case of SBA15 vs. KCC-1

2^nd generation Hoveyda–Grubbs catalyst immobilized onto well-ordered 2D hexagonal (SBA15) and 3D fibrous (KCC-1) mesostructured silica displaying tetra-coordinated Al–H via Surface Organometallic Chemistry (SOMC).

Immobilization of the 2^nd generation Hoveyda–Grubbs catalyst HG-II onto well-ordered 2D hexagonal (SBA15) and 3D fibrous (KCC-1) mesostructured silica, which contained tetra-coordinated Al, has been investigated through the Surface Organometallic Chemistry (SOMC) methodology. The main interest of this study lies in the peculiarity of the silica supports, which display a well-defined tetrahedral aluminum hydride site displaying a strong Lewis acid character, [( Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> Si–O–Si Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> )( Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> Si–O–)₂Al–H]. The resulting supported Hoveyda–Grubbs catalysts have been fully characterized by advanced solid state characterization techniques (FT-IR, ¹H and ¹³C solid state NMR, DNP-SENS, EF-TEM…). Together with DFT calculations, the immobilization of HG-II does not occur through the formation of a covalent bond between the complex and the Al-modified mesoporous silica as expected, but through an Al···Cl–[Ru]-coordination. It is not surprising that in functionalized olefin metathesis of diethyldiallyl malonate, DEDAM (liquid phase), leaching of the catalyst is observed which is not the case in non-functionalized olefin metathesis of propene (gas phase). Besides, the results obtained in propene metathesis with HG-II immobilized either on SBA15 (d_pore = 6 nm) or KCC-1 (d_pore = 4 or 8 nm) highlight the importance of the accessibility of the catalytic site. Therefore, we demonstrate that KCC-1 is a promising and suitable 3D mesoporous support to overcome the diffusion of reactants into the porous network of heterogeneous catalysts.

Clean chlorination of silica surfaces by a single-site substitution approach

A chlorination method for the selective substitution of well-defined isolated silanol groups of the silica surface has been developed using the catalytic Appel reaction. Spectroscopic analysis, complemented by elemental microanalysis studies, reveals that a quantitative chlorination could be achieved with highly dehydroxylated silica materials that exclusively possess non-hydrogen bonded silanol groups. The employed method did not leave any carbon or phosphorus residue on the silica surface and can be regarded as a promising tool for the future functionalization of metal oxide surfaces.

Synthesis and characterization of a homogeneous and silica supported homoleptic cationic tungsten(vi) methyl complex: application in olefin metathesis

A method for the synthesis of a homogeneous cationic tungsten(vi)pentamethyl complex [(WMe₅)⁺(C₆F₅)₃BMe^-] from neutral tungstenhexamethyl (WMe₆) and a silica supported cationic tungstentetramethyl complex [([triple bond, length as m-dash]Si-O-)WMe₄⁺ (C₆F₅)₃BMe^-] from a neutral silica supported tungstenpentamethyl complex [([triple bond, length as m-dash]Si-O-)WMe₅] is described. In both cases a direct demethylation using the B(C₆F₅)₃ reagent was used. The aforesaid complexes were characterized by liquid or solid state NMR spectroscopy. Interestingly, the homogeneous cationic complex [(WMe₅)⁺(C₆F₅)₃BMe^-] shows moderate activity whereas the supported cationic complex [([triple bond, length as m-dash]Si-O-)WMe₄⁺(C₆F₅)₃BMe^-] exhibits good activity in olefin metathesis reactions.

Morphology control of anatase TiO2 for well-defined surface chemistry

Surface hydroxyls of titanium dioxide (anatase) are studied by infrared spectroscopy, density functional theory and nuclear magnetic resonance. They are found to be dependent on morphology and fluoride content.

SOMC grafting of vanadium oxytriisopropoxide (VO(OiPr)3) on dehydroxylated silica; analysis of surface complexes and thermal restructuring mechanism

VO(OⁱPr)₃ was grafted on highly dehydroxylated silica by a surface organometallic chemistry approach and its thermal evolution was analyzed with support of DFT calculations.

From single-site tantalum complexes to nanoparticles of Ta x N y and TaO x N y supported on silica: elucidation of synthesis chemistry by dynamic nuclear polarization surface enhanced NMR spectroscopy and X-ray absorption spectroscopy

Air-stable catalysts consisting of tantalum nitride nanoparticles represented as a mixture of Ta x N y and TaO x N y with diameters in the range of 0.5 to 3 nm supported on highly dehydroxylated silica were synthesized from TaMe5 (Me = methyl) and dimeric Ta2(OMe)10 with guidance by the principles of surface organometallic chemistry (SOMC). Characterization of the supported precursors and the supported nanoparticles formed from them was carried out by IR, NMR, UV-Vis, extended X-ray absorption fine structure, and X-ray photoelectron spectroscopies complemented with XRD and high-resolution TEM, with dynamic nuclear polarization surface enhanced NMR spectroscopy being especially helpful by providing enhanced intensities of the signals of 1H, 13C, 29Si, and 15N at their natural abundances. The characterization data provide details of the synthesis chemistry, including evidence of (a) O2 insertion into Ta-CH3 species on the support and (b) a binuclear to mononuclear transformation of species formed from Ta2(OMe)10 on the support. A catalytic test reaction, cyclooctene epoxidation, was used to probe the supported nanoparticles, with 30% H2O2 serving as the oxidant. The catalysts gave selectivities up to 98% for the epoxide at conversions as high as 99% with a 3.4 wt% loading of Ta present as Ta x N y /TaO x N y .